public function get()
{
$parameter = NULL;
$cr = 0;
$display = NULL;
$api_prm = NULL;
$this->load->helper(array('printerstate', 'zimapi'));
$parameter = $this->input->get('p');
//return false if missing
if ($parameter) {
switch ($parameter) {
case PRINTERSTATE_PRM_EXTRUDER:
$cr = PrinterState_getExtruder($display);
//$abb_extruder
break;
case PRINTERSTATE_PRM_TEMPER:
// check which temperature we want
$has_e = $this->input->get('e');
$has_h = $this->input->get('h');
$has_v = $this->input->get('v');
if ($has_e === FALSE && $has_h === FALSE) {
$cr = ERROR_MISS_PRM;
} else {
if (!($has_e === FALSE) && !($has_h === FALSE)) {
$cr = ERROR_WRONG_PRM;
} else {
if (!($has_e === FALSE) && !($has_v === FALSE)) {
// refuse getting data not existed for mono extruder
if ($has_v == 'l' && $this->config->item('nb_extruder') == 1) {
$cr = ERROR_WRONG_PRM;
} else {
if (in_array($has_v, array('l', 'r'))) {
// $tmp_array = PrinterState_getExtruderTemperaturesAsArray();
// $cr = ERROR_OK;
// $display = ($has_v == 'l')
// ? $tmp_array[PRINTERSTATE_LEFT_EXTRUD]
// : $tmp_array[PRINTERSTATE_RIGHT_EXTRUD];
$cr = PrinterState_getTemperature($display, 'e', $has_v);
} else {
$cr = ERROR_WRONG_PRM;
}
}
} else {
$api_prm = $has_e === FALSE ? 'h' : 'e';
$cr = PrinterState_getTemperature($display, $api_prm);
}
}
}
break;
case PRINTERSTATE_PRM_CARTRIDGE:
$api_prm = $this->input->get('v');
// refuse getting data not existed for mono extruder
if ($api_prm == 'l' && $this->config->item('nb_extruder') == 1) {
$cr = ERROR_WRONG_PRM;
} else {
$cr = PrinterState_getCartridge($display, $api_prm);
}
break;
case PRINTERSTATE_PRM_INFO:
//TODO need add SSO account
$cr = ERROR_OK;
$display = PrinterState_getInfo();
break;
case 'render':
$this->_return_under_construction();
return;
break;
case PRINTERSTATE_PRM_ACCELERATION:
$cr = PrinterState_getAcceleration($display);
break;
case PRINTERSTATE_PRM_SPEED_MOVE:
case PRINTERSTATE_PRM_SPEED_EXTRUDE:
$cr = PrinterState_getSpeed($display);
break;
case PRINTERSTATE_PRM_COLDEXTRUSION:
$value = NULL;
$cr = PrinterState_getColdExtrusion($value);
if ($cr == ERROR_OK) {
if ($value == TRUE) {
$display = 'on';
} else {
$display = 'off';
}
}
break;
case PRINTERSTATE_PRM_FILAMENT:
$value = NULL;
$api_prm = $this->input->get('v');
// refuse getting data not existed for mono extruder
if ($api_prm == 'l' && $this->config->item('nb_extruder') == 1) {
$cr = ERROR_WRONG_PRM;
} else {
if ($api_prm) {
$cr = ERROR_OK;
$value = PrinterState_getFilamentStatus($api_prm);
if ($value == TRUE) {
$display = 'true';
} else {
$display = 'false';
}
} else {
$cr = ERROR_MISS_PRM;
}
}
break;
case PRINTERSTATE_PRM_ENDSTOP:
$status = NULL;
$abb_endstop = $this->input->get('axis');
$cr = PrinterState_getEndstop($abb_endstop, $status);
if ($cr == ERROR_OK) {
$display = $status ? 'on' : 'off';
}
break;
case PRINTERSTATE_PRM_STRIPLED:
$value = NULL;
$cr = PrinterState_getStripLedStatus($value);
if ($cr == ERROR_OK) {
if ($value == TRUE) {
$display = 'on';
} else {
$display = 'off';
}
}
break;
case PRINTERSTATE_PRM_HEADLED:
$value = NULL;
$cr = PrinterState_getTopLedStatus($value);
if ($cr == ERROR_OK) {
if ($value == TRUE) {
$display = 'on';
} else {
$display = 'off';
}
}
break;
case PRINTERSTATE_PRM_OFFSET:
$value = NULL;
$axis = $this->input->get('axis');
if ($axis) {
$cr = PrinterState_getOffset($axis, $value);
if ($cr == ERROR_OK) {
$display = $value;
}
} else {
$cr = ERROR_MISS_PRM;
}
break;
case PRINTERSTATE_PRM_POSITION:
$cr = PrinterState_getPosition($display);
break;
case ZIMAPI_PRM_CAPTURE:
$path_capture = '';
$password = $this->input->get('password');
if (!ZimAPI_checkCameraPassword($password)) {
$cr = ERROR_WRONG_PWD;
break;
}
$this->load->helper('file');
if (ZimAPI_cameraCapture($path_capture)) {
$this->output->set_content_type(get_mime_by_extension($path_capture))->set_output(@file_get_contents($path_capture));
return;
} else {
$cr = ERROR_INTERNAL;
}
break;
case ZIMAPI_PRM_VIDEO_MODE:
if (ZimAPI_checkCamera($display)) {
$cr = ERROR_OK;
} else {
$cr = ERROR_INTERNAL;
}
break;
case ZIMAPI_PRM_PRESET:
if (ZimAPI_getPreset($display)) {
$cr = ERROR_OK;
} else {
$cr = ERROR_INTERNAL;
}
break;
case ZIMAPI_PRM_UPGRADE:
if (ZimAPI_getUpgradeMode($display)) {
$cr = ERROR_OK;
} else {
$cr = ERROR_INTERNAL;
}
if ($display != 'off') {
$display = 'on';
}
break;
case ZIMAPI_PRM_PROXY:
if (ZimAPI_getTromboning()) {
$display = 'on';
} else {
$display = 'off';
}
$cr = ERROR_OK;
break;
case ZIMAPI_PRM_SSH:
$status_current = NULL;
if (ZimAPI_getSSH($status_current)) {
$cr = ERROR_OK;
if ($status_current) {
$display = 'on';
} else {
$display = 'off';
}
} else {
$cr = ERROR_INTERNAL;
}
break;
case ZIMAPI_PRM_STATS:
if (ZimAPI_getStatistic()) {
$display = 'on';
} else {
$display = 'off';
}
$cr = ERROR_OK;
break;
default:
$cr = ERROR_WRONG_PRM;
break;
}
} else {
$cr = ERROR_MISS_PRM;
}
if ($cr != ERROR_OK) {
$display = $cr . " " . t(MyERRMSG($cr));
}
$this->output->set_status_header($cr, $display);
// http_response_code($cr);
$this->output->set_content_type(RETURN_CONTENT_TYPE);
// echo $display;
$this->load->library('parser');
$this->parser->parse('plaintxt', array('display' => $display));
return;
}
function ZimAPI_cameraOff()
{
$CI =& get_instance();
$output = NULL;
$ret_val = 0;
$command = $CI->config->item('camera') . ZIMAPI_PRM_CAMERA_STOP;
$data_json = array();
$fp = 0;
$mode_current = '';
if (!ZimAPI_checkCamera($mode_current)) {
return FALSE;
} else {
if ($mode_current == ZIMAPI_VALUE_MODE_OFF) {
return TRUE;
} else {
if (ZimAPI_checkCameraInBlock()) {
return TRUE;
}
}
}
exec($command, $output, $ret_val);
if ($ret_val != ERROR_NORMAL_RC_OK) {
$CI =& get_instance();
$CI->load->helper('printerlog');
PrinterLog_logError('camera stop command error', __FILE__, __LINE__);
return FALSE;
}
$data_json = array(ZIMAPI_TITLE_MODE => ZIMAPI_VALUE_MODE_OFF, ZIMAPI_TITLE_COMMAND => NULL);
// write json file
$fp = fopen($CI->config->item('temp') . ZIMAPI_FILENAME_CAMERA, 'w');
if ($fp) {
fwrite($fp, json_encode($data_json));
fclose($fp);
} else {
$CI =& get_instance();
$CI->load->helper('printerlog');
PrinterLog_logError('write camera status error', __FILE__, __LINE__);
return FALSE;
}
return TRUE;
}
public function cancel()
{
$ret_val = NULL;
$this->load->helper('printer');
$ret_val = Printer_stopPrint();
if ($ret_val == TRUE) {
$template_data = array();
$array_status = array();
$this->load->library('parser');
$this->lang->load('printdetail', $this->config->item('language'));
$this->load->helper('zimapi');
if (Printer_checkCancelStatus() || !file_exists(ZIMAPI_FILEPATH_VIDEO_TS)) {
if (ZimAPI_checkCamera($mode_current) && $mode_current == ZIMAPI_VALUE_MODE_HLS_IMG) {
$this->load->helper('printerlog');
PrinterLog_logMessage('detected in hls image timelapse mode, do not set camera', __FILE__, __LINE__);
} else {
if (!ZimAPI_cameraOn(ZIMAPI_PRM_CAMERA_PRINTSTART)) {
$this->load->helper('printerlog');
PrinterLog_logError('can not set camera', __FILE__, __LINE__);
}
}
}
// parse the main body
$template_data = array('title' => t('Control your printing'), 'loading_player' => t('loading_player'), 'wait_info' => t('wait_hint_cancel'), 'finish_info' => t('finish_hint_cancel'), 'return_button' => t('Home'), 'return_url' => '/', 'video_url' => $this->config->item('video_url'), 'restart_url' => NULL, 'again_button' => t('Print again'));
if (CoreStatus_getStatusArray($array_status) && is_array($array_status) && isset($array_status[CORESTATUS_TITLE_PRINTMODEL])) {
if (strpos($array_status[CORESTATUS_TITLE_PRINTMODEL], CORESTATUS_VALUE_MID_PREFIXGCODE) === 0) {
// gcode library model
$gid = (int) substr($array_status[CORESTATUS_TITLE_PRINTMODEL], strlen(CORESTATUS_VALUE_MID_PREFIXGCODE));
$template_data['restart_url'] = '/printdetail/printgcode?id=' . $gid;
} else {
$abb_cartridge = NULL;
$restart_url = NULL;
switch ($array_status[CORESTATUS_TITLE_PRINTMODEL]) {
case CORESTATUS_VALUE_MID_SLICE:
$restart_url = '/printdetail/printslice';
break;
case CORESTATUS_VALUE_MID_PRIME_L:
$abb_cartridge = 'l';
case CORESTATUS_VALUE_MID_PRIME_R:
$abb_cartridge = is_null($abb_cartridge) ? 'r' : $abb_cartridge;
$restart_url = '/printdetail/printprime?v=' . $abb_cartridge;
$template_data['title'] = t('title_prime');
$template_data['again_button'] = t('prime_agin');
break;
case CORESTATUS_VALUE_MID_CALIBRATION:
$restart_url = '/printmodel/detail?id=calibration';
break;
default:
// treat as pre-sliced model
$restart_url = '/printdetail/printmodel?id=' . $array_status[CORESTATUS_TITLE_PRINTMODEL];
break;
}
$template_data['restart_url'] = $restart_url;
}
}
// parse all page
$this->_parseBaseTemplate(t('printdetail_cancel_pagetitle'), $this->parser->parse('printdetail/cancel', $template_data, TRUE));
return;
} else {
$this->load->helper('printerlog');
PrinterLog_logError('can not stop printing', __FILE__, __LINE__);
$this->output->set_status_header(403);
return;
}
return;
}
