Exemplo n.º 1
0
 /**
  * Validates any data provided to the stage.
  *
  * @access  public
  * @return  bool|Jaws_Error  Returns either true on success, or a Jaws_Error
  *                          containing the reason for failure.
  */
 function Validate()
 {
     if ($_SESSION['install']['predefined']) {
         return true;
     }
     $request = Jaws_Request::getInstance();
     $postReq = $request->fetch(array('secure', 'customize'), 'post');
     $_SESSION['secure'] = !empty($postReq['secure']);
     $_SESSION['customize'] = !empty($postReq['customize']);
     // try to entering to secure transformation mode
     if ($_SESSION['secure'] && (!isset($_SESSION['pub_key']) || empty($_SESSION['pub_key']))) {
         require_once JAWS_PATH . 'include/Jaws/Crypt.php';
         $pkey = Jaws_Crypt::Generate_RSA_KeyPair(512);
         if (!Jaws_Error::isError($pkey)) {
             $_SESSION['pub_key'] = $pkey['pub_key'];
             $_SESSION['pvt_key'] = $pkey['pvt_key'];
         } else {
             return new Jaws_Error(_t('INSTALL_AUTH_ERROR_RSA_KEY_GENERATION'), 0, JAWS_ERROR_WARNING);
         }
     }
     $key_file = INSTALL_PATH . 'key.txt';
     if (file_exists($key_file)) {
         $key = trim(file_get_contents($key_file));
         if ($key === $_SESSION['install']['Authentication']['key']) {
             _log(JAWS_LOG_DEBUG, "Input log and session key match");
             return true;
         }
         _log(JAWS_LOG_DEBUG, "The key found doesn't match the one below, please check that you entered the key correctly");
         return new Jaws_Error(_t('INSTALL_AUTH_ERROR_KEY_MATCH', 'key.txt'), 0, JAWS_ERROR_WARNING);
     }
     _log(JAWS_LOG_DEBUG, "Your key file was not found, please make sure you created it, and the web server is able to read it.");
     return new Jaws_Error(_t('INSTALL_AUTH_ERROR_KEY_FILE', 'key.txt'), 0, JAWS_ERROR_WARNING);
 }
Exemplo n.º 2
0
 /**
  * Builds the installer page.
  *
  * @access  public
  * @return  string      A block of valid XHTML to display an introduction and form.
  */
 function Display()
 {
     _log(JAWS_LOG_DEBUG, "Preparing configuration file");
     $tpl = new Jaws_Template(false, false);
     $tpl->Load('display.html', 'stages/WriteConfig/templates');
     $tpl->SetBlock('WriteConfig');
     $config_path = JAWS_PATH . 'config' . DIRECTORY_SEPARATOR;
     $tpl->setVariable('lbl_info', _t('INSTALL_CONFIG_INFO'));
     $tpl->setVariable('lbl_solution', _t('INSTALL_CONFIG_SOLUTION'));
     $tpl->setVariable('lbl_solution_permission', _t('INSTALL_CONFIG_SOLUTION_PERMISSION', $config_path));
     $tpl->setVariable('lbl_solution_upload', _t('INSTALL_CONFIG_SOLUTION_UPLOAD', $config_path . 'JawsConfig.php'));
     $tpl->SetVariable('lbl_loglevel', _t('INSTALL_CONFIG_LOGLEVEL'));
     $tpl->SetVariable('next', _t('GLOBAL_NEXT'));
     $request = Jaws_Request::getInstance();
     $loglevel = $request->fetch('loglevel', 'post');
     $loglevel = is_null($loglevel) ? JAWS_LOG_ERROR : (int) $loglevel;
     $_SESSION['install']['LogLevel'] = $loglevel;
     $tpl->SetVariable('config', $this->BuildConfig());
     $log_levels_messages = $GLOBALS['log']->_Log_Priority_Str;
     array_unshift($log_levels_messages, 'LOG_DISABLED');
     foreach ($log_levels_messages as $level => $title) {
         $tpl->SetBlock('WriteConfig/loglevel');
         $tpl->setVariable('level', $level);
         $tpl->setVariable('title', $title);
         $tpl->SetVariable('selected', $level == $loglevel ? 'selected="selected"' : '');
         $tpl->ParseBlock('WriteConfig/loglevel');
     }
     $tpl->ParseBlock('WriteConfig');
     return $tpl->Get();
 }
Exemplo n.º 3
0
 /**
  * Does any actions required to finish the stage.
  *
  * @access  public
  * @return  bool|Jaws_Error  Either true on success, or a Jaws_Error
  *                          containing the reason for failure.
  */
 function Run()
 {
     $paths = array('jaws_data', 'jaws_base_data', 'jaws_themes', 'jaws_base_themes', 'jaws_cache');
     $request = Jaws_Request::getInstance();
     $postedData = $request->fetch($paths, 'post');
     $postedData = array_filter($postedData);
     foreach ($paths as $path) {
         if (isset($postedData[$path])) {
             $_SESSION[strtoupper($path)] = $postedData[$path];
         } else {
             unset($_SESSION[strtoupper($path)]);
         }
     }
     return true;
 }
Exemplo n.º 4
0
 /**
  * Does any actions required to finish the stage, such as DB queries.
  *
  * @access  public
  * @return  bool|Jaws_Error  Either true on success, or a Jaws_Error
  *                          containing the reason for failure.
  */
 function Run()
 {
     $keys = array_keys($this->_Defaults);
     $keys[] = 'dbpass';
     $request = Jaws_Request::getInstance();
     $post = $request->fetch($keys, 'post');
     $post['dbpass'] = $request->fetch('dbpass', 'post', false);
     $request->reset();
     if (isset($_SESSION['upgrade']['data']['Database'])) {
         $post = $_SESSION['upgrade']['data']['Database'] + $post;
     }
     if ($_SESSION['secure']) {
         require_once JAWS_PATH . 'include/Jaws/Crypt.php';
         $JCrypt = Jaws_Crypt::getInstance(array('pvt_key' => $_SESSION['pvt_key'], 'pub_key' => $_SESSION['pub_key']));
         if (!Jaws_Error::isError($JCrypt)) {
             $post['dbpass'] = $JCrypt->decrypt($post['dbpass']);
         } else {
             return $JCrypt;
         }
     }
     if (substr($post['prefix'], -1) == '_') {
         $prefix = $post['prefix'];
     } elseif (strlen($post['prefix']) > 0) {
         $prefix = $post['prefix'] . '_';
     } else {
         $prefix = $post['prefix'];
     }
     if (!empty($post['path'])) {
         if (DIRECTORY_SEPARATOR != '/') {
             $post['path'] = str_replace('/', '\\', $post['path']);
         }
         if (substr($post['path'], -1) != DIRECTORY_SEPARATOR) {
             $post['path'] .= DIRECTORY_SEPARATOR;
         }
     }
     $_SESSION['upgrade']['Database'] = array('user' => trim($post['user']), 'password' => $post['dbpass'], 'isdba' => !empty($post['isdba']) ? 'true' : 'false', 'name' => trim($post['name']), 'path' => trim($post['path']), 'host' => trim($post['host']), 'port' => trim($post['port']), 'prefix' => $prefix, 'driver' => $post['driver']);
     // Connect to database
     require_once JAWS_PATH . 'include/Jaws/DB.php';
     $objDatabase = Jaws_DB::getInstance('default', $_SESSION['upgrade']['Database']);
     if (Jaws_Error::IsError($objDatabase)) {
         _log(JAWS_LOG_DEBUG, "There was a problem connecting to the database, please check the details and try again");
         return new Jaws_Error(_t('UPGRADE_DB_RESPONSE_CONNECT_FAILED'), 0, JAWS_ERROR_WARNING);
     }
     _log(JAWS_LOG_DEBUG, "Checking current database");
     $sql = "SELECT * FROM [[registry]]";
     $result = Jaws_DB::getInstance()->queryRow($sql);
     if (Jaws_Error::isError($result)) {
         _log(JAWS_LOG_DEBUG, "Something wrong happened while checking the current database, error is:");
         _log(JAWS_LOG_DEBUG, $result->getMessage());
         return new Jaws_Error($result->getMessage(), 0, JAWS_ERROR_ERROR);
     }
     _log(JAWS_LOG_DEBUG, "Connected to " . $_SESSION['upgrade']['Database']['driver'] . " database driver successfully.");
     return true;
 }
Exemplo n.º 5
0
 /**
  * Makes all validations to FS and PHP installation
  *
  * @access  public
  * @return  boolean If everything looks OK, we return true otherwise a Jaws_Error
  */
 function Validate()
 {
     $request = Jaws_Request::getInstance();
     $use_log = $request->fetch('use_log', 'post');
     //Set main session-log vars
     if (isset($use_log)) {
         $_SESSION['use_log'] = $use_log === 'yes' ? JAWS_LOG_DEBUG : false;
     } else {
         unset($_SESSION['use_log']);
     }
     _log(JAWS_LOG_DEBUG, "Validating install requirements...");
     if (version_compare(PHP_VERSION, MIN_PHP_VERSION, '<') == 1) {
         $text = _t('INSTALL_REQ_RESPONSE_PHP_VERSION', MIN_PHP_VERSION);
         $type = JAWS_ERROR_ERROR;
         _log(JAWS_LOG_DEBUG, $text);
         return new Jaws_Error($text, 0, $type);
     }
     if (!$this->_check_path('config', 'r')) {
         $text = _t('INSTALL_REQ_RESPONSE_DIR_PERMISSION', 'config');
         $type = JAWS_ERROR_ERROR;
     }
     if (!$this->_check_path(JAWS_DATA, 'rw', '')) {
         if (isset($text)) {
             $text = _t('INSTALL_REQ_RESPONSE_DIR_PERMISSION', _t('INSTALL_REQ_BAD'));
         } else {
             $text = _t('INSTALL_REQ_RESPONSE_DIR_PERMISSION', 'data');
         }
         $type = JAWS_ERROR_ERROR;
     }
     if (isset($text)) {
         _log(JAWS_LOG_DEBUG, $text);
         return new Jaws_Error($text, 0, $type);
     }
     $modules = get_loaded_extensions();
     $modules = array_map('strtolower', $modules);
     $db_state = false;
     foreach (array_keys($this->_db_drivers) as $ext) {
         $db_state = $db_state || in_array($ext, $modules);
     }
     if (!$db_state) {
         $text = _t('INSTALL_REQ_RESPONSE_EXTENSION', implode(' | ', array_keys($this->_db_drivers)));
         $type = JAWS_ERROR_ERROR;
         _log(JAWS_LOG_DEBUG, $text);
         return new Jaws_Error($text, 0, $type);
     }
     if (!in_array('xml', $modules)) {
         $text = _t('INSTALL_REQ_RESPONSE_EXTENSION', 'XML');
         $type = JAWS_ERROR_ERROR;
         _log(JAWS_LOG_DEBUG, $text);
         return new Jaws_Error($text, 0, $type);
     }
     return true;
 }
Exemplo n.º 6
0
 /**
  * Does any actions required to finish the stage, such as DB queries.
  *
  * @access  public
  * @return  bool|Jaws_Error  Either true on success, or a Jaws_Error
  *                          containing the reason for failure.
  */
 function Run()
 {
     $keys = array_keys($this->_Fields);
     $request = Jaws_Request::getInstance();
     $post = $request->fetch($keys, 'post');
     if (isset($_SESSION['install']['data']['Settings'])) {
         $post = $_SESSION['install']['data']['Settings'] + $post;
     }
     _log(JAWS_LOG_DEBUG, "Setting up main settings (site name, description, languages, copyrights, etc");
     $settings = array();
     $settings['site_name'] = $post['site_name'];
     $settings['site_slogan'] = $post['site_slogan'];
     $settings['site_author'] = $_SESSION['install']['CreateUser']['nickname'];
     $settings['copyright'] = date('Y') . ', ' . $post['site_name'];
     $settings['site_language'] = $post['site_language'];
     $settings['admin_language'] = $post['site_language'];
     $settings['site_email'] = $_SESSION['install']['CreateUser']['email'];
     foreach ($settings as $key => $value) {
         if (in_array($key, array('site_language', 'admin_language'))) {
             $GLOBALS['app']->Registry->update($key, $value, true, 'Settings');
         } else {
             $GLOBALS['app']->Registry->update($key, $value, false, 'Settings');
         }
     }
     if (!empty($post['site_sample'])) {
         // install sample gadgets/data
         $this->InstallSampleSite();
     }
     return true;
 }
Exemplo n.º 7
0
// Initialize the logger
$_SESSION['use_log'] = isset($_SESSION['use_log']) ? $_SESSION['use_log'] : false;
$logger = array('method' => 'LogToFile', 'options' => array('file' => JAWS_DATA . 'logs/.install.log'));
require JAWS_PATH . 'include/Jaws/Log.php';
$GLOBALS['log'] = new Jaws_Log($_SESSION['use_log'], $logger);
$GLOBALS['log']->Start();
require_once JAWS_PATH . 'include/Jaws/Const.php';
require_once JAWS_PATH . 'include/Jaws/Error.php';
require_once JAWS_PATH . 'include/Jaws/Utils.php';
require_once JAWS_PATH . 'include/Jaws/Gadget.php';
if (!isset($_SESSION['install'])) {
    $_SESSION['install'] = array('stage' => 0, 'lastStage' => array());
}
// Lets handle our requests
require JAWS_PATH . 'include/Jaws/Request.php';
$request = Jaws_Request::getInstance();
$lang = $request->fetch('language', 'post');
if (isset($lang)) {
    $_SESSION['install']['language'] = urlencode($lang);
} elseif (!isset($_SESSION['install']['language'])) {
    $_SESSION['install']['language'] = 'en';
}
include_once JAWS_PATH . 'include/Jaws/Translate.php';
$objTranslate = Jaws_Translate::getInstance(false);
if (isset($_SESSION['install']['language'])) {
    $objTranslate->SetLanguage($_SESSION['install']['language']);
}
$objTranslate->LoadTranslation('Global');
$objTranslate->LoadTranslation('Install', JAWS_COMPONENT_INSTALL);
require_once 'stagelist.php';
require_once 'JawsInstaller.php';
Exemplo n.º 8
0
 /**
  * Does any actions required to finish the stage, such as DB queries.
  *
  * @access  public
  * @return  bool|Jaws_Error  Either true on success, or a Jaws_Error
  *                          containing the reason for failure.
  */
 function Run()
 {
     $keys = array_keys($this->_Defaults);
     $keys[] = 'dbpass';
     $request = Jaws_Request::getInstance();
     $post = $request->fetch($keys, 'post');
     $post['dbpass'] = $request->fetch('dbpass', 'post', false);
     $request->reset();
     if (isset($_SESSION['install']['data']['Database'])) {
         $post = $_SESSION['install']['data']['Database'] + $post;
     }
     if ($_SESSION['secure']) {
         require_once JAWS_PATH . 'include/Jaws/Crypt.php';
         $JCrypt = Jaws_Crypt::getInstance(array('pvt_key' => $_SESSION['pvt_key'], 'pub_key' => $_SESSION['pub_key']));
         if (!Jaws_Error::isError($JCrypt)) {
             $post['dbpass'] = $JCrypt->decrypt($post['dbpass']);
         } else {
             return $JCrypt;
         }
     }
     if (substr($post['prefix'], -1) == '_') {
         $prefix = $post['prefix'];
     } elseif (strlen($post['prefix']) > 0) {
         $prefix = $post['prefix'] . '_';
     } else {
         $prefix = $post['prefix'];
     }
     if (!empty($post['path'])) {
         if (DIRECTORY_SEPARATOR != '/') {
             $post['path'] = str_replace('/', '\\', $post['path']);
         }
         if (substr($post['path'], -1) != DIRECTORY_SEPARATOR) {
             $post['path'] .= DIRECTORY_SEPARATOR;
         }
     }
     $_SESSION['install']['Database'] = array('user' => trim($post['user']), 'password' => $post['dbpass'], 'isdba' => !empty($post['isdba']) ? 'true' : 'false', 'name' => trim($post['name']), 'path' => trim($post['path']), 'host' => trim($post['host']), 'port' => trim($post['port']), 'prefix' => $prefix, 'driver' => $post['driver']);
     // Connect to database
     require_once JAWS_PATH . 'include/Jaws/DB.php';
     $objDatabase = Jaws_DB::getInstance('default', $_SESSION['install']['Database']);
     if (Jaws_Error::IsError($objDatabase)) {
         _log(JAWS_LOG_DEBUG, "There was a problem connecting to the database.");
         return new Jaws_Error(_t('INSTALL_DB_RESPONSE_CONNECT_FAILED'), 0, JAWS_ERROR_WARNING);
     }
     $variables = array();
     $variables['timestamp'] = Jaws_DB::getInstance()->date();
     $result = Jaws_DB::getInstance()->installSchema('Resources/schema/schema.xml', $variables);
     _log(JAWS_LOG_DEBUG, "Installing core schema");
     if (Jaws_Error::isError($result)) {
         _log(JAWS_LOG_DEBUG, $result->getMessage());
         return $result;
     }
     // Create application
     require_once JAWS_PATH . 'include/Jaws.php';
     $GLOBALS['app'] = jaws();
     $GLOBALS['app']->Registry->Init();
     $GLOBALS['app']->loadPreferences(array('language' => $_SESSION['install']['language']), false);
     Jaws_Translate::getInstance()->LoadTranslation('Install', JAWS_COMPONENT_INSTALL);
     // registry keys
     $result = $GLOBALS['app']->Registry->insertAll(array(array('version', JAWS_VERSION), array('gadgets_installed_items', ','), array('gadgets_disabled_items', ','), array('gadgets_autoload_items', ','), array('plugins_installed_items', ',')));
     if (Jaws_Error::isError($result)) {
         _log(JAWS_LOG_DEBUG, $result->getMessage());
     }
     $gadgets = array('Settings', 'ControlPanel', 'Components', 'UrlMapper', 'Layout', 'Users', 'Policy');
     foreach ($gadgets as $gadget) {
         $objGadget = Jaws_Gadget::getInstance($gadget);
         if (Jaws_Error::IsError($objGadget)) {
             _log(JAWS_LOG_DEBUG, "There was a problem installing core gadget: " . $gadget);
             return $objGadget;
         }
         $installer = $objGadget->installer->load();
         $result = $installer->InstallGadget();
         if (Jaws_Error::IsError($result)) {
             _log(JAWS_LOG_DEBUG, "There was a problem installing core gadget: " . $gadget);
             return $result;
         }
     }
     return true;
 }
Exemplo n.º 9
0
 /**
  * Parses a QUERY URI and if its valid it extracts the values from
  * it and creates $_GET variables for each value.
  *
  * @access  public
  * @return  bool    True on success, or False on failure
  */
 function Parse()
 {
     if (!$this->_enabled && !is_array($this->_maps)) {
         return false;
     }
     $request = Jaws_Request::getInstance();
     //If no path info is given but request method is post
     if (empty($this->_request_uri) && $_SERVER['REQUEST_METHOD'] == 'POST') {
         return true;
     }
     if (strpos($this->_request_uri, '=') !== false) {
         return true;
     }
     $params = explode('/', $this->_request_uri);
     $matched_but_ignored = false;
     foreach ($this->_maps as $gadget => $maps) {
         foreach ($maps as $map) {
             $use_custom = !$this->_custom_precedence;
             $has_custom = !empty($map['custom_map']);
             for ($i = 1; $i <= 2; $i++) {
                 $use_custom = !$use_custom;
                 if ($use_custom) {
                     if (!$has_custom) {
                         continue;
                     }
                     $route = $map['custom_map'];
                     $regexp = $map['custom_regexp'];
                     $custom = true;
                 } else {
                     $route = $map['map'];
                     $regexp = $map['regexp'];
                     $custom = false;
                 }
                 $url = $this->_request_uri;
                 $ext = $map['extension'];
                 $ext = $ext == '.' ? $this->_extension : $ext;
                 if (substr($url, -strlen($ext)) == $ext) {
                     $url = substr($url, 0, -strlen($ext));
                 }
                 if (preg_match($regexp, $url, $matches) == 1) {
                     if ($this->_restrict_multimap) {
                         if ($this->_custom_precedence && $has_custom && !$custom) {
                             $matched_but_ignored = true;
                             continue;
                         }
                         if (!$this->_custom_precedence && $custom) {
                             $matched_but_ignored = true;
                             continue;
                         }
                     }
                     // Gadget/Action
                     $request->update('gadget', $gadget, 'get');
                     $request->update('action', $map['action'], 'get');
                     // Params
                     if (isset($map['params']) && is_array($map['params'])) {
                         foreach ($map['params'] as $key => $value) {
                             $request->update($key, $value, 'get');
                         }
                     }
                     // Variables
                     preg_match_all('#{(\\w+)}#si', $route, $matches_vars);
                     if (is_array($matches_vars)) {
                         array_shift($matches);
                         foreach ($matches as $key => $value) {
                             $request->update($matches_vars[1][$key], rawurldecode($value), 'get');
                         }
                     }
                     return true;
                 }
             }
             // for
         }
         //foreach maps
     }
     // foreach gadgets
     if ($matched_but_ignored) {
         return false;
     }
     /**
      * OK, no alias and map found, so lets parse the path directly.
      * The first rule: it should have at least one value (the gadget name)
      */
     $params_count = count($params);
     if ($params_count >= 1) {
         if (!$this->_restrict_multimap || !$this->_enabled || !isset($params[1]) || !isset($this->_actions_maps[$params[0]][$params[1]])) {
             $request->update('gadget', $params[0], 'get');
             if (isset($params[1])) {
                 $request->update('action', $params[1], 'get');
             }
             /**
              * If we have a request via POST we should take those values, not the GET ones
              * However, I'm not pretty sure if we should allow gadget and action being passed
              * with /, cause officially (HTTP) you can't do that (params are passed via & not /)
              *
              * Next params following gadget/action should be parsed only if they come from a
              * GET request
              */
             //Ok, next values should be formed in pairs
             $params = array_slice($params, 2);
             $params_count = count($params);
             if ($params_count % 2 == 0) {
                 for ($i = 0; $i < $params_count; $i += 2) {
                     $request->update($params[$i], $params[$i + 1], 'get');
                 }
             }
             return true;
         }
     }
     return false;
 }
Exemplo n.º 10
0
 /**
  * Does any actions required to finish the stage, such as DB queries.
  *
  * @access  public
  * @return  bool|Jaws_Error  Either true on success, or a Jaws_Error
  *                          containing the reason for failure.
  */
 function Run()
 {
     $request = Jaws_Request::getInstance();
     $post = $request->fetch(array('username', 'email', 'nickname', 'password'), 'post');
     if (isset($_SESSION['install']['data']['CreateUser'])) {
         $post = $_SESSION['install']['data']['CreateUser'] + $post;
     }
     if ($_SESSION['secure']) {
         require_once JAWS_PATH . 'include/Jaws/Crypt.php';
         $JCrypt = Jaws_Crypt::getInstance(array('pvt_key' => $_SESSION['pvt_key'], 'pub_key' => $_SESSION['pub_key']));
         if (!Jaws_Error::isError($JCrypt)) {
             $post['password'] = $JCrypt->decrypt($post['password']);
         } else {
             return $JCrypt;
         }
     }
     $_SESSION['install']['CreateUser'] = array('username' => $post['username'], 'email' => $post['email'], 'nickname' => $post['nickname']);
     require_once JAWS_PATH . 'include/Jaws/DB.php';
     $objDatabase = Jaws_DB::getInstance('default', $_SESSION['install']['Database']);
     #if (Jaws_Error::IsError($objDatabase)) {
     #   return new Jaws_Error("There was a problem connecting to the database, please check the details and try again.", 0, JAWS_ERROR_WARNING);
     #}
     require_once JAWS_PATH . 'include/Jaws.php';
     $GLOBALS['app'] = jaws();
     $GLOBALS['app']->Registry->Init();
     $GLOBALS['app']->loadPreferences(array('language' => $_SESSION['install']['language']), false);
     Jaws_Translate::getInstance()->LoadTranslation('Install', JAWS_COMPONENT_INSTALL);
     require_once JAWS_PATH . 'include/Jaws/User.php';
     $userModel = new Jaws_User();
     $userInfo = $userModel->GetUser($post['username']);
     if (!Jaws_Error::IsError($userInfo)) {
         //username exists
         if (isset($userInfo['username'])) {
             _log(JAWS_LOG_DEBUG, "Update existing user");
             $res = $userModel->UpdateUser($userInfo['id'], array('username' => $post['username'], 'nickname' => $post['nickname'], 'email' => $post['email'], 'password' => $post['password']));
         } else {
             _log(JAWS_LOG_DEBUG, "Adding first/new admin user to Jaws");
             $res = $userModel->AddUser(array('username' => $post['username'], 'nickname' => $post['nickname'], 'email' => $post['email'], 'password' => $post['password'], 'superadmin' => true));
         }
     } else {
         $res = $userInfo;
     }
     if (Jaws_Error::IsError($res)) {
         _log(JAWS_LOG_DEBUG, "There was a problem while creating your user:");
         _log(JAWS_LOG_DEBUG, $res->GetMessage());
         return new Jaws_Error(_t('INSTALL_USER_RESPONSE_CREATE_FAILED'), 0, JAWS_ERROR_ERROR);
     }
     return true;
 }