예제 #1
0
파일: rest.php 프로젝트: Jaesin/zim-web
 public function get()
 {
     $parameter = NULL;
     $cr = 0;
     $display = NULL;
     $api_prm = NULL;
     $this->load->helper(array('printerstate', 'zimapi'));
     $parameter = $this->input->get('p');
     //return false if missing
     if ($parameter) {
         switch ($parameter) {
             case PRINTERSTATE_PRM_EXTRUDER:
                 $cr = PrinterState_getExtruder($display);
                 //$abb_extruder
                 break;
             case PRINTERSTATE_PRM_TEMPER:
                 // check which temperature we want
                 $has_e = $this->input->get('e');
                 $has_h = $this->input->get('h');
                 $has_v = $this->input->get('v');
                 if ($has_e === FALSE && $has_h === FALSE) {
                     $cr = ERROR_MISS_PRM;
                 } else {
                     if (!($has_e === FALSE) && !($has_h === FALSE)) {
                         $cr = ERROR_WRONG_PRM;
                     } else {
                         if (!($has_e === FALSE) && !($has_v === FALSE)) {
                             // refuse getting data not existed for mono extruder
                             if ($has_v == 'l' && $this->config->item('nb_extruder') == 1) {
                                 $cr = ERROR_WRONG_PRM;
                             } else {
                                 if (in_array($has_v, array('l', 'r'))) {
                                     // 							$tmp_array = PrinterState_getExtruderTemperaturesAsArray();
                                     // 							$cr = ERROR_OK;
                                     // 							$display = ($has_v == 'l')
                                     // 									? $tmp_array[PRINTERSTATE_LEFT_EXTRUD]
                                     // 									: $tmp_array[PRINTERSTATE_RIGHT_EXTRUD];
                                     $cr = PrinterState_getTemperature($display, 'e', $has_v);
                                 } else {
                                     $cr = ERROR_WRONG_PRM;
                                 }
                             }
                         } else {
                             $api_prm = $has_e === FALSE ? 'h' : 'e';
                             $cr = PrinterState_getTemperature($display, $api_prm);
                         }
                     }
                 }
                 break;
             case PRINTERSTATE_PRM_CARTRIDGE:
                 $api_prm = $this->input->get('v');
                 // refuse getting data not existed for mono extruder
                 if ($api_prm == 'l' && $this->config->item('nb_extruder') == 1) {
                     $cr = ERROR_WRONG_PRM;
                 } else {
                     $cr = PrinterState_getCartridge($display, $api_prm);
                 }
                 break;
             case PRINTERSTATE_PRM_INFO:
                 //TODO need add SSO account
                 $cr = ERROR_OK;
                 $display = PrinterState_getInfo();
                 break;
             case 'render':
                 $this->_return_under_construction();
                 return;
                 break;
             case PRINTERSTATE_PRM_ACCELERATION:
                 $cr = PrinterState_getAcceleration($display);
                 break;
             case PRINTERSTATE_PRM_SPEED_MOVE:
             case PRINTERSTATE_PRM_SPEED_EXTRUDE:
                 $cr = PrinterState_getSpeed($display);
                 break;
             case PRINTERSTATE_PRM_COLDEXTRUSION:
                 $value = NULL;
                 $cr = PrinterState_getColdExtrusion($value);
                 if ($cr == ERROR_OK) {
                     if ($value == TRUE) {
                         $display = 'on';
                     } else {
                         $display = 'off';
                     }
                 }
                 break;
             case PRINTERSTATE_PRM_FILAMENT:
                 $value = NULL;
                 $api_prm = $this->input->get('v');
                 // refuse getting data not existed for mono extruder
                 if ($api_prm == 'l' && $this->config->item('nb_extruder') == 1) {
                     $cr = ERROR_WRONG_PRM;
                 } else {
                     if ($api_prm) {
                         $cr = ERROR_OK;
                         $value = PrinterState_getFilamentStatus($api_prm);
                         if ($value == TRUE) {
                             $display = 'true';
                         } else {
                             $display = 'false';
                         }
                     } else {
                         $cr = ERROR_MISS_PRM;
                     }
                 }
                 break;
             case PRINTERSTATE_PRM_ENDSTOP:
                 $status = NULL;
                 $abb_endstop = $this->input->get('axis');
                 $cr = PrinterState_getEndstop($abb_endstop, $status);
                 if ($cr == ERROR_OK) {
                     $display = $status ? 'on' : 'off';
                 }
                 break;
             case PRINTERSTATE_PRM_STRIPLED:
                 $value = NULL;
                 $cr = PrinterState_getStripLedStatus($value);
                 if ($cr == ERROR_OK) {
                     if ($value == TRUE) {
                         $display = 'on';
                     } else {
                         $display = 'off';
                     }
                 }
                 break;
             case PRINTERSTATE_PRM_HEADLED:
                 $value = NULL;
                 $cr = PrinterState_getTopLedStatus($value);
                 if ($cr == ERROR_OK) {
                     if ($value == TRUE) {
                         $display = 'on';
                     } else {
                         $display = 'off';
                     }
                 }
                 break;
             case PRINTERSTATE_PRM_OFFSET:
                 $value = NULL;
                 $axis = $this->input->get('axis');
                 if ($axis) {
                     $cr = PrinterState_getOffset($axis, $value);
                     if ($cr == ERROR_OK) {
                         $display = $value;
                     }
                 } else {
                     $cr = ERROR_MISS_PRM;
                 }
                 break;
             case PRINTERSTATE_PRM_POSITION:
                 $cr = PrinterState_getPosition($display);
                 break;
             case ZIMAPI_PRM_CAPTURE:
                 $path_capture = '';
                 $password = $this->input->get('password');
                 if (!ZimAPI_checkCameraPassword($password)) {
                     $cr = ERROR_WRONG_PWD;
                     break;
                 }
                 $this->load->helper('file');
                 if (ZimAPI_cameraCapture($path_capture)) {
                     $this->output->set_content_type(get_mime_by_extension($path_capture))->set_output(@file_get_contents($path_capture));
                     return;
                 } else {
                     $cr = ERROR_INTERNAL;
                 }
                 break;
             case ZIMAPI_PRM_VIDEO_MODE:
                 if (ZimAPI_checkCamera($display)) {
                     $cr = ERROR_OK;
                 } else {
                     $cr = ERROR_INTERNAL;
                 }
                 break;
             case ZIMAPI_PRM_PRESET:
                 if (ZimAPI_getPreset($display)) {
                     $cr = ERROR_OK;
                 } else {
                     $cr = ERROR_INTERNAL;
                 }
                 break;
             case ZIMAPI_PRM_UPGRADE:
                 if (ZimAPI_getUpgradeMode($display)) {
                     $cr = ERROR_OK;
                 } else {
                     $cr = ERROR_INTERNAL;
                 }
                 if ($display != 'off') {
                     $display = 'on';
                 }
                 break;
             case ZIMAPI_PRM_PROXY:
                 if (ZimAPI_getTromboning()) {
                     $display = 'on';
                 } else {
                     $display = 'off';
                 }
                 $cr = ERROR_OK;
                 break;
             case ZIMAPI_PRM_SSH:
                 $status_current = NULL;
                 if (ZimAPI_getSSH($status_current)) {
                     $cr = ERROR_OK;
                     if ($status_current) {
                         $display = 'on';
                     } else {
                         $display = 'off';
                     }
                 } else {
                     $cr = ERROR_INTERNAL;
                 }
                 break;
             case ZIMAPI_PRM_STATS:
                 if (ZimAPI_getStatistic()) {
                     $display = 'on';
                 } else {
                     $display = 'off';
                 }
                 $cr = ERROR_OK;
                 break;
             default:
                 $cr = ERROR_WRONG_PRM;
                 break;
         }
     } else {
         $cr = ERROR_MISS_PRM;
     }
     if ($cr != ERROR_OK) {
         $display = $cr . " " . t(MyERRMSG($cr));
     }
     $this->output->set_status_header($cr, $display);
     // 		http_response_code($cr);
     $this->output->set_content_type(RETURN_CONTENT_TYPE);
     // 		echo $display;
     $this->load->library('parser');
     $this->parser->parse('plaintxt', array('display' => $display));
     return;
 }
예제 #2
0
 public function timelapse()
 {
     $template_data = array();
     $array_info = array();
     $status_current = NULL;
     $array_status = array();
     $restart_url = NULL;
     $model_displayname = NULL;
     $show_storegcode = FALSE;
     $this->load->library('parser');
     $this->load->helper('zimapi');
     $this->lang->load('printdetail', $this->config->item('language'));
     if (CoreStatus_checkInIdle($status_current, $array_status) && array_key_exists(CORESTATUS_TITLE_PRINTMODEL, $array_status)) {
         $model_id = NULL;
         $abb_cartridge = NULL;
         $model_temper = NULL;
         if (strpos($array_status[CORESTATUS_TITLE_PRINTMODEL], CORESTATUS_VALUE_MID_PREFIXGCODE) === 0) {
             // gcode library model
             $gcode_info = array();
             $gid = (int) substr($array_status[CORESTATUS_TITLE_PRINTMODEL], strlen(CORESTATUS_VALUE_MID_PREFIXGCODE));
             $model_displayname = t('timelapse_info_modelname_unknown');
             $this->load->helper('printerstoring');
             $gcode_info = PrinterStoring_getInfo("gcode", $gid);
             if (!is_null($gcode_info) && array_key_exists("name", $gcode_info)) {
                 $model_displayname = $gcode_info["name"];
             }
             $array_info[] = array('title' => t('timelapse_info_modelname_title'), 'value' => $model_displayname);
             $restart_url = '/printdetail/printgcode?id=' . $gid;
         } else {
             switch ($array_status[CORESTATUS_TITLE_PRINTMODEL]) {
                 case CORESTATUS_VALUE_MID_SLICE:
                     $preset_id = NULL;
                     $model_filename = array();
                     $preset_name = t('timelapse_info_presetname_unknown');
                     $this->load->helper('slicer');
                     if (ERROR_OK == Slicer_getModelFile(0, $model_filename, TRUE)) {
                         foreach ($model_filename as $model_basename) {
                             if (strlen($model_displayname)) {
                                 $model_displayname .= ' + ' . $model_basename;
                             } else {
                                 $model_displayname = $model_basename;
                             }
                         }
                     } else {
                         $model_displayname = t('timelapse_info_modelname_slice');
                     }
                     $array_info[] = array('title' => t('timelapse_info_modelname_title'), 'value' => $model_displayname);
                     if (ZimAPI_getPreset($preset_id)) {
                         $array_json = array();
                         if (ERROR_OK == ZimAPI_getPresetInfoAsArray($preset_id, $array_json)) {
                             $preset_name = $array_json[ZIMAPI_TITLE_PRESET_NAME];
                         }
                     }
                     $array_info[] = array('title' => t('timelapse_info_presetname_title'), 'value' => $preset_name);
                     $restart_url = '/printdetail/printslice';
                     $show_storegcode = TRUE;
                     break;
                 case CORESTATUS_VALUE_MID_PRIME_R:
                     $abb_cartridge = 'r';
                     // treat priming in the same way
                 // treat priming in the same way
                 case CORESTATUS_VALUE_MID_PRIME_L:
                     // never reach here normally (no timelapse for priming in principe, just for safety)
                     $array_info[] = array('title' => t('timelapse_info_modelname_title'), 'value' => t('timelapse_info_modelname_prime'));
                     if (is_null($abb_cartridge)) {
                         $abb_cartridge = 'l';
                     }
                     $restart_url = '/printdetail/printprime?r&v=' . $abb_cartridge;
                     //TODO we lose callback info here
                     break;
                 case CORESTATUS_VALUE_MID_CALIBRATION:
                     // never reach here normally (no timelapse for calibration model, just for safety)
                     $this->load->helper('printlist');
                     $model_id = ModelList_codeModelHash(PRINTLIST_MODEL_CALIBRATION);
                     $restart_url = '/printmodel/detail?id=calibration';
                     // treat as a normal pre-sliced model
                 // treat as a normal pre-sliced model
                 default:
                     // treat as pre-sliced model
                     $model_data = array();
                     $model_displayname = t('timelapse_info_modelname_unknown');
                     if (is_null($model_id)) {
                         $this->load->helper('printlist');
                         $model_id = $array_status[CORESTATUS_TITLE_PRINTMODEL];
                     }
                     if (ERROR_OK == ModelList__getDetailAsArray($model_id, $model_data, TRUE)) {
                         $model_displayname = $model_data[PRINTLIST_TITLE_NAME];
                     }
                     $array_info[] = array('title' => t('timelapse_info_modelname_title'), 'value' => $model_displayname);
                     if (is_null($restart_url)) {
                         $restart_url = '/printdetail/printmodel?id=' . $model_id;
                     }
                     break;
             }
         }
         if (array_key_exists(CORESTATUS_TITLE_ELAPSED_TIME, $array_status)) {
             $display_time = NULL;
             $this->load->helper('timedisplay');
             $display_time = TimeDisplay__convertsecond($array_status[CORESTATUS_TITLE_ELAPSED_TIME], '');
             $array_info[] = array('title' => t('timelapse_info_elapsedtime_title'), 'value' => $display_time);
         }
         if ($this->config->item('nb_extruder') < 2 && array_key_exists(CORESTATUS_TITLE_P_TEMPER_R, $array_status) && $array_status[CORESTATUS_TITLE_P_TEMPER_R] > 0) {
             $model_temper = t('timelapse_info_temperature_value_mono', array($array_status[CORESTATUS_TITLE_P_TEMPER_R]));
         } else {
             if (array_key_exists(CORESTATUS_TITLE_P_TEMPER_L, $array_status) && $array_status[CORESTATUS_TITLE_P_TEMPER_L] > 0 && array_key_exists(CORESTATUS_TITLE_P_TEMPER_R, $array_status) && $array_status[CORESTATUS_TITLE_P_TEMPER_R] > 0) {
                 $model_temper = t('timelapse_info_temperature_values', array($array_status[CORESTATUS_TITLE_P_TEMPER_L], $array_status[CORESTATUS_TITLE_P_TEMPER_R]));
             } else {
                 if (array_key_exists(CORESTATUS_TITLE_P_TEMPER_R, $array_status) && $array_status[CORESTATUS_TITLE_P_TEMPER_R] > 0) {
                     $model_temper = t('timelapse_info_temperature_value_r', array($array_status[CORESTATUS_TITLE_P_TEMPER_R]));
                 } else {
                     if (array_key_exists(CORESTATUS_TITLE_P_TEMPER_L, $array_status) && $array_status[CORESTATUS_TITLE_P_TEMPER_L] > 0) {
                         $model_temper = t('timelapse_info_temperature_value_l', array($array_status[CORESTATUS_TITLE_P_TEMPER_L]));
                     }
                 }
             }
         }
         if ($model_temper) {
             if (array_key_exists(CORESTATUS_TITLE_P_TEMPER_B, $array_status) && $array_status[CORESTATUS_TITLE_P_TEMPER_B] > 0) {
                 $model_temper .= t('timelapse_info_extra_temperature_value_b', array($array_status[CORESTATUS_TITLE_P_TEMPER_B]));
             }
             $array_info[] = array('title' => t('timelapse_info_temperature_title'), 'value' => $model_temper);
         }
     } else {
         $this->load->helper('printerlog');
         PrinterLog_logError('unintended status detected in timelapse page: ' . $status_current, __FILE__, __LINE__);
         $this->output->set_header('Location: /');
         return;
     }
     // parse the main body
     $template_data = array('internet_ok' => @file_get_contents("https://sso.zeepro.com/login.ashx") === FALSE ? 'false' : 'true', 'loading_player' => t('timelapse_info'), 'finish_info' => t('Congratulation, your printing is complete!'), 'home_button' => t('Home'), 'home_popup_text' => t('home_popup_text'), 'yes' => t('Yes'), 'no' => t('No'), 'video_error' => t('video_error'), 'timelapse_title' => t('timelapse_title'), 'send_email_button' => t('send_email_button'), 'send_yt_button' => t('send_yt_button'), 'send_fb_button' => t('send_fb_button'), 'send_email_hint' => t('send_email_hint'), 'send_email_action' => t('send_email_action'), 'send_email_error' => t('send_email_error'), 'send_email_wrong' => t('send_email_wrong'), 'send_email_multi' => t('send_email_multi'), 'video_url' => '/tmp/' . ZIMAPI_FILENAME_TIMELAPSE . '?_=' . time(), 'timelapse_info_title' => t('timelapse_info_title'), 'timelapse_info' => $array_info, 'again_button' => t('Print again'), 'restart_url' => $restart_url ? $restart_url : '/', 'send_email_modelname' => $model_displayname, 'display_storegocde' => $show_storegcode ? 'true' : 'false', 'storegcode_checkbox' => t('storegcode_info'), 'storegcode_hint' => t('storegcode_name'), 'storegcode_err_cfm' => t('storegcode_err_cfm'), 'storegcode_title' => t('storegcode_title'));
     // parse all page
     $this->_parseBaseTemplate(t('ZeePro Personal Printer 21 - Printing details'), $this->parser->parse('printdetail/timelapse', $template_data, TRUE));
     return;
 }
예제 #3
0
function PrinterStoring_storeGcode($name)
{
    global $CFG;
    $CI =& get_instance();
    $gcode_library_path = $CFG->config['gcode_library'];
    $data_json = NULL;
    $array_length = array();
    $array_material = array();
    $nb_models = 0;
    $preset_id = NULL;
    // check if library folder exist
    if (@is_dir($gcode_library_path) == false) {
        $CI->load->helper('printerlog');
        PrinterLog_logError('gcode library folder does not exist', __FILE__, __LINE__);
        return ERROR_INTERNAL;
    }
    // get last unused ID
    if (($model_id = PrinterStoring__getLastId($gcode_library_path)) < 0) {
        $CI->load->helper('printerlog');
        PrinterLog_logError('could not get the last id from gcode library', __FILE__, __LINE__);
        return ERROR_INTERNAL;
    }
    // create model folder
    $model_folder = $gcode_library_path . sprintf('%06d', $model_id) . '/';
    if (@mkdir($model_folder) == false) {
        $CI->load->helper('printerlog');
        PrinterLog_logError('could not create the model folder', __FILE__, __LINE__);
        return ERROR_DISK_FULL;
    }
    // get length and material info
    $CI->load->helper('printerstate');
    if (ERROR_OK != PrinterState_getSlicedJson($data_json)) {
        return ERROR_INTERNAL;
    }
    foreach (array('r', 'l') as $abb_cartridge) {
        if (array_key_exists($abb_cartridge, $data_json) && array_key_exists(PRINTERSTATE_TITLE_NEED_L, $data_json[$abb_cartridge]) && $data_json[$abb_cartridge][PRINTERSTATE_TITLE_NEED_L] > 0) {
            $array_length[$abb_cartridge] = $data_json[$abb_cartridge][PRINTERSTATE_TITLE_NEED_L];
            $array_material[$abb_cartridge] = $data_json[$abb_cartridge][PRINTERSTATE_TITLE_MATERIAL];
            ++$nb_models;
        } else {
            $array_length[$abb_cartridge] = 0;
            $array_material[$abb_cartridge] = NULL;
        }
    }
    // get preset id
    $CI->load->helper('zimapi');
    if (!ZimAPI_getPreset($preset_id)) {
        $preset_id = NULL;
    }
    // create info file
    $info_file = $model_folder . PRINTERSTORING_FILE_INFO_JSON;
    $info = array("id" => $model_id, "name" => $name, PRINTERSTORING_TITLE_CREATE_TIME => time(), PRINTERSTORING_TITLE_LENG_R => $array_length['r'], PRINTERSTORING_TITLE_LENG_L => $array_length['l'], PRINTERSTORING_TITLE_MATER_R => $array_material['r'], PRINTERSTORING_TITLE_MATER_L => $array_material['l'], PRINTERSTORING_TITLE_PRESET_ID => $preset_id);
    if (!PrinterStoring__createInfoFile($info_file, $info)) {
        PrinterStoring_deleteGcode($model_id);
        $CI->load->helper('printerlog');
        PrinterLog_logError('could not create the model info file', __FILE__, __LINE__);
        return ERROR_DISK_FULL;
    }
    // store captured image
    $CI->load->helper('zimapi');
    $image_path = ZIMAPI_FILEPATH_CAPTURE;
    if (file_exists($image_path) === false) {
        $CI->load->helper('printerlog');
        PrinterLog_logError('could not find the captured image', __FILE__, __LINE__);
        return ERROR_IMG_NOTFOUND;
    } elseif (!copy($image_path, $model_folder . PRINTERSTORING_FILE_IMG_JPG)) {
        $CI->load->helper('printerlog');
        PrinterLog_logError('could not store the captured image', __FILE__, __LINE__);
        return ERROR_DISK_FULL;
    }
    // store file(s)
    $CI->load->helper('slicer');
    $file_path = $CI->config->item('temp') . SLICER_FILE_MODEL;
    if (@file_exists($file_path) == false) {
        PrinterStoring_deleteGcode($model_id);
        $CI->load->helper('printerlog');
        PrinterLog_logError('could not find the gcode model', __FILE__, __LINE__);
        return ERROR_GCODE_NOTFOUND;
    } elseif (!PrinterStoring__storeModelFile($model_folder . PRINTERSTORING_FILE_GCODE_BZ2, $file_path)) {
        PrinterStoring_deleteGcode($model_id);
        $CI->load->helper('printerlog');
        PrinterLog_logError('disk full, could not store the gcode file', __FILE__, __LINE__);
        return ERROR_DISK_FULL;
    }
    // check disk free space
    if (!PrinterStoring__checkFreeSpace()) {
        PrinterStoring_deleteGcode($model_id);
        $CI->load->helper('printerlog');
        PrinterLog_logError('overpass user library minimum free space limit', __FILE__, __LINE__);
        return ERROR_DISK_FULL;
    }
    // stats info
    $CI->load->helper('printerlog');
    PrinterLog_statsLibraryGcode(PRINTERLOG_STATS_LABEL_LOAD, $nb_models);
    return ERROR_OK;
}
예제 #4
0
 function slice_model_ajax()
 {
     $cr = 0;
     $array_cartridge = array();
     $display = NULL;
     $id_preset = $this->input->get('id');
     // 		$density = $this->input->get('density');
     // 		$skirt = $this->input->get('skirt');
     // 		$raft = $this->input->get('raft');
     // 		$support = $this->input->get('support');
     $heat_bed = $this->config->item('heat_bed') && (int) $this->input->get('hb') > 0;
     $array_setting = array();
     $custom_change = FALSE;
     $this->load->helper('slicer');
     // set and load preset into slicer
     if ($id_preset) {
         if ($id_preset == 'previous') {
             $cr = ZimAPI_getPreset($id_preset);
         } else {
             $cr = ZimAPI_setPreset($id_preset);
         }
     } else {
         $cr = ERROR_MISS_PRM;
     }
     if ($cr == ERROR_OK) {
         $cr = Slicer_reloadPreset();
     }
     // load 4 extra parameters
     //TODO finish me (syntax in comment need be changed to function)
     // 		if ($density !== FALSE) {
     // 			if (FALSE == strpos('%', $density)) {
     // 				$density = (float)$density;
     // 				if ($density <= 0 || $density >= 1) {
     // 					$cr = ERROR_MISS_PRM;
     // 					break;
     // 				}
     // 			}
     // 			$array_setting['fill_density'] = $density;
     // 		}
     // 		if ($skirt !== FALSE) {
     // 			$array_setting['skirts'] = ((int)$skirt == 1) ? 1 : 0;
     // 		}
     // 		if ($raft !== FALSE) {
     // 			$array_setting['raft_layers'] = ((int)$raft == 1) ? 1 : 0;
     // 		}
     // 		if ($support !== FALSE) {
     // 			$array_setting['support_material'] = ((int)$support == 1) ? 1 : 0;
     // 		}
     // 		if (count($array_setting) == 0) {
     // 			$cr = ERROR_MISS_PRM;
     // 		}
     // 		else if ($cr == ERROR_OK) {
     // 			$cr = Slicer_changeParameter($array_setting);
     // 		}
     // check platform and filament present (do not check filament quantity)
     if ($cr == ERROR_OK) {
         $cr = Slicer_checkPlatformColor($array_cartridge, $custom_change);
     }
     if ($cr == ERROR_OK) {
         $cr = Slicer_changeTemperByCartridge($array_cartridge, $heat_bed);
     }
     // start slice command after checking filament
     if ($cr == ERROR_OK) {
         // we prefer to slice remotely except modified AMF
         if ($this->config->item('simulator')) {
             $custom_change = TRUE;
             // force local slicing for simulator
         }
         $cr = Slicer_slice(!$custom_change);
     }
     $display = $cr . " " . t(MyERRMSG($cr));
     $this->output->set_status_header($cr, $display);
     $this->output->set_content_type('txt_u');
     $this->load->library('parser');
     $this->parser->parse('plaintxt', array('display' => $display));
     //optional
     return;
 }
예제 #5
0
function PrinterState_prepareStatsSliceLabel($end_slice = FALSE)
{
    $stats_info = array();
    $preset_id = NULL;
    $model_filename = array();
    $array_slice = array();
    $array_check = array('l' => array(PRINTERLOG_STATS_FILA_TYPE_L, PRINTERLOG_STATS_FILA_COLOR_L, PRINTERLOG_STATS_FILA_USED_L), 'r' => array(PRINTERLOG_STATS_FILA_TYPE_R, PRINTERLOG_STATS_FILA_COLOR_R, PRINTERLOG_STATS_FILA_USED_R));
    $CI =& get_instance();
    $CI->load->helper(array('slicer', 'zimapi'));
    // remove unused filament
    if ($end_slice == TRUE) {
        if (ERROR_OK == PrinterState_getSlicedJson($array_slice)) {
            foreach (array('r', 'l') as $abb_filament) {
                if (!isset($array_slice[$abb_filament])) {
                    unset($array_check[$abb_filament]);
                }
            }
        }
    }
    // filament info
    foreach ($array_check as $abb_filament => $assign_key) {
        $json_cartridge = array();
        if (ERROR_OK == PrinterState_getCartridgeAsArray($json_cartridge, $abb_filament)) {
            $stats_info[$assign_key[0]] = $json_cartridge[PRINTERSTATE_TITLE_MATERIAL];
            $stats_info[$assign_key[1]] = $json_cartridge[PRINTERSTATE_TITLE_COLOR];
            if ($end_slice == TRUE) {
                $stats_info[$assign_key[2]] = $array_slice[$abb_filament][PRINTERSTATE_TITLE_NEED_L];
            }
        }
    }
    // model name
    if (ERROR_OK == Slicer_getModelFile(0, $model_filename, TRUE)) {
        $model_displayname = NULL;
        foreach ($model_filename as $model_basename) {
            if (strlen($model_displayname)) {
                $model_displayname .= ' + ' . $model_basename;
            } else {
                $model_displayname = $model_basename;
            }
        }
        if (strlen($model_displayname)) {
            $stats_info[PRINTERLOG_STATS_MODEL] = $model_displayname;
        }
    }
    // preset name
    if (ZimAPI_getPreset($preset_id)) {
        $array_json = array();
        if (ERROR_OK == ZimAPI_getPresetInfoAsArray($preset_id, $array_json)) {
            $stats_info[PRINTERLOG_STATS_PRESET] = $array_json[ZIMAPI_TITLE_PRESET_NAME];
        }
    }
    return $stats_info;
}