public function offset_setting()
{
$template_data = array();
$error = '';
$this->load->library('parser');
$this->lang->load('printerstate/nozzles', $this->config->item('language'));
if ($_SERVER['REQUEST_METHOD'] == 'POST') {
$this->load->helper('printerstate');
$top_offset = $this->input->post('top_offset') * PRINTERSTATE_VALUE_FACTOR_NOZZLE_OFFSET;
$bot_offset = $this->input->post('bot_offset') * PRINTERSTATE_VALUE_FACTOR_NOZZLE_OFFSET;
$right_offset = $this->input->post('right_offset') * PRINTERSTATE_VALUE_FACTOR_NOZZLE_OFFSET;
$left_offset = $this->input->post('left_offset') * PRINTERSTATE_VALUE_FACTOR_NOZZLE_OFFSET;
if ($top_offset * $bot_offset != 0 || $right_offset * $left_offset != 0) {
$error .= t('invalid_input') . '<br/>';
} else {
$array_data = array();
if ($top_offset != 0) {
$array_data['Y'] = -$top_offset;
} else {
if ($bot_offset != 0) {
$array_data['Y'] = $bot_offset;
}
}
if ($right_offset != 0) {
$array_data['X'] = -$right_offset;
} else {
if ($left_offset != 0) {
$array_data['X'] = $left_offset;
}
}
if (count($array_data)) {
$cr = 0;
foreach (array('X', 'Y') as $axis) {
if (array_key_exists($axis, $array_data)) {
$value = 0;
$cr = PrinterState_getOffset($axis, $value);
if ($cr != ERROR_OK) {
$error .= t('marlin_error') . '<br/>';
$this->load->helper('printerlog');
PrinterLog_logError('get ancient offset error, axis: ' . $axis . ', cr: ' . $cr, __FILE__, __LINE__);
break;
}
$array_data[$axis] += $value;
// add new offset on the ancient offset
}
}
if (count($error)) {
// we have no error for getting ancient offset, goto setting offset
$cr = PrinterState_setOffset($array_data);
if ($cr == ERROR_WRONG_PRM) {
$error .= t('value_zone_error') . '<br/>';
$this->load->helper('printerlog');
PrinterLog_logError('pass value zone for offset', __FILE__, __LINE__);
} else {
if ($cr != ERROR_OK) {
$error .= t('marlin_error') . '<br/>';
$this->load->helper('printerlog');
PrinterLog_logError('set offset error, axis: ' . $axis . ', cr: ' . $cr, __FILE__, __LINE__);
} else {
$this->output->set_header('Location: /printerstate/nozzles_adjustment');
return;
}
}
}
}
}
}
$template_data = array('nozzles_title' => t('nozzles_title'), 'nozzles_intro' => t('nozzles_intro'), 'collapsible_1' => t('collapsible_1'), 'collapsible_2' => t('collapsible_2'), 'back' => t('back'), 'home' => t('home'), 'error' => $error);
$this->_parseBaseTemplate(t('nozzle_offset_pagetitle'), $this->parser->parse('printerstate/offset_setting', $template_data, TRUE));
return;
}
public function set()
{
$parameter = NULL;
$cr = 0;
$this->load->helper(array('printerstate', 'zimapi', 'slicer'));
$parameter = $this->input->get('p');
//return false if missing
if ($parameter) {
switch ($parameter) {
case PRINTERSTATE_PRM_EXTRUDER:
$api_prm = $this->input->get('v');
if ($api_prm) {
// refuse getting data not existed for mono extruder
if ($api_prm == 'l' && $this->config->item('nb_extruder') == 1) {
$cr = ERROR_WRONG_PRM;
} else {
$cr = PrinterState_setExtruder($api_prm);
}
} else {
$cr = ERROR_MISS_PRM;
}
break;
case PRINTERSTATE_PRM_TEMPER:
// check which temperature we want
$val_temper = 0;
$api_prm = NULL;
$val_temper = $this->input->get('v');
$has_e = $this->input->get('e');
$has_h = $this->input->get('h');
if ($has_e === FALSE && $has_h === FALSE) {
$cr = ERROR_MISS_PRM;
} else {
if (!($has_e === FALSE) && !($has_h === FALSE)) {
$cr = ERROR_WRONG_PRM;
} else {
$api_prm = $has_e === FALSE ? 'h' : 'e';
$cr = PrinterState_setTemperature($val_temper, $api_prm);
}
}
break;
case PRINTERSTATE_PRM_ACCELERATION:
$val_acceleration = (int) $this->input->get('v');
if ($val_acceleration) {
$cr = PrinterState_setAcceleration($val_acceleration);
} else {
$cr = ERROR_MISS_PRM;
}
break;
case PRINTERSTATE_PRM_SPEED_MOVE:
case PRINTERSTATE_PRM_SPEED_EXTRUDE:
$val_speed = (int) $this->input->get('v');
if ($val_speed) {
$cr = PrinterState_setSpeed($val_speed);
} else {
$cr = ERROR_MISS_PRM;
}
break;
case PRINTERSTATE_PRM_COLDEXTRUSION:
$this->_return_under_construction();
return;
break;
case PRINTERSTATE_PRM_STRIPLED:
$status_set = $this->input->get('v');
if ($status_set) {
$cr = PrinterState_setStripLed($status_set);
} else {
$cr = ERROR_MISS_PRM;
}
break;
case PRINTERSTATE_PRM_MOTOR_OFF:
$status_set = $this->input->get('v');
if ($status_set == 'off') {
$cr = PrinterState_disableSteppers();
} else {
if ($status_set) {
$cr = ERROR_WRONG_PRM;
} else {
$cr = ERROR_MISS_PRM;
}
}
break;
case PRINTERSTATE_PRM_HEADLED:
$status_set = $this->input->get('v');
if ($status_set) {
$cr = PrinterState_setHeadLed($status_set);
} else {
$cr = ERROR_MISS_PRM;
}
break;
case PRINTERSTATE_PRM_OFFSET:
$axis = $this->input->get('axis');
$val_offset = $this->input->get('adjustment');
if ($axis && $val_offset !== FALSE) {
$cr = PrinterState_setOffset(array($axis => $val_offset));
} else {
$cr = ERROR_MISS_PRM;
}
break;
case ZIMAPI_PRM_PASSWD:
$old_password = $this->input->get('o');
$password = $this->input->get('v');
if (ZimAPI_checkCameraPassword($old_password)) {
if (ZimAPI_setCameraPassword($password)) {
$cr = ERROR_OK;
} else {
$cr = ERROR_INTERNAL;
}
} else {
$cr = ERROR_WRONG_PWD;
}
break;
case ZIMAPI_PRM_VIDEO_MODE:
$set_status = $this->input->get('v');
$password = $this->input->get('s');
$parameter = $this->input->get('m');
if (!ZimAPI_checkCameraPassword($password)) {
$cr = ERROR_WRONG_PWD;
break;
}
if ($set_status && $set_status == 'off') {
if (ZimAPI_cameraOff()) {
$cr = ERROR_OK;
} else {
$cr = ERROR_INTERNAL;
}
} else {
if ($set_status && $set_status == 'on') {
// temporary change - jump out of verification if we have no parameter 20140811
if (!$parameter) {
$parameter = ZIMAPI_PRM_CAMERA_PRINTSTART;
}
if (ZimAPI_cameraOn($parameter)) {
$cr = ERROR_OK;
} else {
$cr = ERROR_INTERNAL;
}
// }
// else {
// $cr = ERROR_MISS_PRM;
// }
} else {
if ($set_status) {
$cr = ERROR_WRONG_PRM;
} else {
$cr = ERROR_MISS_PRM;
}
}
}
break;
case ZIMAPI_PRM_PRESET:
$id_preset = $this->input->get('id');
if ($id_preset) {
$cr = ZimAPI_setPreset($id_preset);
} else {
$cr = ERROR_MISS_PRM;
}
break;
case SLICER_PRM_PRM:
$density = $this->input->get('density');
$skirt = $this->input->get('skirt');
$raft = $this->input->get('raft');
$support = $this->input->get('support');
$array_setting = array();
if ($density !== FALSE) {
$density = (int) $density / 100;
if ($density <= 0 || $density >= 1) {
$cr = ERROR_MISS_PRM;
break;
}
$array_setting['fill_density'] = $density;
}
if ($skirt !== FALSE) {
$array_setting['skirts'] = (int) $skirt == 1 ? 1 : 0;
}
if ($raft !== FALSE) {
$array_setting['raft_layers'] = (int) $raft == 1 ? 1 : 0;
}
if ($support !== FALSE) {
$array_setting['support_material'] = (int) $support == 1 ? 1 : 0;
}
if (count($array_setting) == 0) {
$cr = ERROR_MISS_PRM;
} else {
$cr = Slicer_changeParameter($array_setting);
}
break;
case ZIMAPI_PRM_SSO_NAME:
$name = $this->input->get('name');
if ($name) {
$cr = ZimAPI_setPrinterSSOName($name);
} else {
$cr = ERROR_MISS_PRM;
}
break;
case ZIMAPI_PRM_UPGRADE:
$status_set = $this->input->get('v');
$profile = $this->input->get('profile');
if ($status_set) {
$cr = ZimAPI_setUpgradeMode($status_set, $profile);
} else {
$cr = ERROR_MISS_PRM;
}
break;
case ZIMAPI_PRM_PROXY:
$status_set = $this->input->get('v');
if ($status_set) {
$cr = ZimAPI_setTromboning($status_set);
} else {
$cr = ERROR_MISS_PRM;
}
break;
case ZIMAPI_PRM_SSH:
$status_set = $this->input->get('v');
if ($status_set) {
$cr = ZimAPI_setSSH($status_set);
} else {
$cr = ERROR_MISS_PRM;
}
break;
case ZIMAPI_PRM_STATS:
$status_set = $this->input->get('v');
if ($status_set) {
$cr = ZimAPI_setStatistic($status_set);
} else {
$cr = ERROR_MISS_PRM;
}
break;
default:
$cr = ERROR_WRONG_PRM;
break;
}
} else {
$cr = ERROR_MISS_PRM;
}
$this->_return_cr($cr);
return;
}
