Exemple #1
0
 public static function give($to, $amt)
 {
     $ramt = $amt;
     $rem = mine::countcoins($coins);
     if ($rem < $amt) {
         gio::output("Not enough coins");
         return false;
     }
     $paths = Tools::address($to);
     if (!$paths) {
         gio::output("The destination account is invalid");
         return false;
     }
     $getcoins = array();
     $c = 1;
     if (!is_array($coins)) {
         return false;
     }
     $vals = array_keys($coins);
     rsort($vals);
     foreach ($vals as $val) {
         if ($amt < $val) {
             continue;
         }
         if ($amt <= 0) {
             break;
         }
         $ch[$val] = floor($amt / $val);
         if ($ch[$val] > count($coins[$val])) {
             $ch[$val] = count($coins[$val]);
         }
         $amt -= $ch[$val] * $val;
     }
     foreach ($ch as $v => $n) {
         while ($n > 0 && (list($id, $coin) = each($coins[$v]))) {
             $getcoins[$id] = $coin;
             unset($coins[$v][$id]);
             $n--;
         }
     }
     foreach ($getcoins as $k => $v) {
         $secret[$k] = Tools::makesecrets();
         $getcoins[$k]['secret'] = GsonCrypt::seal($secret[$k], $paths['srakey']);
     }
     $net = new Gnet();
     if (!$net->connect($paths['address'], intval($paths['port']))) {
         gio::output("Unable to connect to the destination account");
         return false;
     } else {
         $m = Gmsg::create(Gmsg::prepare($getcoins, "deposit", $paths['account']));
         $m = GsonCrypt::seal($m, $paths['bank']);
         if (!$m) {
             gio::output("Unable to send!");
             gio::output("POSSIBLE CAUSES:");
             gio::output("The destination bank's certificate is not avaiable!");
             gio::output("Account may not be registered with sra!");
             gio::output("Account may have been deregistered with sra!");
             return false;
         }
         $r = $net->send($m);
         $s = GsonCrypt::unseal($r);
         $r = $s ? Gmsg::extract($s) : Gmsg::extract($r);
         unset($net);
         if (!$r || !$r['status']) {
             gio::output("Deposit of {$ramt} coins to {$to} Failed!");
             gio::output($r['response']);
             return false;
         } else {
             $old = storage::load($paths['srakey']);
             foreach ($getcoins as $id => $coin) {
                 $getcoins[$id]['secret'] = $secret[$id];
                 $val = $coin['value'];
                 $old[$val][$id] =& $getcoins[$id];
             }
             storage::save($old, $paths['srakey']);
             storage::save($coins);
             gio::output("Deposit of {$ramt} coins to {$to} was successful");
             return true;
         }
     }
 }
Exemple #2
0
function main($mainmsg)
{
    gio::output(config::$walletMessage);
    $net = new Gnet();
    $inerr = 0;
    while (true) {
        $inmsg = array();
        if (account::isCreated()) {
            $inmsg["d"] = "Destroy Account";
            $dmsg = $mainmsg + $inmsg;
        } else {
            $inmsg["c"] = "Create Wallet Account [Merchant/Client]";
            $dmsg = $inmsg;
        }
        $dmsg["x"] = "Exit";
        if (!$inerr) {
            gio::output();
            foreach ($dmsg as $k => $v) {
                $k = strtoupper($k);
                gio::output("{$k} - {$v}");
            }
            gio::output();
            $msg = "Enter your choice and press enter";
        }
        $inerr = 0;
        $c = gio::input("{$msg}");
        if (!array_key_exists($c, $dmsg)) {
            $c = null;
        }
        switch ($c) {
            case 1:
                $a = account::address();
                gio::output("Your wallet address is: {$a}");
                break;
            case 2:
                $m = transaction::request();
                gio::output($m[1]);
                break;
            case 3:
                transaction::grant();
                break;
            case 4:
                $n = account::balance($coins);
                gio::output("Total value of eCash units: {$n}");
                if ($n && gio::confirm("Do you wish to see their Id's")) {
                    foreach ($coins as $val => $ccs) {
                        foreach ($ccs as $i => $coin) {
                            gio::output("Ecash ID: {$i}");
                            foreach ($coin as $id => $c) {
                                if ($id == "token") {
                                    $c = md5($c);
                                }
                                if ($id == "hash") {
                                    $c = sha1($c);
                                }
                                if ($id == "mined") {
                                    $c = date(config::$timeFormat, $c);
                                }
                                gio::output("{$id}=>{$c}");
                            }
                            gio::output();
                        }
                    }
                }
                break;
            case 5:
                $o = gio::input("Enter the order id [EMPTY for all]");
                $f = null;
                if (gio::confirm("Do you want to create a file on your desktop")) {
                    do {
                        $f = gio::input("Enter the file name");
                    } while (!$f);
                }
                transaction::reports($o, $f);
                break;
            case 6:
                transaction::clearallrequests();
                break;
            case 7:
                account::merckey(gio::input("Enter the name of the file to write to your desktop"));
                break;
            case 8:
                $maxallowed = 1000;
                $v = gio::input("What value of eCash do you wish to mine", "integer");
                $n = gio::input("How many eCashes do you wish to mine", "integer");
                $c = mine::countcoins($null);
                unset($null);
                if ($n > $maxallowed || $c + $n > $maxallowed) {
                    $rem = $maxallowed - $c;
                    gio::output("You can not mine above {$maxallowed} eCashes!");
                    gio::output("You can mine {$rem} more eCashes!");
                } else {
                    $res = mine::ecash($n, $v);
                    if ($res) {
                        gio::output("You have successfully mined {$n} eCashes.");
                        gio::output("Mining process took " . Tools::arrtostr($res, ", "));
                    } else {
                        gio::output("Mining operation failed!");
                    }
                }
                break;
            case "c":
                account::create();
                break;
            case "d":
                gio::output("This action will irreversibly destroy your wallet and its contents");
                if (gio::confirm("Are you sure you want to destroy your account")) {
                    account::destroy();
                }
                break;
            case "x":
                $net = null;
                break 2;
            default:
                $inerr = 1;
                $msg = "Retry";
        }
        if (!$inerr) {
            gio::output("\n\n\n");
        }
    }
    if (isset($ret) && $ret != 0) {
        gio::output("An error occured while exiting...");
    }
    gio::output(config::$exitMessage);
    sleep(3);
}
Exemple #3
0
function main($mainmsg)
{
    gio::output(config::$walletMessage);
    $serv = popen("service.ecsh", 'r');
    $net = new Gnet();
    $inerr = 0;
    while (true) {
        if (!$inerr) {
            gio::output();
            foreach ($mainmsg as $k => $v) {
                gio::output("{$k} - {$v}");
            }
            gio::output();
            $msg = "Enter your choice and press enter";
        }
        $inerr = 0;
        $c = gio::input("{$msg}");
        switch ($c) {
            case 1:
                $tid = gio::input("Enter the transaction Id");
                $st = transaction::status($tid);
                if (!$st) {
                    gio::output("Transaction reference '{$tid}' not found");
                } else {
                    $rpt['order id'] = $st['order id'];
                    $rpt['order amount'] = $st['amount'];
                    $rpt['from'] = $st['client'];
                    $rpt['to'] = $st['merchant'];
                    $rpt['transaction time'] = date(config::$timeFormat, $st['acknowledgement']['completed']);
                    $rpt['description'] = $st['description'];
                    $rpt['transaction reference'] = $st['acknowledgement']['id'];
                    $rpt['response code'] = $st['acknowledgement']['status'];
                    $rpt['response message'] = $st['acknowledgement']['message'];
                    $rpt['ecash value tendered'] = $st['acknowledgement']['amount'];
                    $rpt['ecash tendered'] = $st['acknowledgement']['ecashids'];
                    gio::display($rpt);
                    if (gio::confirm("Do you want to save the report to a file")) {
                        $dest = gio::input("Enter full path to the file");
                        gio::display($rpt, $x);
                        if (!gio::saverawfile(join("\r\n", $x), $dest)) {
                            gio::output("Could not save the report to {$dest}");
                        } else {
                            gio::output("Report successfully saved to {$dest}");
                        }
                        unset($x);
                    }
                }
                break;
            case 2:
                $maxallowed = 1000;
                $v = gio::input("What value of eCash do you wish to mine", "integer");
                $n = gio::input("How many eCashes do you wish to mine", "integer");
                $c = mine::countcoins($null);
                unset($null);
                if ($n > $maxallowed || $c + $n > $maxallowed) {
                    $rem = $maxallowed - $c;
                    gio::output("You can not mine above {$maxallowed} eCashes!");
                    gio::output("You can mine {$rem} more eCashes!");
                } else {
                    $res = mine::coins($n, $v);
                    if ($res) {
                        gio::output("You have successfully mined {$n} eCashes.");
                        gio::output("Mining process took " . Tools::arrtostr($res, ", "));
                    } else {
                        gio::output("Mining operation failed!");
                    }
                }
                break;
            case 3:
                $n = mine::countcoins($coins);
                gio::output("A total of {$n} eCash value is available");
                if ($n && gio::confirm("Do you wish to see their Id's")) {
                    foreach ($coins as $val => $ccs) {
                        foreach ($ccs as $i => $coin) {
                            gio::output("Ecash ID: {$i}");
                            foreach ($coin as $id => $c) {
                                if ($id == "token") {
                                    $c = md5($c);
                                }
                                if ($id == "hash") {
                                    $c = sha1($c);
                                }
                                if ($id == "mined") {
                                    $c = date(config::$timeFormat, $c);
                                }
                                gio::output("{$id}=>{$c}");
                            }
                            gio::output();
                        }
                    }
                }
                break;
            case 4:
                $to = gio::input("Enter the wallet address");
                $amt = gio::input("Enter the amount to give");
                $res = account::give($to, $amt);
                break;
            case "x":
                $net->connect(config::$serviceAddress, intval(config::$servicePort));
                $net->send("shutdown");
                if ($serv) {
                    $ret = pclose($serv);
                }
                break 2;
            default:
                $inerr = 1;
                $msg = "Retry";
        }
        if (!$inerr) {
            gio::output("\n\n\n");
        }
    }
    if (isset($ret) && $ret != 0) {
        gio::output("An error occured while exiting...");
    }
    gio::output(config::$exitMessage);
    sleep(3);
}
Exemple #4
0
 public static function splitvalue($amt, $truesplit = true)
 {
     $bal = mine::countcoins($coins);
     if ($bal < $amt) {
         return false;
     }
     $vals = array_keys($coins);
     rsort($vals);
     $ch = array();
     foreach ($vals as $val) {
         if ($amt <= 0) {
             break;
         }
         if ($val > $amt) {
             continue;
         }
         if ($truesplit && $val >= $amt) {
             continue;
         }
         $ch[$val] = floor($amt / $val);
         if ($ch[$val] > count($coins[$val])) {
             $ch[$val] = count($coins[$val]);
         }
         $amt -= $ch[$val] * $val;
     }
     if ($amt > 0) {
         return false;
     }
     return $ch;
 }