public function Exec($command)
{
$engine = $this->session->getSpooler();
if (!isset($engine[0]['shell'])) {
print "?!";
exit;
}
$shell = $engine[0]['shell'];
$host = $shell['host'];
$user = $shell['user'];
$password = $shell['password'];
$method = 'CURL';
set_include_path(get_include_path() . PATH_SEPARATOR . '../vendor/phpseclib');
include 'Net/SSH2.php';
include 'Crypt/RSA.php';
$ssh = new \Net_SSH2($host);
if (1) {
$key = new \Crypt_RSA();
$ret = $key->loadKey("-----BEGIN RSA PRIVATE KEY-----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\n3wUYsjeDxqq8Km93+iMQ8DDNZIvoVcfYQW9BfDlf\n-----END RSA PRIVATE KEY----- ");
if (!$ret) {
echo "loadKey failed\n";
print "<pre>" . $ssh->getLog() . '</pre>';
exit;
}
} elseif (isset($shell['password'])) {
$key = $shell['password'];
} else {
$key = '';
// ?! possible ?
}
if (!$ssh->login($user, $key)) {
exit("Login Failed ({$user})");
}
return $ssh->exec("system '{$command}'");
}
/**
* Logs in to a SSH server with the specified credentials,
* and returns the Net_SSH2 instance.
*
* @return Net_SSH2 $ssh
* @author Ronald Rey
**/
public static final function getSSH($host, $user, $pass, $timeout)
{
$ssh = new Net_SSH2($host);
if (!$ssh->login($user, $pass)) {
exit('Login to failed.');
}
$ssh->setTimeout($timeout);
$ssh->write(" ");
return $ssh;
}
public function Exec($shell, $command, $stdin = '')
{
$host = $shell['host'];
$user = $shell['user'];
$ssh = new \Net_SSH2($host);
if (isset($shell['key'])) {
$key = new \Crypt_RSA();
$ret = $key->loadKey($shell['key']);
if (!$ret) {
$this->status = '!KEY';
echo "loadKey failed\n";
print "<pre>" . $ssh->getLog() . '</pre>';
return;
}
} elseif (isset($shell['password'])) {
$key = $shell['password'];
} else {
$key = '';
// ?! possible ?
}
if (!@$ssh->login($shell['user'], $key)) {
$this->status = '!LOGIN';
print 'Login Failed: ' . $shell['user'];
print "<pre>" . $ssh->getLog() . '</pre>';
return;
}
$this->status = 'RUNNING';
if ($stdin == '') {
return $ssh->exec("{$command}");
}
return;
}
function getPing($sourceIP, $destinationIP)
{
// This will work with any pfSense install. $sourceIP is the IP address of the WAN that you want to
// use to ping with. This allows you to ping the same address from multiple WANs if you need to.
global $local_pfsense_ip;
global $pfSense_username;
global $pfSense_password;
$ssh = new Net_SSH2($local_pfsense_ip);
if (!$ssh->login($pfSense_username, $pfSense_password)) {
//exit('Login Failed');
return array(0, 0);
}
$terminal_output = $ssh->exec('ping -c 5 -q -S ' . $sourceIP . ' ' . $destinationIP);
// If using something besides OS X you might want to customize the following variables for proper output of average ping.
$findme_start = '= ';
$start = strpos($terminal_output, $findme_start);
$ping_return_value_str = substr($terminal_output, $start + 2, 100);
$findme_stop1 = '.';
$stop = strpos($ping_return_value_str, $findme_stop1);
$findme_avgPing_decimal = '.';
$avgPing_decimal = strpos($ping_return_value_str, $findme_avgPing_decimal, 6);
$findme_forward_slash = '/';
$avgPing_forward_slash = strpos($ping_return_value_str, $findme_forward_slash);
$avgPing = substr($ping_return_value_str, $stop + 5, $avgPing_decimal - $avgPing_forward_slash - 1);
return $avgPing;
}
public function Exec($host, $user, $password, $command)
{
$ssh = new Net_SSH2($host);
if (!$ssh->login($user, $password)) {
exit('Login Failed');
}
echo $ssh->exec("system '{$command}'");
}
function delete_user($username, $server_host, $server_username, $server_password)
{
$ssh = new Net_SSH2($server_host);
if ($ssh->login($server_username, $server_password) == false) {
exit('Login Failed');
}
$command = 'userdel -r ' . $username;
echo $ssh->exec($command);
}
function ConectSSHStation($server)
{
$ssh = new Net_SSH2($server);
if (!$ssh->login(userubnt, passubnt)) {
print "Login Failed {$server}";
}
$mca = $ssh->exec("mca-status");
return $mca;
}
public function Exec($command)
{
set_include_path(get_include_path() . PATH_SEPARATOR . '../vendor/phpseclib');
include 'Net/SSH2.php';
$ssh = new \Net_SSH2($this->host);
if (!$ssh->login($this->user, $this->password)) {
exit('Login Failed');
}
return $ssh->exec("system '{$command}'");
}
public function connectToServer()
{
include Mage::getBaseDir('base') . DS . 'lib' . DS . 'Ssh' . DS . 'Net' . DS . 'SSH2.php';
$ssh = new Net_SSH2($this->getMacServerIp());
if ($ssh->login($this->getMacServerUser(), $this->getMacServerPassword())) {
return $ssh;
} else {
return false;
}
}
function runcmd($cmd)
{
include 'Net/SSH2.php';
$ssh = new Net_SSH2('localhost');
if (!$ssh->login('rc', 'cacapedo')) {
exit('Login Failed');
}
// echo $ssh->exec('pwd');
$r = $ssh->exec($cmd);
return str_replace("\n", "<br>", $r);
}
/**
* connect to the remote server
* @return bool|\Net_SSH2
*/
private function connect()
{
$ssh = new \Net_SSH2(Setting::getSetting('remote:host'));
$key = new Crypt_RSA();
$key->loadKey(file_get_contents(Setting::getSetting('ssh:priv_key')));
if (!$ssh->login(Setting::getSetting('remote:user'), $key)) {
$cli = new CLImate();
$cli->error("Could not connect to server");
return false;
}
return $ssh;
}
public static function localhost_connect()
{
global $cphp_config;
$sSSH = new Net_SSH2('127.0.0.1');
$sKey = new Crypt_RSA();
$sKey->loadKey(file_get_contents($cphp_config->settings->rootkey));
if ($sSSH->login("root", $sKey)) {
return $sSSH;
} else {
return $sErrors = array("Could not connect to the local host.");
}
}
/**
* Establish a SSH2 connection using PHPSECLIB
*
* @return object (ssh obj) OR string (err)
*/
function newNetSSH2($ip, $sshport = 22, $login, $password)
{
$ssh = new Net_SSH2($ip, $sshport);
if (!$ssh->login($login, $password)) {
$socket = @fsockopen($ip, $sshport, $errno, $errstr, 5);
if ($socket == FALSE) {
$debug = "Unable to connect to {$ip} on port {$sshport} : {$errstr} ( Errno: {$errno} )";
return $debug;
}
return 'Unable to connect to box with SSH';
}
return $ssh;
}
/** IS USED TO CONNECT TO SSH
INCLUDE THIS BEFORE FUNCTION CALL
* set_include_path(get_include_path() . PATH_SEPARATOR . ROOT_DIRECTORY_PATH . 'phpseclib');
include_once('Net/SSH2.php');
include_once('Crypt/RSA.php');
EXAMPLE AT addEc2Request.php
@return empty sting if thigs goes wrong.
*/
function connect_to_ssh($publicDnsName, $keyPairName)
{
$ssh = new Net_SSH2($publicDnsName);
$key = new Crypt_RSA();
$key->loadKey(file_get_contents(ROOT_DIRECTORY_PATH . AMAZON_SSH_KEYS . $keyPairName));
if (!$ssh->login('ubuntu', $key)) {
//WHEN USER IS NOT LOGGED INTO SSH
return 2;
} else {
//if things goes right.
return array('Net_SSH2' => $ssh, 'Crypt_RSA' => $key);
}
}
/**
* Execute task and return report info
*
* @return \Deployer\Task
*/
public function execute()
{
foreach ($this->params() as $param => $value) {
$this->_params[$param] = \Deployer::applyGlobalParams($value);
}
$ssh = new \Net_SSH2($this->param('host'), $this->param('port'));
if (!$ssh->login($this->param('username'), $this->param('password'))) {
throw new \Deployer\TaskException('Can\'t connect to remote host');
}
$scp = new \Net_SCP($ssh);
$scp->put($this->param('dest'), file_get_contents($this->param('file')));
$info = sprintf('Filesize: %d bytes', filesize($this->param('file')));
return $this->info($info);
}
function set_addr($subnet, $interface)
{
$interface = $interface != '' ? $interface : $GLOBALS['ethernet_forenaming_scheme'] . '1';
$ip = explode('/', $subnet);
$cidr = $ip[1];
$ip_parts = explode('.', $ip[0]);
$ip_parts[3] = $ip_parts[3] + 1;
$gw = implode('.', $ip_parts);
$ip_parts[3] = $ip_parts[3] + 1;
$ip = implode('.', $ip_parts);
$ssh = new Net_SSH2('192.168.88.1');
if ($ssh->login('admin', $GLOBALS['admin_password'])) {
//while we're here we might as well reset the mac addresses again.
$detail = $ssh->exec('int eth print');
if (preg_match_all("/{$GLOBALS['ethernet_forenaming_scheme']}/", $detail, $matches)) {
$i = 1;
foreach ($matches[0] as $match) {
$ssh->exec('int ethernet reset-mac-address ' . $GLOBALS['ethernet_forenaming_scheme'] . $i);
$ssh->exec(':beep frequency=120 length=2ms;');
$i++;
if ($i == '10') {
$ssh->exec('int ethernet reset-mac-address ' . $GLOBALS['sfp_forenaming_scheme'] . '1');
}
}
}
$ssh->exec('ip address add address=' . $ip . '/' . $cidr . ' interface=' . $interface);
//set the ip on the specified interface.
$ssh->exec('ip route add dst-address=0.0.0.0/0 gateway=' . $gw);
//add the default route
}
}
function connect()
{
try {
$ssh = new \Net_SSH2($this['addr'], $this['ssh_port'] ?: 22);
$key = $this->getPrivateKey();
if (!$ssh->login($this['ssh_user'] ?: 'dokku', $key)) {
throw $this->exception('Login Failed!');
}
return $ssh;
} catch (BaseException $e) {
throw $e;
// don't do anything yet
// var_dump($e);
}
}
public function runCommand($cmd)
{
if (!empty($this->key_path)) {
$key = new Crypt_RSA();
$key->loadKey(file_get_contents($this->key_path));
}
$ssh = new Net_SSH2($this->host, $this->port);
if ($key) {
$ssh->login($this->user, $key);
} else {
$ssh->login($this->user, $this->password);
}
$out = $ssh->exec($cmd);
return $out;
}
public static function server_connect($sServer, $sAPI = 0)
{
$sSSH = new Net_SSH2($sServer->sIPAddress);
if ($sServer->sPassword == 0) {
$sKey = new Crypt_RSA();
$sKey->loadKey(file_get_contents('/var/feathur/data/keys/' . $sServer->sKey));
} else {
$sKey = file_get_contents('/var/feathur/data/keys' . $sServer->sKey);
}
try {
if (!$sSSH->login($sServer->sUser, $sKey)) {
if (!empty($sAPI)) {
return $sResult = array("result" => 'Unable to connect to the host node, please contact customer service.');
}
echo json_encode(array("result" => 'Unable to connect to the host node, please contact customer service.'));
die;
} else {
$sSSH->setTimeout(30);
return $sSSH;
}
} catch (Exception $e) {
if (!empty($sAPI)) {
return $sResult = array("result" => 'Unable to connect to the host node, please contact customer service.');
}
echo json_encode(array("result" => 'Unable to connect to the host node, please contact customer service.'));
die;
}
}
protected function setUp()
{
if (!file_exists('config.php')) {
$this->markTestSkipped("Can't run test without setting up a local configution! See config.dist.php");
}
include 'config.php';
include_once 'Net/SSH2.php';
$this->client = Net_SSH2::factory('LibSSH2', $options['libssh2']);
}
/**
* Execute task and return report info
*
* @return \Deployer\Task
*/
public function execute()
{
$info = '';
foreach ($this->params() as $param => $value) {
$this->_params[$param] = \Deployer::applyGlobalParams($value);
}
$ssh = new \Net_SSH2($this->param('host'), $this->param('port'));
if (!$ssh->login($this->param('username'), $this->param('password'))) {
throw new \Deployer\TaskException('Can\'t connect to remote host');
}
foreach ((array) $this->param('cmd') as $cmd) {
$command = 'cd ' . $this->param('directory') . ' && ' . $cmd;
$command = \Deployer::applyGlobalParams($command);
$result = $ssh->exec($command);
$info .= '$ ' . $command . PHP_EOL . $result . PHP_EOL;
}
return $this->info($info);
}
function get_json_info_from_server($ip_address, $username, $password, $start_date, $end_date = null)
{
global $path_to_logfile_rollup;
$ssh = new Net_SSH2($ip_address);
if (!$ssh->login($username, $password)) {
exit('Login Failed');
}
$command = 'php ' . $path_to_logfile_rollup . 'logfile_rollup.php ' . $start_date;
if ($end_date !== null) {
$command .= ' ' . $end_date;
}
$json_response = null;
try {
$json_response = $ssh->exec($command);
} catch (Exception $e) {
die($e->getMessage());
}
return $json_response;
}
function ssh_connect($host)
{
dbg_log("Connecting over SSH to {$host}");
#define('NET_SSH2_LOGGING', NET_SSH2_LOG_COMPLEX);
$ssh = new Net_SSH2($host);
$key = new Crypt_RSA();
$key->setPassword(get_config()->host_ssh_private_key_password);
$keyPath = get_config()->host_ssh_private_key;
$keyString = file_get_contents($keyPath);
$userString = get_config()->host_ssh_username;
if (!$key->loadKey($keyString)) {
dbg_log(var_dump($ssh->getErrors(), true));
exit("cannot import key {$keyPath}");
}
if (!$ssh->login($userString, $key)) {
dbg_log($ssh->getLastError());
exit('Login Failed');
}
return $ssh;
}
public function execute($com = false)
{
if ($com == false) {
die("Epic Fail! Yes, it was epic");
}
$oldPath = set_include_path("/home/sites/berrics.dev/sharedVendors/phpseclib");
App::import("Vendor", "SSH2", array("file" => "phpseclib/Net/SSH2.php"));
set_include_path($oldPath);
$ssh = new Net_SSH2('10.181.67.27');
$login = $ssh->login('root', 'WEB1MH0r5t7Wn');
$out = '';
switch ($com) {
case "sync-berrics-all":
$out .= $ssh->exec("/home/sites/berrics.shell/sync-berrics-all");
$out .= $ssh->exec("/home/sites/berrics.shell/clear-cache");
break;
case "sync-berrics-all-check":
$out .= $ssh->exec("/home/sites/berrics.shell/sync-berrics-all-check");
break;
case "sync-berrics-splash":
$out .= $ssh->exec("/home/sites/berrics.shell/sync-berrics-splash");
break;
default:
$out .= "Nothing to do...";
break;
}
$this->set(compact("out"));
//echo $ssh->exec('/home/sites/berrics.shell/sync-berrics-all-check');
}
/**
* ???
*
* @param string[][] $data Die Serverdaten
* @return ???
*/
public static function Verbinden($data)
{
$ssh = null;
if ($data['ZV']['zv_ssh_auth_type'] == 'passwd') {
$ssh = new Net_SSH2($data['ZV']['zv_ssh_address']);
$res = @$ssh->login($data['ZV']['zv_ssh_login'], $data['ZV']['zv_ssh_password']);
if (!$res) {
return null;
}
$ssh->setTimeout(0);
} else {
if ($data['ZV']['zv_ssh_auth_type'] == 'keyFile') {
$ssh = new Net_SSH2($data['ZV']['zv_ssh_address']);
$key = new Crypt_RSA();
$key->loadKey(file_get_contents($data['ZV']['zv_ssh_key_file']));
if (!$ssh->login($data['ZV']['zv_ssh_login'], $key)) {
return null;
}
$ssh->setTimeout(0);
}
}
return $ssh;
}
function getInfo($ip, $sshkey_location)
{
$ssh = new Net_SSH2($ip);
//key
$key = new Crypt_RSA();
$key->loadKey(file_get_contents($sshkey_location));
if (!$ssh->login('root', $key)) {
die("SSH Login Failed!");
} else {
$return['disk_usage'] = $ssh->exec("df -k .|awk 'NR==2 {print \$5}'");
$return['disk_remaining'] = 100 - substr($return['disk_usage'], 0, -1) . "%";
$uptime = $ssh->exec('echo `uptime`');
list($uptime, $load) = explode('load average:', $uptime);
list($trash, $uptime) = explode(' up ', $uptime);
list($uptime, $trash) = explode(', ', $uptime);
$return['uptime'] = $uptime;
$return['load'] = $load;
//get memory
$return['memory_free'] = $ssh->exec("cat /proc/meminfo|grep 'MemFree'");
list($trash, $return['memory_free']) = explode('MemFree:', $return['memory_free']);
}
return $return;
}
private function doRunTests($testSuite, array $arguments)
{
$arguments = implode(' ', $arguments);
$this->ssh->exec("ps -ef | grep \"php console tests:run\" | grep -v grep | awk '{print \$2}' | xargs kill -9");
if ('all' === $testSuite) {
$this->ssh->exec('php console tests:run --options="--colors" ' . $arguments);
} elseif ('ui' === $testSuite) {
$this->ssh->exec('php console tests:run-ui --persist-fixture-data --assume-artifacts ' . $arguments);
} else {
$this->ssh->exec('php console tests:run --options="--colors" --testsuite="unit" ' . $arguments);
$this->ssh->exec('php console tests:run --options="--colors" --testsuite="' . $testSuite . '" ' . $arguments);
}
if ('system' === $testSuite) {
$this->ssh->exec("tar -cjf tests/PHPUnit/System/processed/processed.tar.bz2 tests/PHPUnit/System/processed/ plugins/*/tests/System/processed/ --exclude='.gitkeep' --exclude='tests/PHPUnit/System/processed/processed.tar.bz2'");
}
}
/**
* Disconnect
*
* @param Integer $reason
* @return Boolean
* @access private
*/
function _disconnect($reason)
{
$this->pwd = false;
parent::_disconnect($reason);
}
<html>
<head><title>Bandit</title></head>
<body>
<?php
set_include_path(get_include_path() . PATH_SEPARATOR . 'c:\\wamp\\www\\bandit\\phpseclib');
include 'phpseclib\\Net\\SSH2.php';
$ssh = new Net_SSH2('bandit1.labs.overthewire.org');
if (!$ssh->login('bandit1', 'boJ9jbbUNNfktd78OOpsqOltutMc3MY1')) {
exit('Login Failed');
} else {
echo "<b>CONECTADO!</b> <p>";
}
echo "Bandit2 Pass Walkthrough<p>\n\t++ ls -la (to see all files)<br>\n\t++ cat ./- (special character filename)<p>";
echo "<h1>" . $ssh->exec('cat ./-') . "</h1>";
echo $ssh->exec('exit');
?>
</body>
</html>
<?php
$output = shell_exec('sh PATCH_SUPEE-6788_CE_1.9.1.0_v1-2015-10-27-09-06-11.sh');
echo "<pre>{$output}</pre>";
exit;
include 'Crypt/RSA.php';
include 'Net/SSH2.php';
try {
$key = new Crypt_RSA();
//$key->setPassword('whatever');
$key->loadKey(file_get_contents('id_rsa.ppk'));
$ssh = new Net_SSH2('ftp.narayansoft.com');
if (!$ssh->login('username', $key)) {
exit('Login Failed');
}
} catch (Exception $e) {
echo 'Caught exception: ', $e->getMessage(), "\n";
}
exit;
echo $ssh->read('username@username:~$');
$ssh->write("ls -la\n");
echo $ssh->read('username@username:~$');