public function operate(kOperator $operator = null, $inFilePath, $configFilePath = null)
{
$res = parent::operate($operator, $inFilePath, $configFilePath);
if ($res == false) {
return false;
}
$rvPath = pathinfo($inFilePath);
$fileName = $rvPath['filename'];
$baseName = $rvPath['basename'];
$ismStr = file_get_contents("{$this->outFilePath}.ism");
$ismStr = str_replace(array("{$this->outFilePath}.ismc", $inFilePath), array("{$fileName}.ismc", $baseName), $ismStr);
file_put_contents("{$this->outFilePath}.ism", $ismStr);
$rv = mkdir($this->outFilePath . "_tmpism", 0777);
if ($rv == false) {
return false;
}
$newIsmBaseName = $this->outFilePath . "_tmpism/{$fileName}";
rename("{$this->outFilePath}.ism", "{$newIsmBaseName}.ism");
rename("{$this->outFilePath}.ismc", "{$newIsmBaseName}.ismc");
$fsDescArr = array();
$fsDesc = new KalturaDestFileSyncDescriptor();
$fsDesc->fileSyncLocalPath = "{$newIsmBaseName}.ism";
$fsDesc->fileSyncObjectSubType = 3;
//".ism";
$fsDescArr[] = $fsDesc;
$fsDesc = new KalturaDestFileSyncDescriptor();
$fsDesc->fileSyncLocalPath = "{$newIsmBaseName}.ismc";
$fsDesc->fileSyncObjectSubType = 4;
//".ismc";
$fsDescArr[] = $fsDesc;
$this->data->extraDestFileSyncs = $fsDescArr;
$this->data->destFileSyncLocalPath = null;
$this->outFilePath = null;
return $res;
}
protected function getCmdLine()
{
$exeCmd = parent::getCmdLine();
if (strstr($exeCmd, KDLOperatorMp4box::ACTION_EMBED_SUBTITLES) !== FALSE) {
$captionsStr = null;
// impersonite
KBatchBase::impersonate($this->job->partnerId);
$captionsStr = $this->buildSubTitleCommandParam($this->data);
// un-impersonite
KBatchBase::unimpersonate();
if (isset($captionsStr)) {
$exeCmd = str_replace(array(KDLOperatorMp4box::ACTION_EMBED_SUBTITLES, KDLOperatorMp4box::SUBTITLE_PLACEHOLDER), array("", $captionsStr), $exeCmd);
} else {
if (!(isset($this->operator) && isset($this->operator->isOptional) && $this->operator->isOptional > 0)) {
$this->message .= "." . print_r($this->operator, 1);
throw new KOperationEngineException($this->message);
}
}
} else {
if (strstr($exeCmd, KDLOperatorMp4box::ACTION_HINT) !== FALSE) {
$exeCmd = str_replace(KDLOperatorMp4box::ACTION_HINT, "", $exeCmd);
}
}
return $exeCmd;
}
protected function getCmdLine()
{
$cmdLine = parent::getCmdLine();
$cmdLine = KConversionEngineFfmpeg::experimentalFixing($cmdLine, $this->data->flavorParamsOutput, $this->cmd, $this->inFilePath, $this->outFilePath);
$cmdLine = KConversionEngineFfmpeg::expandForcedKeyframesParams($cmdLine);
$wmStr = strstr($this->operator->params, "watermark:");
if ($wmStr == false) {
return $cmdLine;
}
$wmStr = trim(substr($this->operator->params, strlen("watermark:")));
/*
* If no watermarkData, carry on
*/
if ($wmStr == null) {
return $cmdLine;
}
KalturaLog::log("Watermark string({$wmStr})");
$wmData = json_decode($wmStr);
if (!isset($wmData)) {
KalturaLog::err("Bad watermark JSON string({$wmStr}), carry on without watermark");
}
KalturaLog::log("Watermark data:\n" . print_r($wmData, 1));
// impersonite
KBatchBase::impersonate($this->data->flavorParamsOutput->partnerId);
// !!!!!!!!!!!$this->job->partnerId);
$wmCmdLine = KConversionEngineFfmpeg::buildWatermarkedCommandLine($wmData, $this->data->destFileSyncLocalPath, $cmdLine, KBatchBase::$taskConfig->params->ffmpegCmd, KBatchBase::$taskConfig->params->mediaInfoCmd);
// un-impersonite
KBatchBase::unimpersonate();
if (isset($wmCmdLine)) {
$cmdLine = $wmCmdLine;
}
return $cmdLine;
}
public function operate(kOperator $operator = null, $inFilePath, $configFilePath = null)
{
$qtInFilePath = "{$this->tmpFolder}/{$inFilePath}.stb";
if (symlink($inFilePath, $qtInFilePath)) {
$inFilePath = $qtInFilePath;
}
return parent::operate($operator, $inFilePath, $configFilePath);
}
public function operate(kOperator $operator = null, $inFilePath, $configFilePath = null)
{
$res = parent::operate($operator, $inFilePath, $configFilePath);
if ($res == false) {
return false;
}
$inPathInfo = pathinfo($inFilePath);
$inFileName = $inPathInfo['filename'];
$outPathInfo = pathinfo($this->outFilePath);
$outFileName = $outPathInfo['filename'];
$outBaseName = $outPathInfo['basename'];
$outFolderName = $outPathInfo['dirname'];
$auxOutName = "{$outFolderName}//{$inFileName}";
/*
* Update ISM manifest file with correct output file names
*/
$ismStr = file_get_contents($auxOutName . ".ism");
KalturaLog::info("Before file name update:\n{$ismStr}");
$ismXml = new SimpleXMLElement($ismStr);
$ismXml->head->meta['content'] = $outFileName . ".ismc";
if (isset($ismXml->body->switch->video)) {
$extStr = pathinfo((string) $ismXml->body->switch->video['src'], PATHINFO_EXTENSION);
$ismXml->body->switch->video['src'] = $outBaseName;
}
if (isset($ismXml->body->switch->audio)) {
$extStr = pathinfo((string) $ismXml->body->switch->audio['src'], PATHINFO_EXTENSION);
$ismXml->body->switch->audio['src'] = $outBaseName;
}
$ismStr = $ismXml->asXML();
KalturaLog::info("After file name update:\n{$ismStr}");
file_put_contents($auxOutName . ".ism", $ismStr);
/*
* Update the ISM/ISMC/ISMV file names to correct output file names
*/
rename($auxOutName . ".ism", "{$outFolderName}//{$outFileName}.ism");
rename($auxOutName . ".ismc", "{$outFolderName}//{$outFileName}.ismc");
if (isset($extStr)) {
rename($auxOutName . ".{$extStr}", "{$outFolderName}//{$outBaseName}");
} else {
rename($auxOutName, "{$outFolderName}//{$outBaseName}");
}
/*
* Notify batch job flow to bind the ISM/ISMC files to the asset
*/
$fsDescArr = array();
$fsDesc = new KalturaDestFileSyncDescriptor();
$fsDesc->fileSyncLocalPath = "{$outFolderName}//{$outFileName}.ism";
$fsDesc->fileSyncObjectSubType = 3;
//".ism";
$fsDescArr[] = $fsDesc;
$fsDesc = new KalturaDestFileSyncDescriptor();
$fsDesc->fileSyncLocalPath = "{$outFolderName}//{$outFileName}.ismc";
$fsDesc->fileSyncObjectSubType = 4;
//".ismc";
$fsDescArr[] = $fsDesc;
$this->data->extraDestFileSyncs = $fsDescArr;
return $res;
}
public function operate(kOperator $operator = null, $inFilePath, $configFilePath = null)
{
//$this->outFilePath = "k:".$this->outFilePath;
KalturaLog::debug("creating directory:" . $this->outFilePath);
kFile::fullMkfileDir($this->outFilePath, 0777, true);
$res = parent::operate($operator, $inFilePath, $configFilePath);
rename("{$this->outFilePath}//playlist.m3u8", "{$this->outFilePath}//playlist.tmp");
self::parsePlayList("{$this->outFilePath}//playlist.tmp", "{$this->outFilePath}//playlist.m3u8");
// rename("out_dummy.m3u8", "$this->outFilePath//out_dummy.m3u8");
// KalturaLog::info("operator($operator), inFilePath($inFilePath), configFilePath($configFilePath)");
return $res;
}
public function operate(kOperator $operator = null, $inFilePath, $configFilePath = null)
{
if (kFile::fullMkfileDir($this->outFilePath)) {
KalturaLog::debug('dir [' . $this->outFilePath . '] created');
//outFilePath will be the path to the directory in which the images will be saved.
$outDirPath = $this->outFilePath;
//imageMagick decides the format of the output file according to the outFilePath's extension.so the format need to be added.
$this->outFilePath = $this->outFilePath . DIRECTORY_SEPARATOR . basename($this->outFilePath) . self::LEADING_ZEROS_PADDING . '.' . $this->flavorParamsOutput->format;
} else {
KalturaLog::debug('failed to create [' . $this->outFilePath . '] directory');
throw new KOperationEngineException('failed to create [' . $this->outFilePath . '] directory');
}
parent::operate($operator, $inFilePath, $configFilePath);
$imagesListXML = $this->createImagesListXML($outDirPath);
kFile::setFileContent($outDirPath . DIRECTORY_SEPARATOR . self::IMAGES_LIST_XML_NAME, $imagesListXML->asXML());
kalturalog::info('images list xml [' . $outDirPath . DIRECTORY_SEPARATOR . self::IMAGES_LIST_XML_NAME . '] created');
}
public function operate(kOperator $operator = null, $inFilePath, $configFilePath = null)
{
/*
* The EE3 tends to lock the source file for a short period. Since the same source file might be used
* by number of transcoding process, occasionally, one of the transcoding processes gets denied on an
* attempt to access the source file.
* The code catches the Exceptions thrown by the KOperrationEngine.
* On exception caused by the above state - 3 retries are performed w/10sec delay in between.
* All other exceptions are 're-thrown'.
*
* Note: For PHP 5.3 the exception re-throw should be enhanced with 'e->getPrevious()'
*/
$ex = null;
for ($iEx = 0; $iEx < 3; $iEx++) {
try {
/*
* Successfull execution attempt
*/
parent::operate($operator, $inFilePath, $configFilePath);
return;
} catch (Exception $e) {
$ex = $e;
/*
* If there is no log file (to check the error type)
* - halt retries and re-through the same exception
*/
if (file_exists($this->logFilePath) == false) {
break;
}
// $usedMsg="Cannot access the file because it is being used by another process";
$usedMsg = "Cannot access the file because it is being used";
$logStr = $this->getLogData();
/*
* If the log does not contain the 'being used' error
* - halt retries and re-through the same exception
*/
if (strstr($logStr, $usedMsg) == false) {
break;
}
$secsToSleep = 10;
KalturaLog::info("EE3 failed with 'Cannot access the file because it is being used by another process'. Waiting {$secsToSleep} sec. Attempt:{$iEx}");
sleep($secsToSleep);
}
}
throw new KOperationEngineException($ex->getMessage(), $ex->getCode());
}
public function operate(kOperator $operator = null, $inFilePath, $configFilePath = null)
{
/*
* The EE3 tends to lock the source file for a short period. Since the same source file might be used
* by number of transcoding process, occasionally, one of the transcoding processes gets denied on an
* attempt to access the source file.
* The code catches the Exceptions thrown by the KOperrationEngine.
* On exception caused by the above state - 3 retries are performed w/10sec delay in between.
* All other exceptions are 're-thrown'.
*
* Note: For PHP 5.3 the exception re-throw should be enhanced with 'e->getPrevious()'
*/
$ex = null;
for ($iEx = 0; $iEx < 5; $iEx++) {
try {
/*
* Successfull execution attempt
*/
return parent::operate($operator, $inFilePath, $configFilePath);
} catch (Exception $e) {
$ex = $e;
$logStr = $this->getLogData();
/*
* 'Progress:100' in the log means that the conversion was completed successfully,
* and got hang on exit. An external script will hopefully kill the EE task.
* If the log contains the 'Progress:100' string, wait 10 sec and retry (up to 3 retries).
* Otherwise - halt retries and re-through the same exception
*/
if (strstr($logStr, "Progress:100") == false) {
break;
}
$secsToSleep = rand(10, 30);
KalturaLog::info("EE got hang up. Waiting {$secsToSleep} sec for next attempt. Attempt:{$iEx}");
sleep($secsToSleep);
}
}
throw new KOperationEngineException($ex->getMessage(), $ex->getCode());
}
public function operate(kOperator $operator = null, $inFilePath, $configFilePath = null)
{
KalturaLog::debug("document : operator [" . print_r($operator, true) . "] inFilePath [{$inFilePath}]");
if ($configFilePath) {
$configFilePath = realpath($configFilePath);
}
// bypassing PDF Creator for source PDF files
$inputExtension = strtolower(pathinfo($inFilePath, PATHINFO_EXTENSION));
if ($inputExtension == 'pdf' && !$this->flavorParamsOutput->readonly) {
KalturaLog::notice('Bypassing PDF Creator for source PDF files');
if (!@copy($inFilePath, $this->outFilePath)) {
$error = '';
if (function_exists('error_get_last')) {
$error = error_get_last();
}
throw new KOperationEngineException('Cannot copy PDF file [' . $this->inFilePath . '] to [' . $this->outFilePath . '] - [' . $error . ']');
} else {
// PDF input file copied as is to output file
return;
}
}
// renaming with unique name to allow conversion 2 conversions of same input file to be done together (PDF+SWF)
$tmpUniqInFilePath = dirname($inFilePath) . '/' . uniqid() . '_' . basename($inFilePath);
$realInFilePath = '';
$uniqueName = false;
if (@copy($inFilePath, $tmpUniqInFilePath)) {
$realInFilePath = realpath($tmpUniqInFilePath);
$uniqueName = true;
} else {
KalturaLog::notice('Could not rename input file [' . $inFilePath . '] with a unique name [' . $tmpUniqInFilePath . ']');
$realInFilePath = realpath($inFilePath);
}
parent::operate($operator, $realInFilePath, $configFilePath);
if ($uniqueName) {
@unlink($tmpUniqInFilePath);
}
//TODO: RENAME - will not be needed once PDFCreator can work with a configurations file
if ($inputExtension == 'pdf' && $this->flavorParamsOutput->readonly == true) {
$tmpFile = $this->outFilePath . '.pdf';
} else {
$tmpFile = kFile::replaceExt(basename($realInFilePath), 'pdf');
$tmpFile = dirname($this->outFilePath) . '/' . $tmpFile;
}
// sleeping while file not ready, since PDFCreator exists a bit before the file is actually ready
$sleepTimes = 50;
$sleepSeconds = 3;
while (!file_exists(realpath($tmpFile)) && $sleepTimes > 0) {
sleep($sleepSeconds);
$sleepTimes--;
clearstatcache();
}
if (!file_exists(realpath($tmpFile))) {
throw new kTemporaryException('Temp PDF Creator file not found [' . $tmpFile . '] output file [' . $this->outFilePath . ']');
} else {
KalturaLog::notice('document temp found [' . $tmpFile . '] output file [' . $this->outFilePath . ']');
}
//TODO: RENAME - will not be needed once PDFCreator can work with a configurations file
$tmpFile = realpath($tmpFile);
while (!rename($tmpFile, $this->outFilePath) && $sleepTimes > 0) {
sleep($sleepSeconds);
$sleepTimes--;
clearstatcache();
}
if (!file_exists($this->outFilePath)) {
$error = '';
if (function_exists('error_get_last')) {
$error = error_get_last();
}
throw new KOperationEngineException('Cannot rename file [' . $tmpFile . '] to [' . $this->outFilePath . '] - [' . $error . ']');
}
}
public function operate(kOperator $operator = null, $inFilePath, $configFilePath = null)
{
parent::operate($operator, $inFilePath, $configFilePath);
// KalturaLog::info("operator($operator), inFilePath($inFilePath), configFilePath($configFilePath)");
}
public function configure(KalturaConvartableJobData $data, KalturaBatchJob $job)
{
parent::configure($data, $job);
$errStr = null;
if (!KBatchBase::$taskConfig->params->InletArmadaUrl) {
$errStr = "InletArmadaUrl";
}
if (!KBatchBase::$taskConfig->params->InletArmadaLogin) {
if ($errStr) {
$errStr .= ",InletArmadaLogin";
} else {
$errStr = "InletArmadaLogin";
}
}
if (!KBatchBase::$taskConfig->params->InletArmadaPassword) {
if ($errStr) {
$errStr .= ",InletArmadaPassword";
} else {
$errStr = "InletArmadaPassword";
}
}
if ($errStr) {
throw new KOperationEngineException("Inlet failure: missing credentials - {$errStr}");
}
//, url(".$taskConfig->params->InletArmadaUrl."), login(."$taskConfig->params->InletArmadaLogin."),passw(".$taskConfig->params->InletArmadaPassword.")");
/*
$this->url = $taskConfig->params->InletArmadaUrl;
$this->login = $taskConfig->params->InletArmadaLogin;
$this->passw = $taskConfig->params->InletArmadaPassword;
if($taskConfig->params->InletArmadaPriority)
$this->prio = $taskConfig->params->InletArmadaPriority;
else
$this->prio = 5;
*/
}
public function configure(KSchedularTaskConfig $taskConfig, KalturaConvartableJobData $data)
{
parent::configure($taskConfig, $data);
KalturaLog::info("taskConfig-->" . print_r($taskConfig, true) . "\ndata->" . print_r($data, true));
}
protected function doOperation()
{
$this->validateFormat(self::PDF_FORMAT);
return parent::doOperation();
}
public function operate(kOperator $operator = null, $inFilePath, $configFilePath = null)
{
/*
* Creating unique output folder for nbrPlay/Webex sessions.
* This is required in order to support concurrent conversion sessions,
* because the nbrPlay tool generates temp files with the same name.
* Upon completion move the generated file into the 'regular' outFilePath
*/
$saveOutPath = $this->outFilePath;
$path_parts = pathinfo($this->outFilePath);
$outDir = realpath($path_parts['dirname']);
/*
* The temp folder name
*/
$tempFolder = "{$outDir}/" . $path_parts['basename'] . ".webex_temp_folder";
$tempOutPath = "{$tempFolder}/" . $path_parts['basename'];
if (!file_exists($tempFolder)) {
$oldUmask = umask(00);
$result = @mkdir($tempFolder, 0777, true);
umask($oldUmask);
}
/*
* Switch to temp forlder
*/
$this->outFilePath = $tempOutPath;
$rv = parent::operate($operator, $inFilePath, $configFilePath);
/*
* Restore the original
*/
if (file_exists($tempOutPath)) {
$outFilelist = kFile::dirList($tempFolder);
if (isset($outFilelist) && count($outFilelist) > 0) {
foreach ($outFilelist as $fileName) {
for ($tries = 0; $tries < 5; $tries++) {
$toFile = "{$outDir}/" . pathinfo($fileName, PATHINFO_BASENAME);
$rv = kFile::moveFile($fileName, $toFile);
if (!file_exists($fileName)) {
break;
}
KalturaLog::err("Failed to move ({$fileName}) to ({$toFile})");
Sleep(60);
}
}
Sleep(60);
rmdir($tempFolder);
}
}
$this->outFilePath = $saveOutPath;
return $rv;
}
protected function getCmdLine()
{
$cmdLine = parent::getCmdLine();
$cmdLine = KConversionEngineFfmpeg::expandForcedKeyframesParams($cmdLine);
return $cmdLine;
}
public function configure(KSchedularTaskConfig $taskConfig, KalturaConvartableJobData $data, KalturaClient $client)
{
parent::configure($taskConfig, $data, $client);
$this->taskConfig = $taskConfig;
$errStr = null;
if (!$taskConfig->params->InletArmadaUrl) {
$errStr = "InletArmadaUrl";
}
if (!$taskConfig->params->InletArmadaLogin) {
if ($errStr) {
$errStr .= ",InletArmadaLogin";
} else {
$errStr = "InletArmadaLogin";
}
}
if (!$taskConfig->params->InletArmadaPassword) {
if ($errStr) {
$errStr .= ",InletArmadaPassword";
} else {
$errStr = "InletArmadaPassword";
}
}
if ($errStr) {
throw new KOperationEngineException("Inlet failure: missing credentials - {$errStr}");
}
//, url(".$taskConfig->params->InletArmadaUrl."), login(."$taskConfig->params->InletArmadaLogin."),passw(".$taskConfig->params->InletArmadaPassword.")");
/*
$this->url = $taskConfig->params->InletArmadaUrl;
$this->login = $taskConfig->params->InletArmadaLogin;
$this->passw = $taskConfig->params->InletArmadaPassword;
if($taskConfig->params->InletArmadaPriority)
$this->prio = $taskConfig->params->InletArmadaPriority;
else
$this->prio = 5;
*/
KalturaLog::info("taskConfig-->" . print_r($taskConfig, true) . "\ndata->" . print_r($data, true));
}
protected function getCmdLine()
{
$exeCmd = parent::getCmdLine();
KalturaLog::info(print_r($this, true));
return $exeCmd;
}
public function configure(KSchedularTaskConfig $taskConfig, KalturaConvartableJobData $data, KalturaClient $client)
{
parent::configure($taskConfig, $data, $client);
$this->data = $data;
$this->client = $client;
}
public function operate(kOperator $operator = null, $inFilePath, $configFilePath = null)
{
KalturaLog::debug("document : operator [" . print_r($operator, true) . "] inFilePath [{$inFilePath}]");
if ($configFilePath) {
$configFilePath = realpath($configFilePath);
}
// bypassing PDF Creator for source PDF files
$inputExtension = strtolower(pathinfo($inFilePath, PATHINFO_EXTENSION));
if ($inputExtension == 'pdf' && !$this->flavorParamsOutput->readonly) {
KalturaLog::notice('Bypassing PDF Creator for source PDF files');
if (!@copy($inFilePath, $this->outFilePath)) {
$error = '';
if (function_exists('error_get_last')) {
$error = error_get_last();
}
throw new KOperationEngineException('Cannot copy PDF file [' . $this->inFilePath . '] to [' . $this->outFilePath . '] - [' . $error . ']');
} else {
// PDF input file copied as is to output file
return;
}
}
// renaming with unique name to allow conversion 2 conversions of same input file to be done together (PDF+SWF)
$tmpUniqInFilePath = dirname($inFilePath) . '/' . uniqid() . '_' . basename($inFilePath);
$realInFilePath = '';
$uniqueName = false;
if (@copy($inFilePath, $tmpUniqInFilePath)) {
$realInFilePath = realpath($tmpUniqInFilePath);
$uniqueName = true;
} else {
KalturaLog::notice('Could not rename input file [' . $inFilePath . '] with a unique name [' . $tmpUniqInFilePath . ']');
$realInFilePath = realpath($inFilePath);
}
$filePrefix = file_get_contents($realInFilePath, false, null, 0, strlen(self::OLD_OFFICE_SIGNATURE));
$path_info = pathinfo($realInFilePath);
$ext = $path_info['extension'];
$newOfficeExtensions = array('pptx', 'docx', 'xlsx');
$ext = strtolower($ext);
//checks if $realInFilePath is an old office document with a new extension ('pptx|docx|xlsx')
//if $realInFilePath is not the fileSync itself ($uniqueName = true) , rename the file by removing the 'x' from the extension.
if ($uniqueName && in_array($ext, $newOfficeExtensions) && $filePrefix == self::OLD_OFFICE_SIGNATURE) {
$RealInFilePathWithoutX = substr($realInFilePath, 0, -1);
if (rename($realInFilePath, $RealInFilePathWithoutX)) {
KalturaLog::notice("renamed file [{$realInFilePath}] to [{$RealInFilePathWithoutX}]");
$realInFilePath = $RealInFilePathWithoutX;
}
}
$finalOutputPath = $this->outFilePath;
if ($inputExtension == 'pdf' && $this->flavorParamsOutput->readonly == true) {
$tmpFile = $this->outFilePath . '.pdf';
} else {
$tmpFile = kFile::replaceExt(basename($realInFilePath), 'pdf');
$tmpFile = dirname($this->outFilePath) . '/' . $tmpFile;
}
$this->outFilePath = $tmpFile;
parent::operate($operator, $realInFilePath, $configFilePath);
$this->outFilePath = $finalOutputPath;
if ($uniqueName) {
@unlink($tmpUniqInFilePath);
}
$sleepTimes = $this->taskConfiguration->fileExistReties;
if (!$sleepTimes) {
$sleepTimes = self::DEFAULT_SLEEP_TIMES;
}
$sleepSeconds = $this->taskConfiguration->fileExistInterval;
if (!$sleepSeconds) {
$sleepSeconds = self::DEFAULT_SLEEP_SECONDS;
}
// sleeping while file not ready, since PDFCreator exists a bit before the file is actually ready
while (!file_exists(realpath($tmpFile)) && $sleepTimes > 0) {
sleep($sleepSeconds);
$sleepTimes--;
clearstatcache();
}
if (!file_exists(realpath($tmpFile))) {
throw new kTemporaryException('Temp PDF Creator file not found [' . $tmpFile . '] output file [' . $this->outFilePath . ']');
} else {
KalturaLog::notice('document temp found [' . $tmpFile . '] output file [' . $this->outFilePath . ']');
}
$fileUnlockRetries = $this->taskConfiguration->params->fileUnlockRetries;
if (!$fileUnlockRetries) {
$fileUnlockRetries = self::DEFAULT_FILE_UNLOCK_RETRIES;
}
$fileUnlockInterval = $this->taskConfiguration->params->fileUnlockInterval;
if (!$fileUnlockInterval) {
$fileUnlockInterval = self::DEFAULT_FILE_UNLOCK_INTERVAL;
}
$tmpFile = realpath($tmpFile);
while (!rename($tmpFile, $this->outFilePath) && $fileUnlockRetries > 0) {
sleep($fileUnlockInterval);
$fileUnlockRetries--;
clearstatcache();
}
if (!file_exists($this->outFilePath)) {
$error = '';
if (function_exists('error_get_last')) {
$error = error_get_last();
}
throw new KOperationEngineException('Cannot rename file [' . $tmpFile . '] to [' . $this->outFilePath . '] - [' . $error . ']');
}
}
public function __construct($cmd, $outFilePath)
{
parent::__construct($cmd, $outFilePath);
}
