コード例 #1
0
ファイル: IsoUnit.php プロジェクト: celest-time/prototype
 public function addTo(Temporal $temporal, $amount)
 {
     switch ($this) {
         case IsoFields::WEEK_BASED_YEARS():
             return $temporal->with(IsoFields::WEEK_BASED_YEAR(), Math::addExact($temporal->get(IsoFields::WEEK_BASED_YEAR()), $amount));
         case IsoFields::QUARTER_YEARS():
             // no overflow (256 is multiple of 4)
             return $temporal->plus($amount / 256, ChronoUnit::YEARS())->plus($amount % 256 * 3, ChronoUnit::MONTHS());
         default:
             throw new IllegalStateException("Unreachable");
     }
 }
コード例 #2
0
 function provider_factory_of_badTemporalUnit()
 {
     return [[0, CU::MICROS()], [0, CU::MILLIS()], [0, CU::MINUTES()], [0, CU::HOURS()], [0, CU::HALF_DAYS()], [0, CU::DAYS()], [0, CU::MONTHS()], [0, CU::YEARS()], [0, CU::DECADES()], [0, CU::CENTURIES()], [0, CU::MILLENNIA()]];
 }
コード例 #3
0
ファイル: Year.php プロジェクト: celest-time/prototype
 /**
  * Calculates the amount of time until another year in terms of the specified unit.
  * <p>
  * This calculates the amount of time between two {@code Year}
  * objects in terms of a single {@code TemporalUnit}.
  * The start and end points are {@code this} and the specified year.
  * The result will be negative if the end is before the start.
  * The {@code Temporal} passed to this method is converted to a
  * {@code Year} using {@link #from(TemporalAccessor)}.
  * For example, the amount in decades between two year can be calculated
  * using {@code startYear.until(endYear, DECADES)}.
  * <p>
  * The calculation returns a whole number, representing the number of
  * complete units between the two years.
  * For example, the amount in decades between 2012 and 2031
  * will only be one decade as it is one year short of two decades.
  * <p>
  * There are two equivalent ways of using this method.
  * The first is to invoke this method.
  * The second is to use {@link TemporalUnit#between(Temporal, Temporal)}:
  * <pre>
  *   // these two lines are equivalent
  *   amount = start.until(end, YEARS);
  *   amount = YEARS.between(start, end);
  * </pre>
  * The choice should be made based on which makes the code more readable.
  * <p>
  * The calculation is implemented in this method for {@link ChronoUnit}.
  * The units {@code YEARS}, {@code DECADES}, {@code CENTURIES},
  * {@code MILLENNIA} and {@code ERAS} are supported.
  * Other {@code ChronoUnit} values will throw an exception.
  * <p>
  * If the unit is not a {@code ChronoUnit}, then the result of this method
  * is obtained by invoking {@code TemporalUnit.between(Temporal, Temporal)}
  * passing {@code this} as the first argument and the converted input temporal
  * as the second argument.
  * <p>
  * This instance is immutable and unaffected by this method call.
  *
  * @param Temporal $endExclusive the end date, exclusive, which is converted to a {@code Year}, not null
  * @param TemporalUnit $unit the unit to measure the amount in, not null
  * @return int the amount of time between this year and the end year
  * @throws DateTimeException if the amount cannot be calculated, or the end
  *  temporal cannot be converted to a {@code Year}
  * @throws UnsupportedTemporalTypeException if the unit is not supported
  * @throws ArithmeticException if numeric overflow occurs
  */
 public function until(Temporal $endExclusive, TemporalUnit $unit)
 {
     $end = Year::from($endExclusive);
     if ($unit instanceof ChronoUnit) {
         $yearsUntil = $end->year - $this->year;
         // no overflow
         switch ($unit) {
             case ChronoUnit::YEARS():
                 return $yearsUntil;
             case ChronoUnit::DECADES():
                 return Math::div($yearsUntil, 10);
             case ChronoUnit::CENTURIES():
                 return Math::div($yearsUntil, 100);
             case ChronoUnit::MILLENNIA():
                 return Math::div($yearsUntil, 1000);
             case ChronoUnit::ERAS():
                 return $end->getLong(ChronoField::ERA()) - $this->getLong(ChronoField::ERA());
         }
         throw new UnsupportedTemporalTypeException("Unsupported unit: " . $unit);
     }
     return $unit->between($this, $end);
 }
コード例 #4
0
 public function test_isSupported_TemporalUnit()
 {
     //$this->assertEquals(self::TEST_2008_6_30_11_30_59_000000500()->isSupported((TemporalUnit) null), false); TODO
     $this->assertEquals(self::TEST_2008_6_30_11_30_59_000000500()->isUnitSupported(CU::NANOS()), true);
     $this->assertEquals(self::TEST_2008_6_30_11_30_59_000000500()->isUnitSupported(CU::MICROS()), true);
     $this->assertEquals(self::TEST_2008_6_30_11_30_59_000000500()->isUnitSupported(CU::MILLIS()), true);
     $this->assertEquals(self::TEST_2008_6_30_11_30_59_000000500()->isUnitSupported(CU::SECONDS()), true);
     $this->assertEquals(self::TEST_2008_6_30_11_30_59_000000500()->isUnitSupported(CU::MINUTES()), true);
     $this->assertEquals(self::TEST_2008_6_30_11_30_59_000000500()->isUnitSupported(CU::HOURS()), true);
     $this->assertEquals(self::TEST_2008_6_30_11_30_59_000000500()->isUnitSupported(CU::HALF_DAYS()), true);
     $this->assertEquals(self::TEST_2008_6_30_11_30_59_000000500()->isUnitSupported(CU::DAYS()), true);
     $this->assertEquals(self::TEST_2008_6_30_11_30_59_000000500()->isUnitSupported(CU::WEEKS()), true);
     $this->assertEquals(self::TEST_2008_6_30_11_30_59_000000500()->isUnitSupported(CU::MONTHS()), true);
     $this->assertEquals(self::TEST_2008_6_30_11_30_59_000000500()->isUnitSupported(CU::YEARS()), true);
     $this->assertEquals(self::TEST_2008_6_30_11_30_59_000000500()->isUnitSupported(CU::DECADES()), true);
     $this->assertEquals(self::TEST_2008_6_30_11_30_59_000000500()->isUnitSupported(CU::CENTURIES()), true);
     $this->assertEquals(self::TEST_2008_6_30_11_30_59_000000500()->isUnitSupported(CU::MILLENNIA()), true);
     $this->assertEquals(self::TEST_2008_6_30_11_30_59_000000500()->isUnitSupported(CU::ERAS()), true);
     $this->assertEquals(self::TEST_2008_6_30_11_30_59_000000500()->isUnitSupported(CU::FOREVER()), false);
 }
コード例 #5
0
 function data_fieldUnit()
 {
     return [[CF::YEAR(), CU::YEARS(), CU::FOREVER()], [CF::MONTH_OF_YEAR(), CU::MONTHS(), CU::YEARS()], [CF::DAY_OF_MONTH(), CU::DAYS(), CU::MONTHS()], [CF::DAY_OF_WEEK(), CU::DAYS(), CU::WEEKS()], [CF::DAY_OF_YEAR(), CU::DAYS(), CU::YEARS()], [CF::HOUR_OF_DAY(), CU::HOURS(), CU::DAYS()], [CF::MINUTE_OF_DAY(), CU::MINUTES(), CU::DAYS()], [CF::MINUTE_OF_HOUR(), CU::MINUTES(), CU::HOURS()], [CF::SECOND_OF_DAY(), CU::SECONDS(), CU::DAYS()], [CF::SECOND_OF_MINUTE(), CU::SECONDS(), CU::MINUTES()], [CF::MILLI_OF_DAY(), CU::MILLIS(), CU::DAYS()], [CF::MILLI_OF_SECOND(), CU::MILLIS(), CU::SECONDS()], [CF::MICRO_OF_SECOND(), CU::MICROS(), CU::SECONDS()], [CF::MICRO_OF_DAY(), CU::MICROS(), CU::DAYS()], [CF::NANO_OF_SECOND(), CU::NANOS(), CU::SECONDS()], [CF::NANO_OF_DAY(), CU::NANOS(), CU::DAYS()]];
 }
コード例 #6
0
ファイル: LocalDate.php プロジェクト: celest-time/prototype
 /**
  * Calculates the amount of time until another date in terms of the specified unit.
  * <p>
  * This calculates the amount of time between two {@code LocalDate}
  * objects in terms of a single {@code TemporalUnit}.
  * The start and end points are {@code this} and the specified date.
  * The result will be negative if the end is before the start.
  * The {@code Temporal} passed to this method is converted to a
  * {@code LocalDate} using {@link #from(TemporalAccessor)}.
  * For example, the amount in days between two dates can be calculated
  * using {@code startDate.until(endDate, DAYS)}.
  * <p>
  * The calculation returns a whole number, representing the number of
  * complete units between the two dates.
  * For example, the amount in months between 2012-06-15 and 2012-08-14
  * will only be one month as it is one day short of two months.
  * <p>
  * There are two equivalent ways of using this method.
  * The first is to invoke this method.
  * The second is to use {@link TemporalUnit#between(Temporal, Temporal)}:
  * <pre>
  *   // these two lines are equivalent
  *   amount = start.until(end, MONTHS);
  *   amount = MONTHS.between(start, end);
  * </pre>
  * The choice should be made based on which makes the code more readable.
  * <p>
  * The calculation is implemented in this method for {@link ChronoUnit}.
  * The units {@code DAYS}, {@code WEEKS}, {@code MONTHS}, {@code YEARS},
  * {@code DECADES}, {@code CENTURIES}, {@code MILLENNIA} and {@code ERAS}
  * are supported. Other {@code ChronoUnit} values will throw an exception.
  * <p>
  * If the unit is not a {@code ChronoUnit}, then the result of this method
  * is obtained by invoking {@code TemporalUnit.between(Temporal, Temporal)}
  * passing {@code this} as the first argument and the converted input temporal
  * as the second argument.
  * <p>
  * This instance is immutable and unaffected by this method call.
  *
  * @param Temporal $endExclusive the end date, exclusive, which is converted to a {@code LocalDate}, not null
  * @param TemporalUnit $unit the unit to measure the amount in, not null
  * @return int the amount of time between this date and the end date
  * @throws DateTimeException if the amount cannot be calculated, or the end
  *  temporal cannot be converted to a {@code LocalDate}
  * @throws UnsupportedTemporalTypeException if the unit is not supported
  * @throws ArithmeticException if numeric overflow occurs
  */
 public function until(Temporal $endExclusive, TemporalUnit $unit)
 {
     $end = LocalDate::from($endExclusive);
     if ($unit instanceof ChronoUnit) {
         switch ($unit) {
             case ChronoUnit::DAYS():
                 return $this->daysUntil($end);
             case ChronoUnit::WEEKS():
                 return Math::div($this->daysUntil($end), 7);
             case ChronoUnit::MONTHS():
                 return $this->monthsUntil($end);
             case ChronoUnit::YEARS():
                 return Math::div($this->monthsUntil($end), 12);
             case ChronoUnit::DECADES():
                 return Math::div($this->monthsUntil($end), 120);
             case ChronoUnit::CENTURIES():
                 return Math::div($this->monthsUntil($end), 1200);
             case ChronoUnit::MILLENNIA():
                 return Math::div($this->monthsUntil($end), 12000);
             case ChronoUnit::ERAS():
                 return $end->getLong(ChronoField::ERA()) - $this->getLong(ChronoField::ERA());
         }
         throw new UnsupportedTemporalTypeException("Unsupported unit: " . $unit);
     }
     return $unit->between($this, $end);
 }
コード例 #7
0
 /**
  * Returns the "first day of next year" adjuster, which returns a new date set to
  * the first day of the next year.
  * <p>
  * The ISO calendar system behaves as follows:<br>
  * The input 2011-01-15 will return 2012-01-01.
  * <p>
  * The behavior is suitable for use with most calendar systems.
  * It is equivalent to:
  * <pre>
  *  temporal.adjust(DAY_OF_YEAR, 1).plus(1, YEARS);
  * </pre>
  *
  * @return TemporalAdjuster the first day of next month adjuster, not null
  */
 public static function firstDayOfNextYear()
 {
     return self::fromCallable(function (Temporal $temporal) {
         return $temporal->with(ChronoField::DAY_OF_YEAR(), 1)->plus(1, ChronoUnit::YEARS());
     });
 }
コード例 #8
0
 function data_periodUntilUnit()
 {
     return [[$this->dtNoon(2000, 1, 1), $this->dtNoon(2000, 1, 1), CU::DAYS(), 0], [$this->dtNoon(2000, 1, 1), $this->dtNoon(2000, 1, 1), CU::WEEKS(), 0], [$this->dtNoon(2000, 1, 1), $this->dtNoon(2000, 1, 1), CU::MONTHS(), 0], [$this->dtNoon(2000, 1, 1), $this->dtNoon(2000, 1, 1), CU::YEARS(), 0], [$this->dtNoon(2000, 1, 1), $this->dtNoon(2000, 1, 1), CU::DECADES(), 0], [$this->dtNoon(2000, 1, 1), $this->dtNoon(2000, 1, 1), CU::CENTURIES(), 0], [$this->dtNoon(2000, 1, 1), $this->dtNoon(2000, 1, 1), CU::MILLENNIA(), 0], [$this->dtNoon(2000, 1, 15), $this->dtNoon(2000, 2, 14), CU::DAYS(), 30], [$this->dtNoon(2000, 1, 15), $this->dtNoon(2000, 2, 15), CU::DAYS(), 31], [$this->dtNoon(2000, 1, 15), $this->dtNoon(2000, 2, 16), CU::DAYS(), 32], [$this->dtNoon(2000, 1, 15), $this->dtNoon(2000, 2, 17), CU::WEEKS(), 4], [$this->dtNoon(2000, 1, 15), $this->dtNoon(2000, 2, 18), CU::WEEKS(), 4], [$this->dtNoon(2000, 1, 15), $this->dtNoon(2000, 2, 19), CU::WEEKS(), 5], [$this->dtNoon(2000, 1, 15), $this->dtNoon(2000, 2, 20), CU::WEEKS(), 5], [$this->dtNoon(2000, 1, 15), $this->dtNoon(2000, 2, 14), CU::MONTHS(), 0], [$this->dtNoon(2000, 1, 15), $this->dtNoon(2000, 2, 15), CU::MONTHS(), 1], [$this->dtNoon(2000, 1, 15), $this->dtNoon(2000, 2, 16), CU::MONTHS(), 1], [$this->dtNoon(2000, 1, 15), $this->dtNoon(2000, 3, 14), CU::MONTHS(), 1], [$this->dtNoon(2000, 1, 15), $this->dtNoon(2000, 3, 15), CU::MONTHS(), 2], [$this->dtNoon(2000, 1, 15), $this->dtNoon(2000, 3, 16), CU::MONTHS(), 2], [$this->dtNoon(2000, 1, 15), $this->dtNoon(2001, 1, 14), CU::YEARS(), 0], [$this->dtNoon(2000, 1, 15), $this->dtNoon(2001, 1, 15), CU::YEARS(), 1], [$this->dtNoon(2000, 1, 15), $this->dtNoon(2001, 1, 16), CU::YEARS(), 1], [$this->dtNoon(2000, 1, 15), $this->dtNoon(2004, 1, 14), CU::YEARS(), 3], [$this->dtNoon(2000, 1, 15), $this->dtNoon(2004, 1, 15), CU::YEARS(), 4], [$this->dtNoon(2000, 1, 15), $this->dtNoon(2004, 1, 16), CU::YEARS(), 4], [$this->dtNoon(2000, 1, 15), $this->dtNoon(2010, 1, 14), CU::DECADES(), 0], [$this->dtNoon(2000, 1, 15), $this->dtNoon(2010, 1, 15), CU::DECADES(), 1], [$this->dtNoon(2000, 1, 15), $this->dtNoon(2100, 1, 14), CU::CENTURIES(), 0], [$this->dtNoon(2000, 1, 15), $this->dtNoon(2100, 1, 15), CU::CENTURIES(), 1], [$this->dtNoon(2000, 1, 15), $this->dtNoon(3000, 1, 14), CU::MILLENNIA(), 0], [$this->dtNoon(2000, 1, 15), $this->dtNoon(3000, 1, 15), CU::MILLENNIA(), 1], [$this->dtEpoch(0, 0, 0, 0), $this->dtEpoch(0, 0, 0, 0), CU::NANOS(), 0], [$this->dtEpoch(0, 0, 0, 0), $this->dtEpoch(0, 0, 0, 0), CU::MICROS(), 0], [$this->dtEpoch(0, 0, 0, 0), $this->dtEpoch(0, 0, 0, 0), CU::MILLIS(), 0], [$this->dtEpoch(0, 0, 0, 0), $this->dtEpoch(0, 0, 0, 0), CU::SECONDS(), 0], [$this->dtEpoch(0, 0, 0, 0), $this->dtEpoch(0, 0, 0, 0), CU::MINUTES(), 0], [$this->dtEpoch(0, 0, 0, 0), $this->dtEpoch(0, 0, 0, 0), CU::HOURS(), 0], [$this->dtEpoch(0, 0, 0, 0), $this->dtEpoch(0, 0, 0, 0), CU::HALF_DAYS(), 0], [$this->dtEpoch(0, 0, 0, 0), $this->dtEpoch(2, 0, 0, 0), CU::NANOS(), 2 * 3600 * 1000000000], [$this->dtEpoch(0, 0, 0, 0), $this->dtEpoch(2, 0, 0, 0), CU::MICROS(), 2 * 3600 * 1000000], [$this->dtEpoch(0, 0, 0, 0), $this->dtEpoch(2, 0, 0, 0), CU::MILLIS(), 2 * 3600 * 1000], [$this->dtEpoch(0, 0, 0, 0), $this->dtEpoch(2, 0, 0, 0), CU::SECONDS(), 2 * 3600], [$this->dtEpoch(0, 0, 0, 0), $this->dtEpoch(2, 0, 0, 0), CU::MINUTES(), 2 * 60], [$this->dtEpoch(0, 0, 0, 0), $this->dtEpoch(2, 0, 0, 0), CU::HOURS(), 2], [$this->dtEpoch(0, 0, 0, 0), $this->dtEpoch(2, 0, 0, 0), CU::HALF_DAYS(), 0], [$this->dtEpoch(0, 0, 0, 0), $this->dtEpoch(14, 0, 0, 0), CU::NANOS(), 14 * 3600 * 1000000000], [$this->dtEpoch(0, 0, 0, 0), $this->dtEpoch(14, 0, 0, 0), CU::MICROS(), 14 * 3600 * 1000000], [$this->dtEpoch(0, 0, 0, 0), $this->dtEpoch(14, 0, 0, 0), CU::MILLIS(), 14 * 3600 * 1000], [$this->dtEpoch(0, 0, 0, 0), $this->dtEpoch(14, 0, 0, 0), CU::SECONDS(), 14 * 3600], [$this->dtEpoch(0, 0, 0, 0), $this->dtEpoch(14, 0, 0, 0), CU::MINUTES(), 14 * 60], [$this->dtEpoch(0, 0, 0, 0), $this->dtEpoch(14, 0, 0, 0), CU::HOURS(), 14], [$this->dtEpoch(0, 0, 0, 0), $this->dtEpoch(14, 0, 0, 0), CU::HALF_DAYS(), 1], [$this->dtEpoch(0, 0, 0, 0), $this->dtEpoch(2, 30, 40, 1500), CU::NANOS(), (2 * 3600 + 30 * 60 + 40) * 1000000000 + 1500], [$this->dtEpoch(0, 0, 0, 0), $this->dtEpoch(2, 30, 40, 1500), CU::MICROS(), (2 * 3600 + 30 * 60 + 40) * 1000000 + 1], [$this->dtEpoch(0, 0, 0, 0), $this->dtEpoch(2, 30, 40, 1500), CU::MILLIS(), (2 * 3600 + 30 * 60 + 40) * 1000], [$this->dtEpoch(0, 0, 0, 0), $this->dtEpoch(2, 30, 40, 1500), CU::SECONDS(), 2 * 3600 + 30 * 60 + 40], [$this->dtEpoch(0, 0, 0, 0), $this->dtEpoch(2, 30, 40, 1500), CU::MINUTES(), 2 * 60 + 30], [$this->dtEpoch(0, 0, 0, 0), $this->dtEpoch(2, 30, 40, 1500), CU::HOURS(), 2], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 15, 12, 30, 40, 499), CU::NANOS(), -1], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 15, 12, 30, 40, 500), CU::NANOS(), 0], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 15, 12, 30, 40, 501), CU::NANOS(), 1], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 15, 12, 30, 39, 500), CU::SECONDS(), -1], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 15, 12, 30, 39, 501), CU::SECONDS(), 0], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 15, 12, 30, 40, 499), CU::SECONDS(), 0], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 15, 12, 30, 40, 500), CU::SECONDS(), 0], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 15, 12, 30, 40, 501), CU::SECONDS(), 0], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 15, 12, 30, 41, 499), CU::SECONDS(), 0], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 15, 12, 30, 41, 500), CU::SECONDS(), 1], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 16, 12, 30, 40, 499), CU::NANOS(), -1 + 86400000000000], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 16, 12, 30, 40, 500), CU::NANOS(), 0 + 86400000000000], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 16, 12, 30, 40, 501), CU::NANOS(), 1 + 86400000000000], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 16, 12, 30, 39, 499), CU::SECONDS(), -2 + 86400], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 16, 12, 30, 39, 500), CU::SECONDS(), -1 + 86400], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 16, 12, 30, 39, 501), CU::SECONDS(), -1 + 86400], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 16, 12, 30, 40, 499), CU::SECONDS(), -1 + 86400], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 16, 12, 30, 40, 500), CU::SECONDS(), 0 + 86400], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 16, 12, 30, 40, 501), CU::SECONDS(), 0 + 86400], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 16, 12, 30, 41, 499), CU::SECONDS(), 0 + 86400], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 16, 12, 30, 41, 500), CU::SECONDS(), 1 + 86400], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 16, 12, 29, 40, 499), CU::MINUTES(), -2 + 24 * 60], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 16, 12, 29, 40, 500), CU::MINUTES(), -1 + 24 * 60], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 16, 12, 29, 40, 501), CU::MINUTES(), -1 + 24 * 60], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 16, 12, 30, 40, 499), CU::MINUTES(), -1 + 24 * 60], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 16, 12, 30, 40, 500), CU::MINUTES(), 0 + 24 * 60], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 16, 12, 30, 40, 501), CU::MINUTES(), 0 + 24 * 60], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 16, 12, 31, 40, 499), CU::MINUTES(), 0 + 24 * 60], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 16, 12, 31, 40, 500), CU::MINUTES(), 1 + 24 * 60], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 16, 11, 30, 40, 499), CU::HOURS(), -2 + 24], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 16, 11, 30, 40, 500), CU::HOURS(), -1 + 24], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 16, 11, 30, 40, 501), CU::HOURS(), -1 + 24], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 16, 12, 30, 40, 499), CU::HOURS(), -1 + 24], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 16, 12, 30, 40, 500), CU::HOURS(), 0 + 24], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 16, 12, 30, 40, 501), CU::HOURS(), 0 + 24], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 16, 13, 30, 40, 499), CU::HOURS(), 0 + 24], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 16, 13, 30, 40, 500), CU::HOURS(), 1 + 24], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 13, 12, 30, 40, 499), CU::DAYS(), -2], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 13, 12, 30, 40, 500), CU::DAYS(), -2], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 13, 12, 30, 40, 501), CU::DAYS(), -1], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 14, 12, 30, 40, 499), CU::DAYS(), -1], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 14, 12, 30, 40, 500), CU::DAYS(), -1], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 14, 12, 30, 40, 501), CU::DAYS(), 0], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 15, 12, 30, 40, 499), CU::DAYS(), 0], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 15, 12, 30, 40, 500), CU::DAYS(), 0], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 15, 12, 30, 40, 501), CU::DAYS(), 0], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 16, 12, 30, 40, 499), CU::DAYS(), 0], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 16, 12, 30, 40, 500), CU::DAYS(), 1], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 16, 12, 30, 40, 501), CU::DAYS(), 1], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 17, 12, 30, 40, 499), CU::DAYS(), 1], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 17, 12, 30, 40, 500), CU::DAYS(), 2], [$this->dt(2000, 1, 15, 12, 30, 40, 500), $this->dt(2000, 1, 17, 12, 30, 40, 501), CU::DAYS(), 2]];
 }
コード例 #9
0
 public function provider_reducedWithChrono()
 {
     $baseYear = LocalDate::of(2000, 1, 1);
     return [[IsoChronology::INSTANCE()->dateFrom($baseYear)], [IsoChronology::INSTANCE()->dateFrom($baseYear)->plus(1, ChronoUnit::YEARS())], [IsoChronology::INSTANCE()->dateFrom($baseYear)->plus(99, ChronoUnit::YEARS())], [MinguoChronology::INSTANCE()->dateFrom($baseYear)], [MinguoChronology::INSTANCE()->dateFrom($baseYear)->plus(1, ChronoUnit::YEARS())], [MinguoChronology::INSTANCE()->dateFrom($baseYear)->plus(99, ChronoUnit::YEARS())], [ThaiBuddhistChronology::INSTANCE()->dateFrom($baseYear)], [ThaiBuddhistChronology::INSTANCE()->dateFrom($baseYear)->plus(1, ChronoUnit::YEARS())], [ThaiBuddhistChronology::INSTANCE()->dateFrom($baseYear)->plus(99, ChronoUnit::YEARS())]];
 }
コード例 #10
0
 public function rangeRefinedBy(TemporalAccessor $temporal)
 {
     if ($this->rangeUnit == ChronoUnit::WEEKS()) {
         // day-of-week
         return $this->range;
     } else {
         if ($this->rangeUnit == ChronoUnit::MONTHS()) {
             // week-of-month
             return $this->rangeByWeek($temporal, CF::DAY_OF_MONTH());
         } else {
             if ($this->rangeUnit == ChronoUnit::YEARS()) {
                 // week-of-year
                 return $this->rangeByWeek($temporal, CF::DAY_OF_YEAR());
             } else {
                 if ($this->rangeUnit == IsoFields::WEEK_BASED_YEARS()) {
                     return $this->rangeWeekOfWeekBasedYear($temporal);
                 } else {
                     if ($this->rangeUnit == ChronoUnit::FOREVER()) {
                         return CF::YEAR()->range();
                     } else {
                         throw new IllegalStateException("unreachable, rangeUnit: " . $this->rangeUnit . ", this: " . $this);
                     }
                 }
             }
         }
     }
 }
コード例 #11
0
ファイル: TCKYearTest.php プロジェクト: celest-time/prototype
 /**
  * @expectedException     \Celest\DateTimeException
  */
 public function test_until_invalidType()
 {
     $start = Year::of(2010);
     $start->until(LocalTime::of(11, 30), ChronoUnit::YEARS());
 }
コード例 #12
0
 function data_truncatedToInvalid()
 {
     return [[LocalTime::of(1, 2, 3, 123456789), new NINETY_FIVE_MINS()], [LocalTime::of(1, 2, 3, 123456789), CU::WEEKS()], [LocalTime::of(1, 2, 3, 123456789), CU::MONTHS()], [LocalTime::of(1, 2, 3, 123456789), CU::YEARS()]];
 }
コード例 #13
0
 function data_badPlusTemporalAmount()
 {
     return [[MockSimplePeriod::of(2, CU::YEARS())], [MockSimplePeriod::of(2, CU::MONTHS())]];
 }
コード例 #14
0
 public function until(Temporal $endExclusive, TemporalUnit $unit)
 {
     $end = $this->getChronology()->dateFrom($endExclusive);
     if ($unit instanceof ChronoUnit) {
         switch ($unit) {
             case CU::DAYS():
                 return $this->daysUntil($end);
             case CU::WEEKS():
                 return $this->daysUntil($end) / 7;
             case CU::MONTHS():
                 return $this->monthsUntil($end);
             case CU::YEARS():
                 return $this->monthsUntil($end) / 12;
             case CU::DECADES():
                 return $this->monthsUntil($end) / 120;
             case CU::CENTURIES():
                 return $this->monthsUntil($end) / 1200;
             case CU::MILLENNIA():
                 return $this->monthsUntil($end) / 12000;
             case CU::ERAS():
                 return $end->getLong(CF::ERA()) - $this->getLong(CF::ERA());
         }
         throw new UnsupportedTemporalTypeException("Unsupported unit: " . $unit);
     }
     return $unit->between($this, $end);
 }
コード例 #15
0
 public function getRangeUnit()
 {
     return ChronoUnit::YEARS();
 }
コード例 #16
0
 function data_periodUntilUnit()
 {
     return [[$this->ym(2000, 1), $this->ym(-1, 12), CU::MONTHS(), -2000 * 12 - 1], [$this->ym(2000, 1), $this->ym(0, 1), CU::MONTHS(), -2000 * 12], [$this->ym(2000, 1), $this->ym(0, 12), CU::MONTHS(), -1999 * 12 - 1], [$this->ym(2000, 1), $this->ym(1, 1), CU::MONTHS(), -1999 * 12], [$this->ym(2000, 1), $this->ym(1999, 12), CU::MONTHS(), -1], [$this->ym(2000, 1), $this->ym(2000, 1), CU::MONTHS(), 0], [$this->ym(2000, 1), $this->ym(2000, 2), CU::MONTHS(), 1], [$this->ym(2000, 1), $this->ym(2000, 3), CU::MONTHS(), 2], [$this->ym(2000, 1), $this->ym(2000, 12), CU::MONTHS(), 11], [$this->ym(2000, 1), $this->ym(2001, 1), CU::MONTHS(), 12], [$this->ym(2000, 1), $this->ym(2246, 5), CU::MONTHS(), 246 * 12 + 4], [$this->ym(2000, 1), $this->ym(-1, 12), CU::YEARS(), -2000], [$this->ym(2000, 1), $this->ym(0, 1), CU::YEARS(), -2000], [$this->ym(2000, 1), $this->ym(0, 12), CU::YEARS(), -1999], [$this->ym(2000, 1), $this->ym(1, 1), CU::YEARS(), -1999], [$this->ym(2000, 1), $this->ym(1998, 12), CU::YEARS(), -1], [$this->ym(2000, 1), $this->ym(1999, 1), CU::YEARS(), -1], [$this->ym(2000, 1), $this->ym(1999, 2), CU::YEARS(), 0], [$this->ym(2000, 1), $this->ym(1999, 12), CU::YEARS(), 0], [$this->ym(2000, 1), $this->ym(2000, 1), CU::YEARS(), 0], [$this->ym(2000, 1), $this->ym(2000, 2), CU::YEARS(), 0], [$this->ym(2000, 1), $this->ym(2000, 12), CU::YEARS(), 0], [$this->ym(2000, 1), $this->ym(2001, 1), CU::YEARS(), 1], [$this->ym(2000, 1), $this->ym(2246, 5), CU::YEARS(), 246], [$this->ym(2000, 5), $this->ym(-1, 5), CU::DECADES(), -200], [$this->ym(2000, 5), $this->ym(0, 4), CU::DECADES(), -200], [$this->ym(2000, 5), $this->ym(0, 5), CU::DECADES(), -200], [$this->ym(2000, 5), $this->ym(0, 6), CU::DECADES(), -199], [$this->ym(2000, 5), $this->ym(1, 5), CU::DECADES(), -199], [$this->ym(2000, 5), $this->ym(1990, 4), CU::DECADES(), -1], [$this->ym(2000, 5), $this->ym(1990, 5), CU::DECADES(), -1], [$this->ym(2000, 5), $this->ym(1990, 6), CU::DECADES(), 0], [$this->ym(2000, 5), $this->ym(2000, 4), CU::DECADES(), 0], [$this->ym(2000, 5), $this->ym(2000, 5), CU::DECADES(), 0], [$this->ym(2000, 5), $this->ym(2000, 6), CU::DECADES(), 0], [$this->ym(2000, 5), $this->ym(2010, 4), CU::DECADES(), 0], [$this->ym(2000, 5), $this->ym(2010, 5), CU::DECADES(), 1], [$this->ym(2000, 5), $this->ym(2010, 6), CU::DECADES(), 1], [$this->ym(2000, 5), $this->ym(-1, 5), CU::CENTURIES(), -20], [$this->ym(2000, 5), $this->ym(0, 4), CU::CENTURIES(), -20], [$this->ym(2000, 5), $this->ym(0, 5), CU::CENTURIES(), -20], [$this->ym(2000, 5), $this->ym(0, 6), CU::CENTURIES(), -19], [$this->ym(2000, 5), $this->ym(1, 5), CU::CENTURIES(), -19], [$this->ym(2000, 5), $this->ym(1900, 4), CU::CENTURIES(), -1], [$this->ym(2000, 5), $this->ym(1900, 5), CU::CENTURIES(), -1], [$this->ym(2000, 5), $this->ym(1900, 6), CU::CENTURIES(), 0], [$this->ym(2000, 5), $this->ym(2000, 4), CU::CENTURIES(), 0], [$this->ym(2000, 5), $this->ym(2000, 5), CU::CENTURIES(), 0], [$this->ym(2000, 5), $this->ym(2000, 6), CU::CENTURIES(), 0], [$this->ym(2000, 5), $this->ym(2100, 4), CU::CENTURIES(), 0], [$this->ym(2000, 5), $this->ym(2100, 5), CU::CENTURIES(), 1], [$this->ym(2000, 5), $this->ym(2100, 6), CU::CENTURIES(), 1], [$this->ym(2000, 5), $this->ym(-1, 5), CU::MILLENNIA(), -2], [$this->ym(2000, 5), $this->ym(0, 4), CU::MILLENNIA(), -2], [$this->ym(2000, 5), $this->ym(0, 5), CU::MILLENNIA(), -2], [$this->ym(2000, 5), $this->ym(0, 6), CU::MILLENNIA(), -1], [$this->ym(2000, 5), $this->ym(1, 5), CU::MILLENNIA(), -1], [$this->ym(2000, 5), $this->ym(1000, 4), CU::MILLENNIA(), -1], [$this->ym(2000, 5), $this->ym(1000, 5), CU::MILLENNIA(), -1], [$this->ym(2000, 5), $this->ym(1000, 6), CU::MILLENNIA(), 0], [$this->ym(2000, 5), $this->ym(2000, 4), CU::MILLENNIA(), 0], [$this->ym(2000, 5), $this->ym(2000, 5), CU::MILLENNIA(), 0], [$this->ym(2000, 5), $this->ym(2000, 6), CU::MILLENNIA(), 0], [$this->ym(2000, 5), $this->ym(3000, 4), CU::MILLENNIA(), 0], [$this->ym(2000, 5), $this->ym(3000, 5), CU::MILLENNIA(), 1], [$this->ym(2000, 5), $this->ym(3000, 5), CU::MILLENNIA(), 1]];
 }
コード例 #17
0
 function data_goodTemporalUnit()
 {
     return [[2, CU::DAYS()], [2, CU::MONTHS()], [2, CU::YEARS()]];
 }
コード例 #18
0
 public function test_isSupported_TemporalUnit()
 {
     // TODO $this->assertEquals($this->TEST_DATE_TIME->isUnitSupported(null), false);
     $this->assertEquals($this->TEST_DATE_TIME->isUnitSupported(CU::NANOS()), true);
     $this->assertEquals($this->TEST_DATE_TIME->isUnitSupported(CU::MICROS()), true);
     $this->assertEquals($this->TEST_DATE_TIME->isUnitSupported(CU::MILLIS()), true);
     $this->assertEquals($this->TEST_DATE_TIME->isUnitSupported(CU::SECONDS()), true);
     $this->assertEquals($this->TEST_DATE_TIME->isUnitSupported(CU::MINUTES()), true);
     $this->assertEquals($this->TEST_DATE_TIME->isUnitSupported(CU::HOURS()), true);
     $this->assertEquals($this->TEST_DATE_TIME->isUnitSupported(CU::HALF_DAYS()), true);
     $this->assertEquals($this->TEST_DATE_TIME->isUnitSupported(CU::DAYS()), true);
     $this->assertEquals($this->TEST_DATE_TIME->isUnitSupported(CU::WEEKS()), true);
     $this->assertEquals($this->TEST_DATE_TIME->isUnitSupported(CU::MONTHS()), true);
     $this->assertEquals($this->TEST_DATE_TIME->isUnitSupported(CU::YEARS()), true);
     $this->assertEquals($this->TEST_DATE_TIME->isUnitSupported(CU::DECADES()), true);
     $this->assertEquals($this->TEST_DATE_TIME->isUnitSupported(CU::CENTURIES()), true);
     $this->assertEquals($this->TEST_DATE_TIME->isUnitSupported(CU::MILLENNIA()), true);
     $this->assertEquals($this->TEST_DATE_TIME->isUnitSupported(CU::ERAS()), true);
     $this->assertEquals($this->TEST_DATE_TIME->isUnitSupported(CU::FOREVER()), false);
 }
コード例 #19
0
 function data_periodUntilUnit()
 {
     return [[$this->date(2000, 1, 1), $this->date(2000, 1, 1), CU::DAYS(), 0], [$this->date(2000, 1, 1), $this->date(2000, 1, 1), CU::WEEKS(), 0], [$this->date(2000, 1, 1), $this->date(2000, 1, 1), CU::MONTHS(), 0], [$this->date(2000, 1, 1), $this->date(2000, 1, 1), CU::YEARS(), 0], [$this->date(2000, 1, 1), $this->date(2000, 1, 1), CU::DECADES(), 0], [$this->date(2000, 1, 1), $this->date(2000, 1, 1), CU::CENTURIES(), 0], [$this->date(2000, 1, 1), $this->date(2000, 1, 1), CU::MILLENNIA(), 0], [$this->date(2000, 1, 15), $this->date(2000, 2, 14), CU::DAYS(), 30], [$this->date(2000, 1, 15), $this->date(2000, 2, 15), CU::DAYS(), 31], [$this->date(2000, 1, 15), $this->date(2000, 2, 16), CU::DAYS(), 32], [$this->date(2000, 1, 15), $this->date(2000, 2, 17), CU::WEEKS(), 4], [$this->date(2000, 1, 15), $this->date(2000, 2, 18), CU::WEEKS(), 4], [$this->date(2000, 1, 15), $this->date(2000, 2, 19), CU::WEEKS(), 5], [$this->date(2000, 1, 15), $this->date(2000, 2, 20), CU::WEEKS(), 5], [$this->date(2000, 1, 15), $this->date(2000, 2, 14), CU::MONTHS(), 0], [$this->date(2000, 1, 15), $this->date(2000, 2, 15), CU::MONTHS(), 1], [$this->date(2000, 1, 15), $this->date(2000, 2, 16), CU::MONTHS(), 1], [$this->date(2000, 1, 15), $this->date(2000, 3, 14), CU::MONTHS(), 1], [$this->date(2000, 1, 15), $this->date(2000, 3, 15), CU::MONTHS(), 2], [$this->date(2000, 1, 15), $this->date(2000, 3, 16), CU::MONTHS(), 2], [$this->date(2000, 1, 15), $this->date(2001, 1, 14), CU::YEARS(), 0], [$this->date(2000, 1, 15), $this->date(2001, 1, 15), CU::YEARS(), 1], [$this->date(2000, 1, 15), $this->date(2001, 1, 16), CU::YEARS(), 1], [$this->date(2000, 1, 15), $this->date(2004, 1, 14), CU::YEARS(), 3], [$this->date(2000, 1, 15), $this->date(2004, 1, 15), CU::YEARS(), 4], [$this->date(2000, 1, 15), $this->date(2004, 1, 16), CU::YEARS(), 4], [$this->date(2000, 1, 15), $this->date(2010, 1, 14), CU::DECADES(), 0], [$this->date(2000, 1, 15), $this->date(2010, 1, 15), CU::DECADES(), 1], [$this->date(2000, 1, 15), $this->date(2100, 1, 14), CU::CENTURIES(), 0], [$this->date(2000, 1, 15), $this->date(2100, 1, 15), CU::CENTURIES(), 1], [$this->date(2000, 1, 15), $this->date(3000, 1, 14), CU::MILLENNIA(), 0], [$this->date(2000, 1, 15), $this->date(3000, 1, 15), CU::MILLENNIA(), 1]];
 }
コード例 #20
0
ファイル: ChronoField.php プロジェクト: celest-time/prototype
 public static function init()
 {
     self::$NANO_OF_SECOND = new ChronoField(0, "NanoOfSecond", ChronoUnit::NANOS(), ChronoUnit::SECONDS(), ValueRange::of(0, 999999999));
     self::$NANO_OF_DAY = new ChronoField(1, "NanoOfDay", ChronoUnit::NANOS(), ChronoUnit::DAYS(), ValueRange::of(0, 86400 * 1000000000 - 1));
     self::$MICRO_OF_SECOND = new ChronoField(2, "MicroOfSecond", ChronoUnit::MICROS(), ChronoUnit::SECONDS(), ValueRange::of(0, 999999));
     self::$MICRO_OF_DAY = new ChronoField(3, "MicroOfDay", ChronoUnit::MICROS(), ChronoUnit::DAYS(), ValueRange::of(0, 86400 * 1000000 - 1));
     self::$MILLI_OF_SECOND = new ChronoField(4, "MilliOfSecond", ChronoUnit::MILLIS(), ChronoUnit::SECONDS(), ValueRange::of(0, 999));
     self::$MILLI_OF_DAY = new ChronoField(5, "MilliOfDay", ChronoUnit::MILLIS(), ChronoUnit::DAYS(), ValueRange::of(0, 86400 * 1000 - 1));
     self::$SECOND_OF_MINUTE = new ChronoField(6, "SecondOfMinute", ChronoUnit::SECONDS(), ChronoUnit::MINUTES(), ValueRange::of(0, 59), "second");
     self::$SECOND_OF_DAY = new ChronoField(7, "SecondOfDay", ChronoUnit::SECONDS(), ChronoUnit::DAYS(), ValueRange::of(0, 86400 - 1));
     self::$MINUTE_OF_HOUR = new ChronoField(8, "MinuteOfHour", ChronoUnit::MINUTES(), ChronoUnit::HOURS(), ValueRange::of(0, 59), "minute");
     self::$MINUTE_OF_DAY = new ChronoField(9, "MinuteOfDay", ChronoUnit::MINUTES(), ChronoUnit::DAYS(), ValueRange::of(0, 24 * 60 - 1));
     self::$HOUR_OF_AMPM = new ChronoField(10, "HourOfAmPm", ChronoUnit::HOURS(), ChronoUnit::HALF_DAYS(), ValueRange::of(0, 11));
     self::$CLOCK_HOUR_OF_AMPM = new ChronoField(11, "ClockHourOfAmPm", ChronoUnit::HOURS(), ChronoUnit::HALF_DAYS(), ValueRange::of(1, 12));
     self::$HOUR_OF_DAY = new ChronoField(12, "HourOfDay", ChronoUnit::HOURS(), ChronoUnit::DAYS(), ValueRange::of(0, 23), "hour");
     self::$CLOCK_HOUR_OF_DAY = new ChronoField(13, "ClockHourOfDay", ChronoUnit::HOURS(), ChronoUnit::DAYS(), ValueRange::of(1, 24));
     self::$AMPM_OF_DAY = new ChronoField(14, "AmPmOfDay", ChronoUnit::HALF_DAYS(), ChronoUnit::DAYS(), ValueRange::of(0, 1), "dayperiod");
     self::$DAY_OF_WEEK = new ChronoField(15, "DayOfWeek", ChronoUnit::DAYS(), ChronoUnit::WEEKS(), ValueRange::of(1, 7), "weekday");
     self::$ALIGNED_DAY_OF_WEEK_IN_MONTH = new ChronoField(16, "AlignedDayOfWeekInMonth", ChronoUnit::DAYS(), ChronoUnit::WEEKS(), ValueRange::of(1, 7));
     self::$ALIGNED_DAY_OF_WEEK_IN_YEAR = new ChronoField(17, "AlignedDayOfWeekInYear", ChronoUnit::DAYS(), ChronoUnit::WEEKS(), ValueRange::of(1, 7));
     self::$DAY_OF_MONTH = new ChronoField(18, "DayOfMonth", ChronoUnit::DAYS(), ChronoUnit::MONTHS(), ValueRange::ofVariable(1, 28, 31), "day");
     self::$DAY_OF_YEAR = new ChronoField(19, "DayOfYear", ChronoUnit::DAYS(), ChronoUnit::YEARS(), ValueRange::ofVariable(1, 365, 366));
     self::$EPOCH_DAY = new ChronoField(20, "EpochDay", ChronoUnit::DAYS(), ChronoUnit::FOREVER(), ValueRange::of(Year::MIN_VALUE * 365.25, Year::MAX_VALUE * 365.25));
     self::$ALIGNED_WEEK_OF_MONTH = new ChronoField(21, "AlignedWeekOfMonth", ChronoUnit::WEEKS(), ChronoUnit::MONTHS(), ValueRange::ofVariable(1, 4, 5));
     self::$ALIGNED_WEEK_OF_YEAR = new ChronoField(22, "AlignedWeekOfYear", ChronoUnit::WEEKS(), ChronoUnit::YEARS(), ValueRange::of(1, 53));
     self::$MONTH_OF_YEAR = new ChronoField(23, "MonthOfYear", ChronoUnit::MONTHS(), ChronoUnit::YEARS(), ValueRange::of(1, 12), "month");
     self::$PROLEPTIC_MONTH = new ChronoField(24, "ProlepticMonth", ChronoUnit::MONTHS(), ChronoUnit::FOREVER(), ValueRange::of(Year::MIN_VALUE * 12, Year::MAX_VALUE * 12 + 11));
     self::$YEAR_OF_ERA = new ChronoField(25, "YearOfEra", ChronoUnit::YEARS(), ChronoUnit::FOREVER(), ValueRange::ofVariable(1, Year::MAX_VALUE, Year::MAX_VALUE + 1));
     self::$YEAR = new ChronoField(26, "Year", ChronoUnit::YEARS(), ChronoUnit::FOREVER(), ValueRange::of(Year::MIN_VALUE, Year::MAX_VALUE), "year");
     self::$ERA = new ChronoField(27, "Era", ChronoUnit::ERAS(), ChronoUnit::FOREVER(), ValueRange::of(0, 1), "era");
     self::$INSTANT_SECONDS = new ChronoField(28, "InstantSeconds", ChronoUnit::SECONDS(), ChronoUnit::FOREVER(), ValueRange::of(Long::MIN_VALUE, Long::MAX_VALUE));
     self::$OFFSET_SECONDS = new ChronoField(29, "OffsetSeconds", ChronoUnit::SECONDS(), ChronoUnit::FOREVER(), ValueRange::of(-18 * 3600, 18 * 3600));
 }
コード例 #21
0
ファイル: Period.php プロジェクト: celest-time/prototype
 /**
  * Subtracts this period from the specified temporal object.
  * <p>
  * This returns a temporal object of the same observable type as the input
  * with this period subtracted.
  * If the temporal has a chronology, it must be the ISO chronology.
  * <p>
  * In most cases, it is clearer to reverse the calling pattern by using
  * {@link Temporal#minus(TemporalAmount)}.
  * <pre>
  *   // these two lines are equivalent, but the second approach is recommended
  *   dateTime = thisPeriod.subtractFrom(dateTime);
  *   dateTime = dateTime.minus(thisPeriod);
  * </pre>
  * <p>
  * The calculation operates as follows.
  * First, the chronology of the temporal is checked to ensure it is ISO chronology or null.
  * Second, if the months are zero, the years are subtracted if non-zero, otherwise
  * the combination of years and months is subtracted if non-zero.
  * Finally, any days are subtracted.
  * <p>
  * This approach ensures that a partial period can be subtracted from a partial date.
  * For example, a period of years and/or months can be subtracted from a {@code YearMonth},
  * but a period including days cannot.
  * The approach also subtracts years and months together when necessary, which ensures
  * correct behaviour at the end of the month.
  * <p>
  * This instance is immutable and unaffected by this method call.
  *
  * @param Temporal $temporal the temporal object to adjust, not null
  * @return Temporal an object of the same type with the adjustment made, not null
  * @throws DateTimeException if unable to subtract
  * @throws ArithmeticException if numeric overflow occurs
  */
 public function subtractFrom(Temporal $temporal)
 {
     $this->validateChrono($temporal);
     if ($this->months == 0) {
         if ($this->years != 0) {
             $temporal = $temporal->minus($this->years, ChronoUnit::YEARS());
         }
     } else {
         $totalMonths = $this->toTotalMonths();
         if ($totalMonths != 0) {
             $temporal = $temporal->minus($totalMonths, ChronoUnit::MONTHS());
         }
     }
     if ($this->days != 0) {
         $temporal = $temporal->minus($this->days, ChronoUnit::DAYS());
     }
     return $temporal;
 }