public function getSerial()
{
if (!isset(self::$_serial)) {
$this->displayDebug('Création de l\'interface série sur le port : ' . $this->getConfiguration('port'));
$serial = new phpSerial();
$serial->deviceSet($this->getConfiguration('port'));
$serial->confBaudRate(9600);
$serial->confParity('none');
$serial->confStopBits(1);
$serial->confCharacterLength(8);
$serial->confFlowControl('none');
$serial->sendParameters("-ignbrk -hupcl -onlcr -echo -echok -echoctl -echoke");
$serial->setValidOutputs(array('OK', 'ERROR', '+CPIN: SIM PIN', '+CPIN: READY', '>', 'COMMAND NOT SUPPORT', '+CMS ERROR: 305'));
self::$_serial = $serial;
$this->cleanDevice();
}
return self::$_serial;
}
function MySensorMasterCom($device)
{
$serial = new phpSerial();
$serial->deviceSet($device);
$serial->confBaudRate(115200);
$serial->confCharacterLength(8);
$serial->confParity("none");
$serial->confStopBits(1);
$serial->confFlowControl("none");
$this->Serial = $serial;
}
function sendCommand($n)
{
$serial = new phpSerial();
$serial->deviceSet("/dev/ttyUSB0");
$serial->confBaudRate(9600);
$serial->confParity("none");
$serial->confCharacterLength(8);
$serial->confStopBits(1);
$serial->confFlowControl("none");
$serial->deviceOpen();
$serial->sendMessage($n);
// $read = $serial->readPort();
$serial->deviceClose();
}
function init()
{
$this->port = $serial = new phpSerial();
$p = DylosReaderConf::$serialPort;
$this->log("Opening {$p}");
$serial->deviceSet($p);
$serial->confBaudRate(9600);
$serial->confParity("none");
$serial->confCharacterLength(8);
$serial->confStopBits(1);
$serial->confFlowControl("none");
// Then we need to open it
$serial->deviceOpen();
}
function setupSerial($device)
{
$serial = new phpSerial();
$serial->deviceSet($device);
$serial->confBaudRate(9600);
//Baud rate: 9600
$serial->confParity("none");
//Parity (this is the "N" in "8-N-1")
$serial->confCharacterLength(8);
//Character length (this is the "8" in "8-N-1")
$serial->confStopBits(1);
//Stop bits (this is the "1" in "8-N-1")
$serial->confFlowControl("none");
$serial->deviceOpen();
return $serial;
}
<?php
include "php_serial.class.php";
// Let's start the class
$serial = new phpSerial();
// First we must specify the device. This works on both linux and windows (if
// your linux serial device is /dev/ttyS0 for COM1, etc)
$serial->deviceSet("COM2");
// Then we need to open it
$serial->deviceOpen();
// To write into
$serial->sendMessage("Hello !");
// Or to read from
//$read = $serial->readPort();
// If you want to change the configuration, the device must be closed
$serial->deviceClose();
// We can change the baud rate
$serial->confBaudRate(9600);
// etc...
<?php
include "php_serial.class.php";
// Let's start the class
$serial = new phpSerial();
// First we must specify the device. This works on both linux and windows (if
// your linux serial device is /dev/ttyS0 for COM1, etc)
$serial->deviceSet("COM1");
// Then we need to open it
$serial->deviceOpen();
// To write into
$serial->sendMessage("Hello !");
// Or to read from
$read = $serial->readPort();
// If you want to change the configuration, the device must be closed
$serial->deviceClose();
// We can change the baud rate
$serial->confBaudRate(2400);
// etc...
file_put_contents($logfilename, $newLog, FILE_APPEND);
echo $logEvent;
}
//
// main
//
// $device = '/dev/ttyUSB0';
// $write = 'w+';
// sleep(3);
//
// $handle = fopen( $device, $write ); # Write +
include "php_serial.class.php";
$serial = new phpSerial();
#$serial->deviceSet("/dev/ttyACM0");
$serial->deviceSet("/dev/ttyUSB0");
$serial->confBaudRate("9600");
$serial->confParity("none");
$serial->confCharacterLength(8);
$serial->confFlowControl("none");
$serial->confStopBits(2);
$serial->deviceOpen();
sleep(3);
// Or to read from
$strAllLog = "";
while (true) {
// $strLog = fgets( $handle ); # Read data from device
$strLog = $serial->readPort();
//echo $strLog;
if ($strLog != "") {
$strAllLog .= $strLog;
sleep(5);
<?php
include "php_serial.class.php";
include "common.php";
$command = "";
$cmd = $_GET["cmd"];
if ($cmd != "" && array_key_exists($cmd, $gCommands)) {
$command = $gCommands[$cmd];
} else {
echo "error";
return;
}
$serial = new phpSerial();
$serial->deviceSet("/dev/ttyACM0");
$serial->confBaudRate(115200);
$serial->confParity("none");
$serial->confCharacterLength(8);
$serial->confStopBits(1);
$serial->confFlowControl("none");
$serial->deviceOpen();
sleep(1);
for ($i = 0; $i < strlen($command); $i++) {
$serial->sendMessage($command[$i]);
}
$serial->deviceClose();
header('Refresh: 1; URL=/');
echo "Done " . $command;
// <input type="file" name="dat2"/>
// <input type="submit" name="file" value="Odpri"/>
// </form>';
// First we must specify the device. This works on both linux and windows (if
// your linux serial device is /dev/ttyS0 for COM1, etc)
//Z klikom na gumb "Odpri" odpremo COM port na določenih vratih z določeno "baud rate"
//TO-DO dodaj še ostale parametre kot so: stop bit, pariteto itd...
if ($_SERVER['REQUEST_METHOD'] === 'POST') {
if ($_POST['comm'] == 'None') {
echo 'There\'s no active comm-port that can be used. Please check the connection<br />
(Right Click on My Computer->Select Properties->Hardware->Device Manager->Ports (COM & LPT))<br />
If there is a comm-port is active, make sure that it is not being used';
} else {
if (isset($_POST['comm'])) {
$serial->deviceSet($_POST['comm']);
$serial->confBaudRate($_POST['baud']);
$serial->confParity("none");
$serial->confCharacterLength(7);
$serial->confStopBits(1);
$serial->confFlowControl("none");
// Then we need to open it
$serial->deviceOpen();
$odprto = true;
$podatki;
$cas = time();
$minute = $cas + 1.5 * 60;
$time = date('m-d-Y H:i:s', $cas);
$finish_time = date('m-d-Y H:i:s', $minute);
$tmp;
$f = fopen("textfile.txt", "w", "a") or die("Unable to open file!");
while ($time < $finish_time) {
$argv = $_SERVER["argv"];
//$argv is an array
if ($argc == 0) {
error(usage());
}
$args = parse_args($argc, $argv);
if (isset($args['d'])) {
$debug = $args['d'];
} elseif (isset($args['debug'])) {
$debug = $args['debug'];
} else {
$debug = 0;
}
$dmx = new phpSerial();
$dmx->deviceSet(DMX_DEV);
$dmx->confBaudRate(SERIAL_BAUD);
if (!$dmx->deviceOpen()) {
die("Could not open DMX Interface on " . DMX_DEV . "\n");
}
$f = 0;
if ($sn = dmx_request_serial_number()) {
printf("Found DMX Interface with Serial Number: %s\n", $sn);
if ($fw = dmx_request_parameters()) {
printf("Firmware Version: %s\n", $fw['FW_VER']);
printf("DMX Output Break Time: %s x 10.67 = %.02f us\n", $fw['DMX_BR_TIME'], $fw['DMX_BR_TIME'] * 10.67);
printf("DMX Mark After Break Time: %s x 10.67 = %.02f us\n", $fw['DMX_MABR_TIME'], $fw['DMX_MABR_TIME'] * 10.67);
printf("DMX Output Rate: %s packets/sec\n", $fw['DMX_OUTPUT_RATE']);
}
$f = 1;
}
if (!$f) {
}
}
if (!$SWITCHER_FOUND) {
logEntry("switcher command not found: exiting");
exit(0);
}
$cmd = explode(",", $SWITCHER_CMD);
//print_r($cmd);
$i = 0;
for ($i = 0; $i <= count($cmd); $i++) {
$switcher_cmd .= chr($cmd[$i]);
}
$SWITCHER_CMD = $switcher_cmd;
logEntry("-------");
logEntry("Sending command");
logEntry("Switcher cmd: " . $SWITCHER_CMD);
logEntry("Sending SERIAL COMMAND");
logEntry("SERIAL DEVICE: " . $SERIAL_DEVICE);
$serial = new phpSerial();
$serial->deviceSet($SERIAL_DEVICE);
$serial->confBaudRate($SWITCHER_BAUD);
$serial->confParity($SWITCHER_PARITY);
// $serial->confFlowControl("none");
$serial->confCharacterLength($SWITCHER_CHAR_BITS);
$serial->confStopBits($SWITCHER_STOP_BITS);
$serial->deviceOpen();
$serial->sendMessage($SWITCHER_CMD);
sleep(1);
logEntry("RETURN DATA: " . hex_dump($serial->readPort()));
logEntry("RETURN DATA: " . $serial->readPort());
$serial->deviceClose();
#!/usr/bin/php
<?php
include "lib/php_serial.class.php";
$s = new phpSerial();
$s->deviceSet("/dev/ttyUSB0");
$s->confBaudRate(9600);
$s->deviceOpen();
$s->sendMessage("Hello!");
$r = $s->readPort();
print $r;
$s->deviceClose();
$feed = 1000;
$raspi_still = false;
if ($_SERVER['REQUEST_METHOD'] == 'POST') {
include "php_serial.class.php";
$value = isset($_POST['c']) && $_POST['c'] != '' ? $_POST['c'] : '';
$feed = isset($_POST['feed']) && $_POST['feed'] != '' ? $_POST['feed'] : $feed;
if ($value != '') {
if ($value == 'mdi') {
$value = isset($_POST['mdi-code']) && $_POST['mdi-code'] != '' ? strtoupper($_POST['mdi-code']) : '';
}
if (strpos($value, 'G0') !== false) {
$value .= ' F' . $feed;
}
$serial = new phpSerial();
$serial->deviceSet(PORT_NAME);
$serial->confBaudRate(BOUD_RATE);
$serial->confParity("none");
$serial->confCharacterLength(8);
$serial->confStopBits(1);
$serial->deviceOpen();
$serial->sendMessage($value . "\r\n");
$reply = $serial->readPort();
$serial->deviceClose();
}
if (isset($_POST['s']) && $_POST['s'] == 1) {
$raspi_still = true;
exec('sudo raspistill -hf -w 512 -h 320 -o /var/www/temp/picture.jpg -t 1');
$filename = "/var/www/temp/picture.jpg";
$handle = fopen($filename, "rb");
$contents = fread($handle, filesize($filename));
fclose($handle);
function getSerialConnection()
{
static $serial = null;
if (!$serial) {
print "Opening serial connection .. ";
$serial = new phpSerial();
if ($serial->deviceSet('/dev/ttyACM0')) {
$serial->confBaudRate(9600);
$serial->deviceOpen();
} else {
print "ERROR\n";
exit(1);
}
print "OK\n";
}
return $serial;
}