Exemplo n.º 1
0
 /**
  * The service method runs the gateway application.  It turns the gateway 'on'.  You
  * have to call the service method as the last line of the gateway script after all of the
  * gateway configuration properties have been set.
  * 
  * Right now the service method also includes a very primitive debugging mode that
  * just dumps the raw amf input and output to files.  This may change in later versions.
  * The debugging implementation is NOT thread safe so be aware of file corruptions that
  * may occur in concurrent environments.
  */
 function service()
 {
     //Set the parameters for the charset handler
     CharsetHandler::setMethod($this->_charsetMethod);
     CharsetHandler::setPhpCharset($this->_charsetPhp);
     CharsetHandler::setSqlCharset($this->_charsetSql);
     //Attempt to call charset handler to catch any uninstalled extensions
     $ch = new CharsetHandler('flashtophp');
     $ch->transliterate('?');
     $ch2 = new CharsetHandler('sqltophp');
     $ch2->transliterate('?');
     $GLOBALS['amfphp']['actions'] = $this->actions;
     if (!isset($GLOBALS['HTTP_RAW_POST_DATA'])) {
         $GLOBALS['HTTP_RAW_POST_DATA'] = file_get_contents('php://input');
     }
     if (isset($GLOBALS["HTTP_RAW_POST_DATA"]) && $GLOBALS["HTTP_RAW_POST_DATA"] != "") {
         //Start NetDebug
         NetDebug::initialize();
         error_reporting($GLOBALS['amfphp']['errorLevel']);
         //Enable loose mode if requested
         if ($this->_looseMode) {
             ob_start();
         }
         $amf = new AMFObject($GLOBALS["HTTP_RAW_POST_DATA"]);
         // create the amf object
         if ($this->incomingMessagesFolder != NULL) {
             $mt = microtime();
             $pieces = explode(' ', $mt);
             file_put_contents($this->incomingMessagesFolder . 'in.' . $pieces[1] . '.' . substr($pieces[0], 2) . ".amf", $GLOBALS["HTTP_RAW_POST_DATA"]);
         }
         foreach ($this->filters as $key => $filter) {
             $filter($amf);
             //   invoke the first filter in the chain
         }
         $output = $amf->outputStream;
         // grab the output stream
         //Clear the current output buffer if requested
         if ($this->_looseMode) {
             if ($this->_obLogging !== FALSE) {
                 $this->_appendRawDataToFile($this->_obLogging, ob_get_clean());
             } else {
                 ob_end_clean();
             }
         }
         //Send content length header
         //Thanks to Alec Horley for pointing out the necessity
         //of this for FlashComm support
         header(AMFPHP_CONTENT_TYPE);
         // define the proper header
         header("Content-length: " . strlen($output));
         //Send expire header, apparently helps for SSL
         //Thanks to Gary Rogers for that
         //And also to Lucas Filippi from openAMF list
         //And to Robert Reinhardt who appears to be the first who
         //documented the bug
         //Finally to Gary who appears to have find a solution which works even more reliably
         if ($this->useSslFirstMethod) {
             $dateStr = date("D, j M Y ") . date("H:i:s", strtotime("-2 days"));
             header("Expires: {$dateStr} GMT");
             header("Pragma: no-store");
             header("Cache-Control: no-store");
         }
         //else don't send any special headers at all
         if ($this->outgoingMessagesFolder != NULL) {
             $mt = microtime();
             $pieces = explode(' ', $mt);
             file_put_contents($this->outgoingMessagesFolder . 'out.' . $pieces[1] . '.' . substr($pieces[0], 2) . ".amf", $output);
         }
         print $output;
         // flush the binary data
     } else {
         echo "<p>amfphp and this gateway are installed correctly. You may now connect " . "to this gateway from Flash.</p><p>Note: If you're reading an " . "old tutorial, it will tell you that you should see a download " . "window instead of this message. This confused people so this is " . "the new behaviour starting from amfphp 1.2.</p><p>" . "<a href='http://www.amfphp.org/docs'>View the amfphp documentation</p>";
     }
 }
Exemplo n.º 2
0
 /**
  * The service method runs the gateway application.  It turns the gateway 'on'.  You
  * have to call the service method as the last line of the gateway script after all of the
  * gateway configuration properties have been set.
  * 
  * Right now the service method also includes a very primitive debugging mode that
  * just dumps the raw amf input and output to files.  This may change in later versions.
  * The debugging implementation is NOT thread safe so be aware of file corruptions that
  * may occur in concurrent environments.
  */
 function service()
 {
     //Set the parameters for the charset handler
     CharsetHandler::setMethod($this->_charsetMethod);
     CharsetHandler::setPhpCharset($this->_charsetPhp);
     CharsetHandler::setSqlCharset($this->_charsetSql);
     //Attempt to call charset handler to catch any uninstalled extensions
     $ch = new CharsetHandler('flashtophp');
     $ch->transliterate('?');
     $ch2 = new CharsetHandler('sqltophp');
     $ch2->transliterate('?');
     $GLOBALS['amfphp']['actions'] = $this->actions;
     if (!isset($GLOBALS['HTTP_RAW_POST_DATA'])) {
         $GLOBALS['HTTP_RAW_POST_DATA'] = file_get_contents('php://input');
     }
     if (isset($GLOBALS["HTTP_RAW_POST_DATA"]) && $GLOBALS["HTTP_RAW_POST_DATA"] != "") {
         //Start NetDebug
         NetDebug::initialize();
         error_reporting($GLOBALS['amfphp']['errorLevel']);
         //Enable loose mode if requested
         if ($this->_looseMode) {
             ob_start();
         }
         $amf = new AMFObject($GLOBALS["HTTP_RAW_POST_DATA"]);
         // create the amf object
         if ($this->incomingMessagesFolder != NULL) {
             $mt = microtime();
             $pieces = explode(' ', $mt);
             file_put_contents($this->incomingMessagesFolder . 'in.' . $pieces[1] . '.' . substr($pieces[0], 2) . ".amf", $GLOBALS["HTTP_RAW_POST_DATA"]);
         }
         foreach ($this->filters as $key => $filter) {
             $filter($amf);
             //   invoke the first filter in the chain
         }
         $output = $amf->outputStream;
         // grab the output stream
         //Clear the current output buffer if requested
         if ($this->_looseMode) {
             ob_end_clean();
         }
         //Send content length header
         //Thanks to Alec Horley for pointing out the necessity
         //of this for FlashComm support
         header(AMFPHP_CONTENT_TYPE);
         // define the proper header
         if (Headers::getHeader('serviceBrowser') == true) {
             //Add the total time header
             $toAddPos = strpos($output, "СА");
             $time = (int) ((microtime_float() - $GLOBALS['amfphp']['startTime']) * 1000);
             $b = pack("d", $time);
             // pack the bytes
             if (AMFPHP_BIG_ENDIAN) {
                 // if we are a big-endian processor
                 $r = strrev($b);
             } else {
                 // add the bytes to the output
                 $r = $b;
             }
             $output = substr($output, 0, $toAddPos) . $r . substr($output, $toAddPos + 8);
         }
         //Send expire header, apparently helps for SSL
         //Thanks to Gary Rogers for that
         //And also to Lucas Filippi from openAMF list
         //And to Robert Reinhardt who appears to be the first who
         //documented the bug
         //Finally to Gary who appears to have find a solution which works even more reliably
         $dateStr = date("D, j M Y ") . date("H:i:s", strtotime("-2 days"));
         header("Expires: {$dateStr} GMT");
         header("Pragma: no-store");
         header("Cache-Control: no-store");
         //else don't send any special headers at all
         if ($this->outgoingMessagesFolder != NULL) {
             $mt = microtime();
             $pieces = explode(' ', $mt);
             file_put_contents($this->outgoingMessagesFolder . 'out.' . $pieces[1] . '.' . substr($pieces[0], 2) . ".amf", $output);
         }
         $doCompress = false;
         $outputCompression = @ini_get("zlib.output_compression");
         if (!$outputCompression) {
             if (strlen($output) > $this->_gzipCompressionThreshold && extension_loaded("zlib") && strpos($_SERVER['HTTP_ACCEPT_ENCODING'], 'gzip') !== FALSE && $this->_enableGzipCompression) {
                 $doCompress = true;
                 ob_start();
                 ob_start('ob_gzhandler');
             } else {
                 header("Content-length: " . strlen($output));
             }
         }
         print $output;
         // flush the binary data
         if ($doCompress) {
             ob_end_flush();
             header("Content-length: " . ob_get_length());
             ob_end_flush();
         }
     } else {
         $versionData = explode("\n", file_get_contents(APP . DS . "plugins" . DS . "cpamf" . DS . "version.txt"));
         $cpamfVersion = $versionData[count($versionData) - 1];
         echo "<p> CpAmf plugin v" . $cpamfVersion . " (CakePHP 1.2)</p>";
         echo "<p>amfphp and this gateway are installed correctly. You may now connect " . "to this gateway from Flash.</p>";
         if (function_exists("amf_decode")) {
             echo "<p>AMF C Extension is loaded " . ($GLOBALS['amfphp']['native'] ? "and enabled." : "but disabled") . "</p>";
         }
         echo "<p>Note: If you're reading an " . "old tutorial, it will tell you that you should see a download " . "window instead of this message. This confused people so this is " . "the new behaviour starting from amfphp 1.2.</p><p>" . "<a href='http://www.amfphp.org/docs'>View the amfphp documentation</p>" . "<p><a href='browser'>Load the service browser</a></p>";
         echo "<pre>";
     }
 }