public function detail()
{
$model_data = array();
$template_data = array();
$cr = 0;
$check_filament = array();
$change_filament = array();
$array_data = array();
$time_estimation = NULL;
$body_page = NULL;
$mono_model = FALSE;
$bicolor = $this->config->item('nb_extruder') >= 2;
$heat_bed = $this->config->item('heat_bed');
$enable_print = 'true';
$enable_exchange = 'disabled="disabled"';
// select disable
$calibration = FALSE;
$this->load->helper(array('printlist', 'printerstate', 'slicer', 'timedisplay'));
$this->load->library('parser');
$this->lang->load('printlist', $this->config->item('language'));
$this->lang->load('timedisplay', $this->config->item('language'));
$mid = $this->input->get('id');
// check model id, resend user to if not valid
if ($mid) {
if ($mid == 'calibration') {
$mid = ModelList_codeModelHash(PRINTLIST_MODEL_CALIBRATION);
$calibration = TRUE;
}
$cr = ModelList__getDetailAsArray($mid, $model_data, TRUE);
if ($cr != ERROR_OK || is_null($model_data)) {
$this->output->set_header('Location: /printmodel/listmodel');
return;
}
} else {
$this->output->set_header('Location: /printmodel/listmodel');
return;
}
// check the model is mono-color or 2 colors
if (isset($model_data[PRINTLIST_TITLE_LENG_F2]) && $model_data[PRINTLIST_TITLE_LENG_F2] > 0) {
$mono_model = FALSE;
} else {
$mono_model = TRUE;
}
// initialize variables
$check_filament = array('l' => t('ok'), 'r' => t('ok'));
$change_filament = array('l' => t('Change'), 'r' => t('Change'));
// check quantity of filament and get cartridge information (color)
// color1 => right, color2 => left
foreach (array('r', 'l') as $abb_filament) {
$data_cartridge = array();
$key_length = $abb_filament == 'l' ? PRINTLIST_TITLE_LENG_F2 : PRINTLIST_TITLE_LENG_F1;
$key_color = $abb_filament == 'l' ? PRINTLIST_TITLE_COLOR_F2 : PRINTLIST_TITLE_COLOR_F1;
if ($model_data[$key_length] <= 0) {
$check_filament[$abb_filament] = t('filament_not_need');
}
// check mono extruder case (normally, it's not necessary)
if ($bicolor == FALSE && $abb_filament == 'l') {
$cr = ERROR_MISS_LEFT_CART;
} else {
$cr = PrinterState_checkFilament($abb_filament, $model_data[$key_length], $data_cartridge);
}
if (in_array($cr, array(ERROR_OK, ERROR_MISS_LEFT_FILA, ERROR_MISS_RIGT_FILA, ERROR_LOW_LEFT_FILA, ERROR_LOW_RIGT_FILA))) {
$array_data[$abb_filament] = array(PRINTERSTATE_TITLE_COLOR => $data_cartridge[PRINTERSTATE_TITLE_COLOR], PRINTERSTATE_TITLE_EXT_TEMPER => $data_cartridge[PRINTERSTATE_TITLE_EXT_TEMPER]);
// set default temperature if pla
if ($data_cartridge[PRINTERSTATE_TITLE_MATERIAL] == PRINTERSTATE_DESP_MATERIAL_PLA) {
$array_data[$abb_filament][PRINTERSTATE_TITLE_EXT_TEMPER] = PRINTERSTATE_VALUE_FILAMENT_PLA_PRINT_TEMPER;
}
} else {
$array_data[$abb_filament] = array(PRINTERSTATE_TITLE_COLOR => PRINTERSTATE_VALUE_DEFAULT_COLOR, PRINTERSTATE_TITLE_EXT_TEMPER => SLICER_VALUE_DEFAULT_TEMPER);
}
$array_data[$abb_filament][PRINTERSTATE_TITLE_NEED_L] = $model_data[$key_length];
// treat error
switch ($cr) {
case ERROR_OK:
// do nothing if no error
break;
case ERROR_LOW_RIGT_FILA:
$check_filament['r'] = t('not enough');
break;
case ERROR_MISS_RIGT_FILA:
$check_filament['r'] = t('unloaded');
$change_filament['r'] = t('Load');
break;
case ERROR_MISS_RIGT_CART:
$check_filament['r'] = t('empty');
$change_filament['r'] = t('Load');
break;
case ERROR_LOW_LEFT_FILA:
$check_filament['l'] = t('not enough');
break;
case ERROR_MISS_LEFT_FILA:
$check_filament['l'] = t('unloaded');
$change_filament['l'] = t('Load');
break;
case ERROR_MISS_LEFT_CART:
$check_filament['l'] = t('empty');
$change_filament['l'] = t('Load');
break;
default:
$this->load->helper('printerlog');
PrinterLog_logError('not previewed return code for checking filament ' . $abb_filament, __FILE__, __LINE__);
// assign error message if necessary
$check_filament[$abb_filament] = t('error');
break;
}
if ($cr != ERROR_OK && $model_data[$key_length] > 0) {
$enable_print = 'false';
}
}
// get a more legible time of estimation
$time_estimation = TimeDisplay__convertsecond($model_data[PRINTLIST_TITLE_TIME], t('Time estimation: '), t('unknown'));
// check if we can inverse filament / exchange extruder or not
$cr = PrinterState_checkFilaments(array('l' => $array_data['r'][PRINTERSTATE_TITLE_NEED_L], 'r' => $array_data['l'][PRINTERSTATE_TITLE_NEED_L]));
if ($cr == ERROR_OK && $calibration == FALSE) {
$enable_exchange = NULL;
} else {
if ($mono_model == TRUE) {
if ($array_data['l'][PRINTERSTATE_TITLE_NEED_L] == 0) {
$check_filament['l'] = t('filament_not_enough_for_switch');
} else {
// ($array_data['r'][PRINTERSTATE_TITLE_NEED_L] == 0)
$check_filament['r'] = t('filament_not_enough_for_switch');
}
}
}
// show detail page if valid, parse the body of page
$template_data = array('home' => t('Home'), 'title' => $model_data[PRINTLIST_TITLE_NAME], 'image' => $model_data[PRINTLIST_TITLE_PIC][0], 'model_c_r' => $model_data[PRINTLIST_TITLE_COLOR_F1], 'model_c_l' => $model_data[PRINTLIST_TITLE_COLOR_F2], 'time' => $time_estimation, 'desp' => $model_data[PRINTLIST_TITLE_DESP], 'state_c_l' => $array_data['l'][PRINTERSTATE_TITLE_COLOR], 'state_c_r' => $array_data['r'][PRINTERSTATE_TITLE_COLOR], 'state_f_l' => $check_filament['l'], 'state_f_r' => $check_filament['r'], 'model_id' => $mid, 'title_current' => t('Filament'), 'change_filament_l' => $change_filament['l'], 'change_filament_r' => $change_filament['r'], 'need_filament_l' => $model_data[PRINTLIST_TITLE_LENG_F2], 'need_filament_r' => $model_data[PRINTLIST_TITLE_LENG_F1], 'temper_filament_l' => $array_data['l'][PRINTERSTATE_TITLE_EXT_TEMPER], 'temper_filament_r' => $array_data['r'][PRINTERSTATE_TITLE_EXT_TEMPER], 'print_model' => t('Print'), 'back' => t('back'), 'preview_title' => t('Preview'), 'desp_title' => t('Description'), 'color_suggestion' => t('color_suggestion'), 'temp_adjustments_l' => t('temp_adjustments_l'), 'temp_adjustments_r' => t('temp_adjustments_r'), 'chg_temperature' => t('chg_temperature'), 'error' => t('error'), 'filament_not_need' => t('filament_not_need'), 'filament_ok' => t('ok'), 'temper_max' => PRINTERSTATE_TEMPER_CHANGE_MAX, 'temper_min' => PRINTERSTATE_TEMPER_CHANGE_MIN, 'temper_delta' => PRINTERSTATE_TEMPER_CHANGE_VAL, 'exchange_on' => t('exchange_left'), 'exchange_off' => t('exchange_right'), 'exchange_extruder' => t('exchange_extruder'), 'random_prefix' => $mid . '_' . rand() . '_', 'enable_exchange' => $enable_exchange, 'enable_print' => $enable_print, 'bicolor_model' => $mono_model ? 'false' : 'true', 'bicolor_printer' => $bicolor ? 'true' : 'false', 'advanced' => t('advanced'), 'extrud_multiply' => t('extrud_multiply'), 'left_extrud_mult' => t('left_extrud_mult'), 'right_extrud_mult' => t('right_extrud_mult'), 'extrud_r' => PRINTERSTATE_EXT_MULTIPLY_DEFAULT, 'extrud_l' => PRINTERSTATE_EXT_MULTIPLY_DEFAULT, 'extrud_min' => PRINTERSTATE_EXT_MULTIPLY_MIN, 'extrud_max' => PRINTERSTATE_EXT_MULTIPLY_MAX, 'title_heatbed' => t('title_heatbed'), 'button_bed_off' => t('button_bed_off'), 'heat_bed' => $heat_bed ? 'true' : 'false', 'bed_temper_pla' => PRINTERSTATE_TEMPER_BED_PLA, 'bed_temper_abs' => PRINTERSTATE_TEMPER_BED_ABS, 'bed_temper_max' => PRINTERSTATE_TEMPER_MAX_H);
$this->_parseBaseTemplate(t('ZeePro Personal Printer 21 - Printing details'), $this->parser->parse('printlist/detail', $template_data, TRUE));
return;
}
public function status_ajax()
{
$template_data = array();
// $printing_status = '';
$ret_val = 0;
$data_status = array();
$time_remain = NULL;
$time_passed = NULL;
$temper_l = 0;
$temper_r = 0;
$temper_b = 0;
$finish_hint = NULL;
$hold_temper = 'false';
// $status_current = NULL;
$array_status = array();
$reload_player_times = 0;
$bicolor = $this->config->item('nb_extruder') >= 2;
$heat_bed = $this->config->item('heat_bed');
$this->load->helper(array('printer', 'timedisplay'));
$this->load->library('parser');
$this->lang->load('printdetail', $this->config->item('language'));
$this->lang->load('timedisplay', $this->config->item('language'));
$ret_val = Printer_checkPrintStatus($data_status);
if ($ret_val == FALSE) {
$this->load->helper('corestatus');
$ret_val = CoreStatus_setInIdle();
if ($ret_val == FALSE) {
// log internal error
$this->load->helper('printerlog');
PrinterLog_logError('can not set idle after printing', __FILE__, __LINE__);
}
if ($this->config->item('simulator')) {
// just set temperature for simulation
$this->load->helper('printerstate');
PrinterState_setExtruder('r');
PrinterState_setTemperature(20);
PrinterState_setExtruder('l');
PrinterState_setTemperature(20);
PrinterState_setExtruder('r');
}
$this->output->set_status_header(202);
return;
}
// treat time remaining for display
if (isset($data_status['print_remain'])) {
$time_remain = TimeDisplay__convertsecond($data_status['print_remain'], t('Time remaining: '), t('under calculating'));
} else {
$time_remain = t('Time remaining: ') . t('in_progress');
}
$time_passed = TimeDisplay__convertsecond($data_status['print_tpassed'], t('time_elapsed'));
// CoreStatus_checkInIdle($status_current, $array_status);
CoreStatus_getStatusArray($array_status);
if (isset($array_status[CORESTATUS_TITLE_PRINTMODEL]) && !in_array($array_status[CORESTATUS_TITLE_PRINTMODEL], array(CORESTATUS_VALUE_MID_PRIME_L, CORESTATUS_VALUE_MID_PRIME_R, CORESTATUS_VALUE_MID_CALIBRATION))) {
$reload_player_times = $data_status['print_inPhase'];
}
if ($data_status['print_percent'] == 100) {
if (isset($array_status[CORESTATUS_TITLE_PRINTMODEL]) && in_array($array_status[CORESTATUS_TITLE_PRINTMODEL], array(CORESTATUS_VALUE_MID_PRIME_L, CORESTATUS_VALUE_MID_PRIME_R))) {
$finish_hint = t('in_finish_prime');
} else {
$finish_hint = t('in_finish');
}
$hold_temper = 'true';
} else {
// $hold_temper = 'false';
$temper_l = $data_status['print_temperL'];
$temper_r = $data_status['print_temperR'];
$temper_b = $data_status['print_temperB'];
}
// parse the ajax part
$template_data = array('percent_title' => t('percent_title'), 'value_percent' => $data_status['print_percent'], 'print_remain' => $time_remain, 'print_passed' => $time_passed, 'hold_temper' => $hold_temper, 'print_temperL' => $bicolor ? t('Temperature of the left extruder: %d °C', array($temper_l)) : NULL, 'print_temperR' => $bicolor ? t('Temperature of the right extruder: %d °C', array($temper_r)) : t('print_temper_msg_mono', array($temper_r)), 'print_temperB' => $heat_bed ? t('print_temper_msg_bed', array($temper_b)) : NULL, 'value_temperL' => $bicolor ? $temper_l : 'null', 'value_temperR' => $temper_r, 'value_temperB' => $heat_bed ? $temper_b : 'null', 'in_finish' => $finish_hint, 'reload_player' => $reload_player_times);
$this->parser->parse('printdetail/status_ajax', $template_data);
$this->output->set_content_type('text/plain; charset=UTF-8');
return;
}