//UserID has to be set at minimum
if ($punch_control_id != '') {
Debug::Text(' Punch Control ID was passed: ' . $punch_control_id, __FILE__, __LINE__, __METHOD__, 10);
//Get previous punch, and default timestamp to that.
$plf = new PunchListFactory();
$plf->getPreviousPunchByPunchControlID($punch_control_id);
if ($plf->getRecordCount() > 0) {
$prev_punch_obj = $plf->getCurrent();
$time_stamp = $prev_punch_obj->getTimeStamp() + 3600;
$date_stamp = $prev_punch_obj->getTimeStamp();
//Match date with previous punch as well, incase a new day hasnt been triggered yet.
} else {
$time_stamp = TTDate::getTime();
$date_stamp = NULL;
}
$pclf = new PunchControlListFactory();
$pclf->getById($punch_control_id);
if ($pclf->getRecordCount() > 0) {
$pc_obj = $pclf->getCurrent();
if ($date_stamp == NULL) {
$date_stamp = $pc_obj->getUserDateObject()->getDateStamp();
}
$pc_data = array('id' => $pc_obj->getId(), 'user_id' => $pc_obj->getUserDateObject()->getUser(), 'user_full_name' => $pc_obj->getUserDateObject()->getUserObject()->getFullName(), 'date_stamp' => $date_stamp, 'user_date_id' => $pc_obj->getUserDateObject()->getId(), 'time_stamp' => $time_stamp, 'branch_id' => $pc_obj->getBranch(), 'department_id' => $pc_obj->getDepartment(), 'job_id' => $pc_obj->getJob(), 'job_item_id' => $pc_obj->getJobItem(), 'quantity' => (double) $pc_obj->getQuantity(), 'bad_quantity' => (double) $pc_obj->getBadQuantity(), 'note' => $pc_obj->getNote(), 'other_id1' => $pc_obj->getOtherID1(), 'other_id2' => $pc_obj->getOtherID2(), 'other_id3' => $pc_obj->getOtherID3(), 'other_id4' => $pc_obj->getOtherID4(), 'other_id5' => $pc_obj->getOtherID5(), 'status_id' => $status_id);
}
} elseif ($user_id != '') {
Debug::Text(' User ID was passed: ' . $user_id . ' Date Stamp: ' . $date_stamp, __FILE__, __LINE__, __METHOD__, 10);
//Don't guess too much. If they click a day to add a punch. Make sure that punch is on that day.
if (isset($date_stamp) and $date_stamp != '') {
$time_stamp = $date_stamp + 3600 * 12;
//Noon
} else {
function roundTimeStamp($epoch)
{
$original_epoch = $epoch;
Debug::text(' Rounding Timestamp: ' . TTDate::getDate('DATE+TIME', $epoch) . ' Status ID: ' . $this->getStatus() . ' Type ID: ' . $this->getType(), __FILE__, __LINE__, __METHOD__, 10);
/*
//Punch control is no longer used for rounding.
if ( !is_object( $this->getPunchControlObject() ) ) {
return FALSE;
}
*/
//Check for rounding policies.
$riplf = new RoundIntervalPolicyListFactory();
$type_id = $riplf->getPunchTypeFromPunchStatusAndType($this->getStatus(), $this->getType());
Debug::text(' Round Interval Punch Type: ' . $type_id . ' User: '******' Found Rounding Policy: ' . $round_policy_obj->getId() . ' Punch Type: ' . $round_policy_obj->getPunchType(), __FILE__, __LINE__, __METHOD__, 10);
//FIXME: It will only do proper total rounding if they edit the Lunch Out punch.
//We need to account for cases when they edit just the Lunch In Punch.
if ($round_policy_obj->getPunchType() == 100) {
Debug::text('Lunch Total Rounding: ' . TTDate::getDate('DATE+TIME', $epoch), __FILE__, __LINE__, __METHOD__, 10);
//On Lunch Punch In (back from lunch) do the total rounding.
if ($this->getStatus() == 10 and $this->getType() == 20) {
Debug::text('bLunch Total Rounding: ' . TTDate::getDate('DATE+TIME', $epoch), __FILE__, __LINE__, __METHOD__, 10);
//If strict is set, round to scheduled lunch time?
//Find Lunch Punch In.
$plf = new PunchListFactory();
//$plf->getPreviousPunchByUserDateIdAndStatusAndTypeAndEpoch( $this->getPunchControlObject()->getUserDateID(), 20, 20, $epoch );
$plf->getPreviousPunchByUserIdAndStatusAndTypeAndEpoch($this->getUser(), 20, 20, $epoch);
if ($plf->getRecordCount() == 1) {
Debug::text('Found Lunch Punch Out: ' . TTDate::getDate('DATE+TIME', $plf->getCurrent()->getTimeStamp()), __FILE__, __LINE__, __METHOD__, 10);
$total_lunch_time = $epoch - $plf->getCurrent()->getTimeStamp();
Debug::text('Total Lunch Time: ' . $total_lunch_time, __FILE__, __LINE__, __METHOD__, 10);
//Set the ScheduleID
$has_schedule = $this->setScheduleID($this->findScheduleID($epoch));
if ($has_schedule == TRUE and $round_policy_obj->getGrace() > 0 and is_object($this->getScheduleObject()->getSchedulePolicyObject()) and is_object($this->getScheduleObject()->getSchedulePolicyObject()->getMealPolicyObject())) {
Debug::text(' Applying Grace Period: ', __FILE__, __LINE__, __METHOD__, 10);
$total_lunch_time = TTDate::graceTime($total_lunch_time, $round_policy_obj->getGrace(), $this->getScheduleObject()->getSchedulePolicyObject()->getMealPolicyObject()->getAmount());
Debug::text('After Grace: ' . $total_lunch_time, __FILE__, __LINE__, __METHOD__, 10);
}
if ($round_policy_obj->getInterval() > 0) {
Debug::Text(' Rounding to interval: ' . $round_policy_obj->getInterval(), __FILE__, __LINE__, __METHOD__, 10);
$total_lunch_time = TTDate::roundTime($total_lunch_time, $round_policy_obj->getInterval(), $round_policy_obj->getRoundType(), $round_policy_obj->getGrace());
Debug::text('After Rounding: ' . $total_lunch_time, __FILE__, __LINE__, __METHOD__, 10);
}
if ($has_schedule == TRUE and $round_policy_obj->getStrict() == TRUE and is_object($this->getScheduleObject()->getSchedulePolicyObject()) and is_object($this->getScheduleObject()->getSchedulePolicyObject()->getMealPolicyObject())) {
Debug::Text(' Snap Time: Round Type: ' . $round_policy_obj->getRoundType(), __FILE__, __LINE__, __METHOD__, 10);
if ($round_policy_obj->getRoundType() == 10) {
Debug::Text(' Snap Time DOWN ', __FILE__, __LINE__, __METHOD__, 10);
$total_lunch_time = TTDate::snapTime($total_lunch_time, $this->getScheduleObject()->getSchedulePolicyObject()->getMealPolicyObject()->getAmount(), 'DOWN');
} elseif ($round_policy_obj->getRoundType() == 30) {
Debug::Text(' Snap Time UP', __FILE__, __LINE__, __METHOD__, 10);
$total_lunch_time = TTDate::snapTime($total_lunch_time, $this->getScheduleObject()->getSchedulePolicyObject()->getMealPolicyObject()->getAmount(), 'UP');
} else {
Debug::Text(' Not Snaping Time', __FILE__, __LINE__, __METHOD__, 10);
}
}
$epoch = $plf->getCurrent()->getTimeStamp() + $total_lunch_time;
Debug::text('Epoch after total rounding is: ' . $epoch . ' - ' . TTDate::getDate('DATE+TIME', $epoch), __FILE__, __LINE__, __METHOD__, 10);
} else {
Debug::text('DID NOT Find Lunch Punch Out: ' . TTDate::getDate('DATE+TIME', $plf->getCurrent()->getTimeStamp()), __FILE__, __LINE__, __METHOD__, 10);
}
} else {
Debug::text('Skipping Lunch Total Rounding: ' . TTDate::getDate('DATE+TIME', $epoch), __FILE__, __LINE__, __METHOD__, 10);
}
} elseif ($round_policy_obj->getPunchType() == 110) {
//Break Total
Debug::text('break Total Rounding: ' . TTDate::getDate('DATE+TIME', $epoch), __FILE__, __LINE__, __METHOD__, 10);
//On break Punch In (back from break) do the total rounding.
if ($this->getStatus() == 10 and $this->getType() == 30) {
Debug::text('bbreak Total Rounding: ' . TTDate::getDate('DATE+TIME', $epoch), __FILE__, __LINE__, __METHOD__, 10);
//If strict is set, round to scheduled break time?
//Find break Punch In.
$plf = new PunchListFactory();
//$plf->getPreviousPunchByUserDateIdAndStatusAndTypeAndEpoch( $this->getPunchControlObject()->getUserDateID(), 20, 30, $epoch );
$plf->getPreviousPunchByUserIdAndStatusAndTypeAndEpoch($this->getUser(), 20, 30, $epoch);
if ($plf->getRecordCount() == 1) {
Debug::text('Found break Punch Out: ' . TTDate::getDate('DATE+TIME', $plf->getCurrent()->getTimeStamp()), __FILE__, __LINE__, __METHOD__, 10);
$total_break_time = $epoch - $plf->getCurrent()->getTimeStamp();
Debug::text('Total break Time: ' . $total_break_time, __FILE__, __LINE__, __METHOD__, 10);
//Set the ScheduleID
$has_schedule = $this->setScheduleID($this->findScheduleID($epoch));
if ($has_schedule == TRUE and $round_policy_obj->getGrace() > 0 and is_object($this->getScheduleObject()->getSchedulePolicyObject()) and is_object($this->getScheduleObject()->getSchedulePolicyObject()->getMealPolicyObject())) {
Debug::text(' Applying Grace Period: ', __FILE__, __LINE__, __METHOD__, 10);
$total_break_time = TTDate::graceTime($total_break_time, $round_policy_obj->getGrace(), $this->getScheduleObject()->getSchedulePolicyObject()->getMealPolicyObject()->getAmount());
Debug::text('After Grace: ' . $total_break_time, __FILE__, __LINE__, __METHOD__, 10);
}
if ($round_policy_obj->getInterval() > 0) {
Debug::Text(' Rounding to interval: ' . $round_policy_obj->getInterval(), __FILE__, __LINE__, __METHOD__, 10);
$total_break_time = TTDate::roundTime($total_break_time, $round_policy_obj->getInterval(), $round_policy_obj->getRoundType(), $round_policy_obj->getGrace());
Debug::text('After Rounding: ' . $total_break_time, __FILE__, __LINE__, __METHOD__, 10);
}
if ($has_schedule == TRUE and $round_policy_obj->getStrict() == TRUE and is_object($this->getScheduleObject()->getSchedulePolicyObject()) and is_object($this->getScheduleObject()->getSchedulePolicyObject()->getMealPolicyObject())) {
Debug::Text(' Snap Time: Round Type: ' . $round_policy_obj->getRoundType(), __FILE__, __LINE__, __METHOD__, 10);
if ($round_policy_obj->getRoundType() == 10) {
Debug::Text(' Snap Time DOWN ', __FILE__, __LINE__, __METHOD__, 10);
$total_break_time = TTDate::snapTime($total_break_time, $this->getScheduleObject()->getSchedulePolicyObject()->getMealPolicyObject()->getAmount(), 'DOWN');
} elseif ($round_policy_obj->getRoundType() == 30) {
Debug::Text(' Snap Time UP', __FILE__, __LINE__, __METHOD__, 10);
$total_break_time = TTDate::snapTime($total_break_time, $this->getScheduleObject()->getSchedulePolicyObject()->getMealPolicyObject()->getAmount(), 'UP');
} else {
Debug::Text(' Not Snaping Time', __FILE__, __LINE__, __METHOD__, 10);
}
}
$epoch = $plf->getCurrent()->getTimeStamp() + $total_break_time;
Debug::text('Epoch after total rounding is: ' . $epoch . ' - ' . TTDate::getDate('DATE+TIME', $epoch), __FILE__, __LINE__, __METHOD__, 10);
} else {
Debug::text('DID NOT Find break Punch Out: ' . TTDate::getDate('DATE+TIME', $plf->getCurrent()->getTimeStamp()), __FILE__, __LINE__, __METHOD__, 10);
}
} else {
Debug::text('Skipping break Total Rounding: ' . TTDate::getDate('DATE+TIME', $epoch), __FILE__, __LINE__, __METHOD__, 10);
}
} elseif ($round_policy_obj->getPunchType() == 120) {
//Day Total Rounding
Debug::text('Day Total Rounding: ' . TTDate::getDate('DATE+TIME', $epoch), __FILE__, __LINE__, __METHOD__, 10);
if ($this->getStatus() == 20 and $this->getType() == 10) {
//Out, Type Normal
Debug::text('bDay Total Rounding: ' . TTDate::getDate('DATE+TIME', $epoch), __FILE__, __LINE__, __METHOD__, 10);
//If strict is set, round to scheduled time?
$plf = new PunchListFactory();
$plf->getPreviousPunchByUserIdAndEpochAndNotPunchIDAndMaximumShiftTime($this->getUser(), $epoch, $this->getId());
if ($plf->getRecordCount() == 1) {
Debug::text('Found Previous Punch In: ' . TTDate::getDate('DATE+TIME', $plf->getCurrent()->getTimeStamp()), __FILE__, __LINE__, __METHOD__, 10);
//Get day total time prior to this punch control.
$pclf = new PunchControlListFactory();
$pclf->getByUserDateId($plf->getCurrent()->getPunchControlObject()->getUserDateID());
if ($pclf->getRecordCount() > 0) {
$day_total_time = $epoch - $plf->getCurrent()->getTimeStamp();
Debug::text('aDay Total Time: ' . $day_total_time . ' Current Punch Control ID: ' . $this->getPunchControlID(), __FILE__, __LINE__, __METHOD__, 10);
foreach ($pclf as $pc_obj) {
if ($plf->getCurrent()->getPunchControlID() != $pc_obj->getID()) {
Debug::text('Punch Control Total Time: ' . $pc_obj->getTotalTime() . ' ID: ' . $pc_obj->getId(), __FILE__, __LINE__, __METHOD__, 10);
$day_total_time += $pc_obj->getTotalTime();
}
}
Debug::text('bDay Total Time: ' . $day_total_time, __FILE__, __LINE__, __METHOD__, 10);
$original_day_total_time = $day_total_time;
if ($day_total_time > 0) {
//Set the ScheduleID
$has_schedule = $this->setScheduleID($this->findScheduleID($epoch));
if ($has_schedule == TRUE and $round_policy_obj->getGrace() > 0 and is_object($this->getScheduleObject()->getSchedulePolicyObject()) and is_object($this->getScheduleObject()->getSchedulePolicyObject()->getMealPolicyObject())) {
Debug::text(' Applying Grace Period: ', __FILE__, __LINE__, __METHOD__, 10);
$day_total_time = TTDate::graceTime($day_total_time, $round_policy_obj->getGrace(), $this->getScheduleObject()->getSchedulePolicyObject()->getMealPolicyObject()->getAmount());
Debug::text('After Grace: ' . $day_total_time, __FILE__, __LINE__, __METHOD__, 10);
}
if ($round_policy_obj->getInterval() > 0) {
Debug::Text(' Rounding to interval: ' . $round_policy_obj->getInterval(), __FILE__, __LINE__, __METHOD__, 10);
$day_total_time = TTDate::roundTime($day_total_time, $round_policy_obj->getInterval(), $round_policy_obj->getRoundType(), $round_policy_obj->getGrace());
Debug::text('After Rounding: ' . $day_total_time, __FILE__, __LINE__, __METHOD__, 10);
}
if ($has_schedule == TRUE and $round_policy_obj->getStrict() == TRUE and is_object($this->getScheduleObject()->getSchedulePolicyObject()) and is_object($this->getScheduleObject()->getSchedulePolicyObject()->getMealPolicyObject())) {
Debug::Text(' Snap Time: Round Type: ' . $round_policy_obj->getRoundType(), __FILE__, __LINE__, __METHOD__, 10);
if ($round_policy_obj->getRoundType() == 10) {
Debug::Text(' Snap Time DOWN ', __FILE__, __LINE__, __METHOD__, 10);
$day_total_time = TTDate::snapTime($day_total_time, $this->getScheduleObject()->getTotalTime(), 'DOWN');
} elseif ($round_policy_obj->getRoundType() == 30) {
Debug::Text(' Snap Time UP', __FILE__, __LINE__, __METHOD__, 10);
$day_total_time = TTDate::snapTime($day_total_time, $this->getScheduleObject()->getTotalTime(), 'UP');
} else {
Debug::Text(' Not Snaping Time', __FILE__, __LINE__, __METHOD__, 10);
}
}
Debug::text('cDay Total Time: ' . $day_total_time, __FILE__, __LINE__, __METHOD__, 10);
$day_total_time_diff = $day_total_time - $original_day_total_time;
Debug::text('Day Total Diff: ' . $day_total_time_diff, __FILE__, __LINE__, __METHOD__, 10);
$epoch = $original_epoch + $day_total_time_diff;
}
}
} else {
Debug::text('DID NOT Find Normal Punch Out: ' . TTDate::getDate('DATE+TIME', $plf->getCurrent()->getTimeStamp()), __FILE__, __LINE__, __METHOD__, 10);
}
} else {
Debug::text('Skipping Lunch Total Rounding: ' . TTDate::getDate('DATE+TIME', $epoch), __FILE__, __LINE__, __METHOD__, 10);
}
} else {
Debug::text('NOT Total Rounding: ' . TTDate::getDate('DATE+TIME', $epoch), __FILE__, __LINE__, __METHOD__, 10);
if ($this->inScheduleStartStopWindow($epoch) and $round_policy_obj->getGrace() > 0) {
Debug::text(' Applying Grace Period: ', __FILE__, __LINE__, __METHOD__, 10);
$epoch = TTDate::graceTime($epoch, $round_policy_obj->getGrace(), $this->getScheduleWindowTime());
Debug::text('After Grace: ' . TTDate::getDate('DATE+TIME', $epoch), __FILE__, __LINE__, __METHOD__, 10);
}
$grace_time = $round_policy_obj->getGrace();
//If strict scheduling is enabled, handle grace times differently.
//Only apply them above if we are near the schedule start/stop time.
//This allows for grace time to apply if an employee punches in late,
//but afterwards not apply at all.
if ($round_policy_obj->getStrict() == TRUE) {
$grace_time = 0;
}
if ($round_policy_obj->getInterval() > 0) {
Debug::Text(' Rounding to interval: ' . $round_policy_obj->getInterval(), __FILE__, __LINE__, __METHOD__, 10);
$epoch = TTDate::roundTime($epoch, $round_policy_obj->getInterval(), $round_policy_obj->getRoundType(), $grace_time);
Debug::text('After Rounding: ' . TTDate::getDate('DATE+TIME', $epoch), __FILE__, __LINE__, __METHOD__, 10);
}
//ONLY perform strict rounding on Normal punches, not break/lunch punches?
//Modify the UI to restrict this as well perhaps?
if ($round_policy_obj->getStrict() == TRUE and $this->getScheduleWindowTime() !== FALSE) {
Debug::Text(' Snap Time: Round Type: ' . $round_policy_obj->getRoundType(), __FILE__, __LINE__, __METHOD__, 10);
if ($round_policy_obj->getRoundType() == 10) {
Debug::Text(' Snap Time DOWN ', __FILE__, __LINE__, __METHOD__, 10);
$epoch = TTDate::snapTime($epoch, $this->getScheduleWindowTime(), 'DOWN');
} elseif ($round_policy_obj->getRoundType() == 30) {
Debug::Text(' Snap Time UP', __FILE__, __LINE__, __METHOD__, 10);
$epoch = TTDate::snapTime($epoch, $this->getScheduleWindowTime(), 'UP');
} else {
//If its an In Punch, snap up, if its out punch, snap down?
Debug::Text(' Average rounding type, automatically determining snap direction.', __FILE__, __LINE__, __METHOD__, 10);
if ($this->getStatus() == 10) {
Debug::Text(' Snap Time UP', __FILE__, __LINE__, __METHOD__, 10);
$epoch = TTDate::snapTime($epoch, $this->getScheduleWindowTime(), 'UP');
} else {
Debug::Text(' Snap Time DOWN ', __FILE__, __LINE__, __METHOD__, 10);
$epoch = TTDate::snapTime($epoch, $this->getScheduleWindowTime(), 'DOWN');
}
}
}
}
} else {
Debug::text(' NO Rounding Policy(s) Found', __FILE__, __LINE__, __METHOD__, 10);
}
Debug::text(' Rounded TimeStamp: ' . TTDate::getDate('DATE+TIME', $epoch) . ' Original TimeStamp: ' . TTDate::getDate('DATE+TIME', $original_epoch), __FILE__, __LINE__, __METHOD__, 10);
return $epoch;
}
function calcUserDate()
{
if ($this->getEnableCalcUserDateID() == TRUE) {
Debug::Text(' Calculating User Date ID...', __FILE__, __LINE__, __METHOD__, 10);
$shift_data = $this->getShiftData();
if (is_array($shift_data)) {
$user_date_id = $this->getUserDateID();
//preSave should already be called before running this function.
if (isset($user_date_id) and $user_date_id > 0 and isset($shift_data['punch_control_ids']) and is_array($shift_data['punch_control_ids'])) {
Debug::Text('Assigning all punch_control_ids to User Date ID: ' . $user_date_id, __FILE__, __LINE__, __METHOD__, 10);
$this->old_user_date_ids[] = $user_date_id;
$this->old_user_date_ids[] = $this->getOldUserDateID();
foreach ($shift_data['punch_control_ids'] as $punch_control_id) {
$pclf = new PunchControlListFactory();
$pclf->getById($punch_control_id);
if ($pclf->getRecordCount() == 1) {
$pc_obj = $pclf->getCurrent();
if ($pc_obj->getUserDateID() != $user_date_id) {
Debug::Text(' Saving Punch Control ID: ' . $punch_control_id . ' with new User Date Total ID: ' . $user_date_id, __FILE__, __LINE__, __METHOD__, 10);
$this->old_user_date_ids[] = $pc_obj->getUserDateID();
$pc_obj->setUserDateID($user_date_id);
$pc_obj->setEnableCalcUserDateTotal(TRUE);
$pc_obj->Save();
} else {
Debug::Text(' NOT Saving Punch Control ID, as User Date ID didnt change: ' . $punch_control_id, __FILE__, __LINE__, __METHOD__, 10);
}
}
}
Debug::Arr($this->old_user_date_ids, 'aOld User Date IDs: ', __FILE__, __LINE__, __METHOD__, 10);
return TRUE;
}
}
}
return FALSE;
}
function postSave()
{
$this->removeCache($this->getId());
Debug::Text('Post Save... Deleted: ' . (int) $this->getDeleted(), __FILE__, __LINE__, __METHOD__, 10);
//Delete punch control/schedules assigned to this.
if ($this->getDeleted() == TRUE) {
//Delete schedules assigned to this user date.
//Turn off any re-calc's
$slf = new ScheduleListFactory();
$slf->getByUserDateID($this->getId());
if ($slf->getRecordCount() > 0) {
foreach ($slf as $schedule_obj) {
$schedule_obj->setDeleted(TRUE);
$schedule_obj->Save();
}
}
$pclf = new PunchControlListFactory();
$pclf->getByUserDateID($this->getId());
if ($pclf->getRecordCount() > 0) {
foreach ($pclf as $pc_obj) {
$pc_obj->setDeleted(TRUE);
$pc_obj->Save();
}
}
//Delete user_date_total rows too
$udtlf = new UserDateTotalListFactory();
$udtlf->getByUserDateID($this->getId());
if ($udtlf->getRecordCount() > 0) {
foreach ($udtlf as $udt_obj) {
$udt_obj->setDeleted(TRUE);
$udt_obj->Save();
}
}
}
return TRUE;
}
function setPunchControlID($id)
{
$id = trim($id);
if ($id == '' or empty($id)) {
$id = NULL;
}
$pclf = new PunchControlListFactory();
if ($id == NULL or $this->Validator->isResultSetWithRows('punch_control', $pclf->getByID($id), TTi18n::gettext('Invalid Punch Control ID'))) {
$this->data['punch_control_id'] = $id;
return TRUE;
}
return FALSE;
}
function calcPremiumPolicyTotalTime($udt_meal_policy_adjustment_arr, $udt_break_policy_adjustment_arr, $daily_total_time = FALSE)
{
global $profiler;
$profiler->startTimer("UserDateTotal::calcPremiumPolicyTotalTime() - Part 1");
if ($daily_total_time === FALSE) {
$daily_total_time = $this->getDailyTotalTime();
}
$pplf = new PremiumPolicyListFactory();
$pplf->getByPolicyGroupUserId($this->getUserDateObject()->getUser());
if ($pplf->getRecordCount() > 0) {
Debug::text('Found Premium Policies to apply.', __FILE__, __LINE__, __METHOD__, 10);
foreach ($pplf as $pp_obj) {
Debug::text('Found Premium Policy: ID: ' . $pp_obj->getId() . ' Type: ' . $pp_obj->getType(), __FILE__, __LINE__, __METHOD__, 10);
//FIXME: Support manually setting a premium policy through the Edit Hours page?
//In those cases, just skip auto-calculating it and accept it?
switch ($pp_obj->getType()) {
case 10:
//Date/Time
Debug::text(' Date/Time Premium Policy...', __FILE__, __LINE__, __METHOD__, 10);
//Make sure this is a valid day
//Take into account shifts that span midnight though, where one half of the shift is eligilble for premium time.
//ie: Premium Policy starts 7AM to 7PM on Sat/Sun. Punches in at 9PM Friday and out at 9AM Sat, we need to check if both days are valid.
//FIXME: Handle shifts that are longer than 24hrs in length.
if ($pp_obj->isActive($this->getUserDateObject()->getDateStamp() - 86400, $this->getUserDateObject()->getDateStamp() + 86400)) {
Debug::text(' Premium Policy Is Active On OR Around This Day.', __FILE__, __LINE__, __METHOD__, 10);
$total_daily_time_used = 0;
$daily_trigger_time = 0;
$udtlf = new UserDateTotalListFactory();
if ($pp_obj->isHourRestricted() == TRUE) {
if ($pp_obj->getWeeklyTriggerTime() > 0) {
//Get Pay Period Schedule info
if (is_object($this->getUserDateObject()->getPayPeriodObject()) and is_object($this->getUserDateObject()->getPayPeriodObject()->getPayPeriodScheduleObject())) {
$start_week_day_id = $this->getUserDateObject()->getPayPeriodObject()->getPayPeriodScheduleObject()->getStartWeekDay();
} else {
$start_week_day_id = 0;
}
Debug::text('Start Week Day ID: ' . $start_week_day_id, __FILE__, __LINE__, __METHOD__, 10);
$weekly_total_time = $udtlf->getWeekRegularTimeSumByUserIDAndEpochAndStartWeekEpoch($this->getUserDateObject()->getUser(), $this->getUserDateObject()->getDateStamp(), TTDate::getBeginWeekEpoch($this->getUserDateObject()->getDateStamp(), $start_week_day_id));
if ($weekly_total_time > $pp_obj->getWeeklyTriggerTime()) {
$daily_trigger_time = 0;
} else {
$daily_trigger_time = $pp_obj->getWeeklyTriggerTime() - $weekly_total_time;
}
Debug::text(' Weekly Trigger Time: ' . $daily_trigger_time, __FILE__, __LINE__, __METHOD__, 10);
}
if ($pp_obj->getDailyTriggerTime() > 0 and $pp_obj->getDailyTriggerTime() > $daily_trigger_time) {
$daily_trigger_time = $pp_obj->getDailyTriggerTime();
}
}
Debug::text(' Daily Trigger Time: ' . $daily_trigger_time, __FILE__, __LINE__, __METHOD__, 10);
//Loop through all worked (status: 20) UserDateTotalRows
$udtlf->getByUserDateIdAndStatus($this->getUserDateID(), 20);
$i = 1;
if ($udtlf->getRecordCount() > 0) {
Debug::text('Found Total Hours to attempt to apply premium policy... Record Count: ' . $udtlf->getRecordCount(), __FILE__, __LINE__, __METHOD__, 10);
foreach ($udtlf as $udt_obj) {
Debug::text('UserDateTotal ID: ' . $udt_obj->getID() . ' Total Time: ' . $udt_obj->getTotalTime(), __FILE__, __LINE__, __METHOD__, 10);
//Ignore incomplete punches
if ($udt_obj->getTotalTime() == 0) {
continue;
}
//How do we handle actual shifts for premium time?
//So if premium policy starts at 1PM for shifts, to not
//include employees who return from lunch at 1:30PM.
//Create a function that takes all punches for a day, and returns
//the first in and last out time for a given shift when taking
//into account minimum time between shifts, as well as the total time for that shift.
//We can then use that time for ActiveTime on premium policies, and determine if a
//punch falls within the active time, then we add it to the total.
if ($pp_obj->isTimeRestricted() == TRUE and $udt_obj->getPunchControlID() != FALSE) {
Debug::text('Time Restricted Premium Policy, lookup punches to get times.', __FILE__, __LINE__, __METHOD__, 10);
if ($pp_obj->getIncludePartialPunch() == FALSE) {
$shift_data = $this->getShiftDataByUserDateID($this->getUserDateID());
}
$plf = new PunchListFactory();
$plf->getByPunchControlId($udt_obj->getPunchControlID());
if ($plf->getRecordCount() > 0) {
Debug::text('Found Punches: ' . $plf->getRecordCount(), __FILE__, __LINE__, __METHOD__, 10);
foreach ($plf as $punch_obj) {
if ($pp_obj->getIncludePartialPunch() == TRUE) {
//Debug::text('Including Partial Punches...', __FILE__, __LINE__, __METHOD__, 10);
if ($punch_obj->getStatus() == 10) {
$punch_times['in'] = $punch_obj->getTimeStamp();
} elseif ($punch_obj->getStatus() == 20) {
$punch_times['out'] = $punch_obj->getTimeStamp();
}
} else {
if (isset($shift_data) and is_array($shift_data)) {
foreach ($shift_data as $shift) {
if ($punch_obj->getTimeStamp() >= $shift['first_in'] and $punch_obj->getTimeStamp() <= $shift['last_out']) {
//Debug::Arr($shift,'Shift Data...', __FILE__, __LINE__, __METHOD__, 10);
Debug::text('Punch (' . TTDate::getDate('DATE+TIME', $punch_obj->getTimeStamp()) . ') inside shift time...', __FILE__, __LINE__, __METHOD__, 10);
$punch_times['in'] = $shift['first_in'];
$punch_times['out'] = $shift['last_out'];
break;
} else {
Debug::text('Punch (' . TTDate::getDate('DATE+TIME', $punch_obj->getTimeStamp()) . ') outside shift time...', __FILE__, __LINE__, __METHOD__, 10);
}
}
}
}
}
if (isset($punch_times) and count($punch_times) == 2 and $pp_obj->isActiveTime($punch_times['in'], $punch_times['out']) == TRUE) {
//Debug::Arr($punch_times, 'Punch Times: ', __FILE__, __LINE__, __METHOD__, 10);
$punch_total_time = $pp_obj->getPartialPunchTotalTime($punch_times['in'], $punch_times['out'], $udt_obj->getTotalTime());
Debug::text('Valid Punch pair in active time, Partial Punch Total Time: ' . $punch_total_time, __FILE__, __LINE__, __METHOD__, 10);
} else {
Debug::text('InValid Punch Pair or outside Active Time...', __FILE__, __LINE__, __METHOD__, 10);
$punch_total_time = 0;
}
}
} elseif ($pp_obj->isActive($udt_obj->getUserDateObject()->getDateStamp()) == TRUE) {
$punch_total_time = $udt_obj->getTotalTime();
} else {
$punch_total_time = 0;
}
Debug::text('aPunch Total Time: ' . $punch_total_time, __FILE__, __LINE__, __METHOD__, 10);
//Apply meal policy adjustment as early as possible.
if ($pp_obj->getIncludeMealPolicy() == TRUE and isset($udt_meal_policy_adjustment_arr[$udt_obj->getId()])) {
Debug::text(' Meal Policy Adjustment Found: ' . $udt_meal_policy_adjustment_arr[$udt_obj->getId()], __FILE__, __LINE__, __METHOD__, 10);
$punch_total_time = bcadd($punch_total_time, $udt_meal_policy_adjustment_arr[$udt_obj->getId()]);
$tmp_punch_total_time = bcadd($udt_obj->getTotalTime(), $udt_meal_policy_adjustment_arr[$udt_obj->getId()]);
} else {
$tmp_punch_total_time = $udt_obj->getTotalTime();
}
Debug::text('bPunch Total Time: ' . $punch_total_time, __FILE__, __LINE__, __METHOD__, 10);
//Apply break policy adjustment as early as possible.
if ($pp_obj->getIncludeBreakPolicy() == TRUE and isset($udt_break_policy_adjustment_arr[$udt_obj->getId()])) {
Debug::text(' Break Policy Adjustment Found: ' . $udt_break_policy_adjustment_arr[$udt_obj->getId()], __FILE__, __LINE__, __METHOD__, 10);
$punch_total_time = bcadd($punch_total_time, $udt_break_policy_adjustment_arr[$udt_obj->getId()]);
$tmp_punch_total_time = bcadd($udt_obj->getTotalTime(), $udt_break_policy_adjustment_arr[$udt_obj->getId()]);
} else {
$tmp_punch_total_time = $udt_obj->getTotalTime();
}
Debug::text('cPunch Total Time: ' . $punch_total_time, __FILE__, __LINE__, __METHOD__, 10);
$total_daily_time_used += $tmp_punch_total_time;
Debug::text('Daily Total Time Used: ' . $total_daily_time_used, __FILE__, __LINE__, __METHOD__, 10);
//FIXME: Should the daily/weekly trigger time be >= instead of >.
//That way if the policy is active after 7.5hrs, punch time of exactly 7.5hrs will still
//activate the policy, rather then requiring 7.501hrs+
if ($punch_total_time > 0 and $total_daily_time_used > $daily_trigger_time) {
Debug::text('Past Trigger Time!!', __FILE__, __LINE__, __METHOD__, 10);
//Calculate how far past trigger time we are.
$past_trigger_time = $total_daily_time_used - $daily_trigger_time;
if ($punch_total_time > $past_trigger_time) {
$punch_total_time = $past_trigger_time;
Debug::text('Using Past Trigger Time as punch total time: ' . $past_trigger_time, __FILE__, __LINE__, __METHOD__, 10);
} else {
Debug::text('NOT Using Past Trigger Time as punch total time: ' . $past_trigger_time, __FILE__, __LINE__, __METHOD__, 10);
}
$total_time = $punch_total_time;
if ($pp_obj->getMinimumTime() > 0 or $pp_obj->getMaximumTime() > 0) {
$premium_policy_daily_total_time = (int) $udtlf->getPremiumPolicySumByUserDateIDAndPremiumPolicyID($this->getUserDateID(), $pp_obj->getId());
Debug::text(' Premium Policy Daily Total Time: ' . $premium_policy_daily_total_time . ' Minimum Time: ' . $pp_obj->getMinimumTime() . ' Maximum Time: ' . $pp_obj->getMaximumTime() . ' Total Time: ' . $total_time, __FILE__, __LINE__, __METHOD__, 10);
if ($pp_obj->getMinimumTime() > 0) {
//FIXME: Split the minimum time up between all the punches somehow.
//Apply the minimum time on the last punch, otherwise if there are two punch pairs of 15min each
//and a 1hr minimum time, if the minimum time is applied to the first, it will be 1hr and 15min
//for the day. If its applied to the last it will be just 1hr.
//Min & Max time is based on the shift time, rather then per punch pair time.
//FIXME: If there is a minimum time set to say 9hrs, and the punches go like this:
// In: 7:00AM Out: 3:00:PM, Out: 3:30PM (missing 2nd In Punch), the minimum time won't be calculated due to the invalid punch pair.
if ($i == $udtlf->getRecordCount() and bcadd($premium_policy_daily_total_time, $total_time) < $pp_obj->getMinimumTime()) {
$total_time = bcsub($pp_obj->getMinimumTime(), $premium_policy_daily_total_time);
}
}
Debug::text(' Total Time After Minimum is applied: ' . $total_time, __FILE__, __LINE__, __METHOD__, 10);
if ($pp_obj->getMaximumTime() > 0) {
//Min & Max time is based on the shift time, rather then per punch pair time.
if (bcadd($premium_policy_daily_total_time, $total_time) > $pp_obj->getMaximumTime()) {
Debug::text(' bMore than Maximum Time...', __FILE__, __LINE__, __METHOD__, 10);
$total_time = bcsub($total_time, bcsub(bcadd($premium_policy_daily_total_time, $total_time), $pp_obj->getMaximumTime()));
}
}
}
Debug::text(' Premium Punch Total Time: ' . $total_time, __FILE__, __LINE__, __METHOD__, 10);
if ($total_time > 0) {
Debug::text(' Applying Premium Time!: ' . $total_time, __FILE__, __LINE__, __METHOD__, 10);
$udtf = new UserDateTotalFactory();
$udtf->setUserDateID($this->getUserDateID());
$udtf->setStatus(10);
//System
$udtf->setType(40);
//Premium
$udtf->setPremiumPolicyId($pp_obj->getId());
$udtf->setBranch($udt_obj->getBranch());
$udtf->setDepartment($udt_obj->getDepartment());
$udtf->setJob($udt_obj->getJob());
$udtf->setJobItem($udt_obj->getJobItem());
$udtf->setQuantity($udt_obj->getQuantity());
$udtf->setBadQuantity($udt_obj->getBadQuantity());
$udtf->setTotalTime($total_time);
$udtf->setEnableCalcSystemTotalTime(FALSE);
if ($udtf->isValid() == TRUE) {
$udtf->Save();
}
unset($udtf);
} else {
Debug::text(' Premium Punch Total Time is 0...', __FILE__, __LINE__, __METHOD__, 10);
}
} else {
Debug::text('Not Past Trigger Time Yet or Punch Time is 0...', __FILE__, __LINE__, __METHOD__, 10);
}
$i++;
}
}
}
break;
case 20:
//Differential
Debug::text(' Differential Premium Policy...', __FILE__, __LINE__, __METHOD__, 10);
//Loop through all worked (status: 20) UserDateTotalRows
$udtlf = new UserDateTotalListFactory();
$udtlf->getByUserDateIdAndStatus($this->getUserDateID(), 20);
if ($udtlf->getRecordCount() > 0) {
Debug::text('Found Total Hours to attempt to apply premium policy... Record Count: ' . $udtlf->getRecordCount(), __FILE__, __LINE__, __METHOD__, 10);
foreach ($udtlf as $udt_obj) {
//Ignore incomplete punches
if ($udt_obj->getTotalTime() == 0) {
continue;
}
if ($pp_obj->getBranchSelectionType() == 10 and ($pp_obj->getExcludeDefaultBranch() == FALSE or $pp_obj->getExcludeDefaultBranch() == TRUE and $udt_obj->getBranch() != $this->getUserDateObject()->getUserObject()->getDefaultBranch()) or $pp_obj->getBranchSelectionType() == 20 and in_array($udt_obj->getBranch(), (array) $pp_obj->getBranch()) and ($pp_obj->getExcludeDefaultBranch() == FALSE or $pp_obj->getExcludeDefaultBranch() == TRUE and $udt_obj->getBranch() != $this->getUserDateObject()->getUserObject()->getDefaultBranch()) or $pp_obj->getBranchSelectionType() == 30 and !in_array($udt_obj->getBranch(), (array) $pp_obj->getBranch()) and ($pp_obj->getExcludeDefaultBranch() == FALSE or $pp_obj->getExcludeDefaultBranch() == TRUE and $udt_obj->getBranch() != $this->getUserDateObject()->getUserObject()->getDefaultBranch())) {
Debug::text(' Shift Differential... Meets Branch Criteria! Select Type: ' . $pp_obj->getBranchSelectionType() . ' Exclude Default Branch: ' . (int) $pp_obj->getExcludeDefaultBranch() . ' Default Branch: ' . $this->getUserDateObject()->getUserObject()->getDefaultBranch(), __FILE__, __LINE__, __METHOD__, 10);
if ($pp_obj->getDepartmentSelectionType() == 10 and ($pp_obj->getExcludeDefaultDepartment() == FALSE or $pp_obj->getExcludeDefaultDepartment() == TRUE and $udt_obj->getDepartment() != $this->getUserDateObject()->getUserObject()->getDefaultDepartment()) or $pp_obj->getDepartmentSelectionType() == 20 and in_array($udt_obj->getDepartment(), (array) $pp_obj->getDepartment()) and ($pp_obj->getExcludeDefaultDepartment() == FALSE or $pp_obj->getExcludeDefaultDepartment() == TRUE and $udt_obj->getDepartment() != $this->getUserDateObject()->getUserObject()->getDefaultDepartment()) or $pp_obj->getDepartmentSelectionType() == 30 and !in_array($udt_obj->getDepartment(), (array) $pp_obj->getDepartment()) and ($pp_obj->getExcludeDefaultDepartment() == FALSE or $pp_obj->getExcludeDefaultDepartment() == TRUE and $udt_obj->getDepartment() != $this->getUserDateObject()->getUserObject()->getDefaultDepartment())) {
Debug::text(' Shift Differential... Meets Department Criteria! Select Type: ' . $pp_obj->getDepartmentSelectionType() . ' Exclude Default Department: ' . (int) $pp_obj->getExcludeDefaultDepartment() . ' Default Department: ' . $this->getUserDateObject()->getUserObject()->getDefaultDepartment(), __FILE__, __LINE__, __METHOD__, 10);
if ($pp_obj->getJobGroupSelectionType() == 10 or $pp_obj->getJobGroupSelectionType() == 20 and (is_object($udt_obj->getJobObject()) and in_array($udt_obj->getJobObject()->getGroup(), (array) $pp_obj->getJobGroup())) or $pp_obj->getJobGroupSelectionType() == 30 and (is_object($udt_obj->getJobObject()) and !in_array($udt_obj->getJobObject()->getGroup(), (array) $pp_obj->getJobGroup()))) {
Debug::text(' Shift Differential... Meets Job Group Criteria! Select Type: ' . $pp_obj->getJobGroupSelectionType(), __FILE__, __LINE__, __METHOD__, 10);
if ($pp_obj->getJobSelectionType() == 10 or $pp_obj->getJobSelectionType() == 20 and in_array($udt_obj->getJob(), (array) $pp_obj->getJob()) or $pp_obj->getJobSelectionType() == 30 and !in_array($udt_obj->getJob(), (array) $pp_obj->getJob())) {
Debug::text(' Shift Differential... Meets Job Criteria! Select Type: ' . $pp_obj->getJobSelectionType(), __FILE__, __LINE__, __METHOD__, 10);
if ($pp_obj->getJobItemGroupSelectionType() == 10 or $pp_obj->getJobItemGroupSelectionType() == 20 and (is_object($udt_obj->getJobItemObject()) and in_array($udt_obj->getJobItemObject()->getGroup(), (array) $pp_obj->getJobItemGroup())) or $pp_obj->getJobItemGroupSelectionType() == 30 and (is_object($udt_obj->getJobItemObject()) and !in_array($udt_obj->getJobItemObject()->getGroup(), (array) $pp_obj->getJobItemGroup()))) {
Debug::text(' Shift Differential... Meets Task Group Criteria! Select Type: ' . $pp_obj->getJobItemGroupSelectionType(), __FILE__, __LINE__, __METHOD__, 10);
if ($pp_obj->getJobItemSelectionType() == 10 or $pp_obj->getJobItemSelectionType() == 20 and in_array($udt_obj->getJobItem(), (array) $pp_obj->getJobItem()) or $pp_obj->getJobItemSelectionType() == 30 and !in_array($udt_obj->getJobItem(), (array) $pp_obj->getJobItem())) {
Debug::text(' Shift Differential... Meets Task Criteria! Select Type: ' . $pp_obj->getJobSelectionType(), __FILE__, __LINE__, __METHOD__, 10);
$premium_policy_daily_total_time = 0;
$punch_total_time = $udt_obj->getTotalTime();
$total_time = 0;
//Apply meal policy adjustment BEFORE min/max times
if ($pp_obj->getIncludeMealPolicy() == TRUE and isset($udt_meal_policy_adjustment_arr[$udt_obj->getId()])) {
Debug::text(' Meal Policy Adjustment Found: ' . $udt_meal_policy_adjustment_arr[$udt_obj->getId()], __FILE__, __LINE__, __METHOD__, 10);
$punch_total_time = bcadd($punch_total_time, $udt_meal_policy_adjustment_arr[$udt_obj->getId()]);
}
if ($pp_obj->getIncludeBreakPolicy() == TRUE and isset($udt_break_policy_adjustment_arr[$udt_obj->getId()])) {
Debug::text(' Break Policy Adjustment Found: ' . $udt_break_policy_adjustment_arr[$udt_obj->getId()], __FILE__, __LINE__, __METHOD__, 10);
$punch_total_time = bcadd($punch_total_time, $udt_break_policy_adjustment_arr[$udt_obj->getId()]);
}
if ($pp_obj->getMinimumTime() > 0 or $pp_obj->getMaximumTime() > 0) {
$premium_policy_daily_total_time = $udtlf->getPremiumPolicySumByUserDateIDAndPremiumPolicyID($this->getUserDateID(), $pp_obj->getId());
Debug::text(' Premium Policy Daily Total Time: ' . $premium_policy_daily_total_time . ' Minimum Time: ' . $pp_obj->getMinimumTime() . ' Maximum Time: ' . $pp_obj->getMaximumTime(), __FILE__, __LINE__, __METHOD__, 10);
if ($pp_obj->getMinimumTime() > 0) {
if ($daily_total_time < $pp_obj->getMinimumTime()) {
//Split the minimum time up between all punches
//We only get IN punches, so we don't need to divide $total_punches by 2.
//This won't calculate the proper amount if punches aren't paired, but everything
//is broken then anyways.
$total_time = bcdiv($pp_obj->getMinimumTime(), $total_punches);
Debug::text(' Daily Total Time is less the Minimum, using: ' . $total_time . ' Total Punches: ' . $total_punches, __FILE__, __LINE__, __METHOD__, 10);
} else {
Debug::text(' Daily Total is more then minimum...', __FILE__, __LINE__, __METHOD__, 10);
$total_time = $punch_total_time;
}
} else {
$total_time = $punch_total_time;
}
Debug::text(' Total Time After Minimum is applied: ' . $total_time, __FILE__, __LINE__, __METHOD__, 10);
if ($pp_obj->getMaximumTime() > 0) {
if ($total_time > $pp_obj->getMaximumTime()) {
Debug::text(' aMore than Maximum Time...', __FILE__, __LINE__, __METHOD__, 10);
$total_time = $pp_obj->getMaximumTime();
} elseif (bcadd($premium_policy_daily_total_time, $total_time) > $pp_obj->getMaximumTime()) {
Debug::text(' bMore than Maximum Time...', __FILE__, __LINE__, __METHOD__, 10);
$total_time = bcsub(bcadd($premium_policy_daily_total_time, $total_time), $pp_obj->getMaximumTime());
}
}
} else {
$total_time = $punch_total_time;
}
Debug::text(' Premium Punch Total Time: ' . $total_time, __FILE__, __LINE__, __METHOD__, 10);
if ($total_time > 0) {
Debug::text(' Applying Premium Time!: ' . $total_time, __FILE__, __LINE__, __METHOD__, 10);
$udtf = new UserDateTotalFactory();
$udtf->setUserDateID($this->getUserDateID());
$udtf->setStatus(10);
//System
$udtf->setType(40);
//Premium
$udtf->setPremiumPolicyId($pp_obj->getId());
$udtf->setBranch($udt_obj->getBranch());
$udtf->setDepartment($udt_obj->getDepartment());
$udtf->setJob($udt_obj->getJob());
$udtf->setJobItem($udt_obj->getJobItem());
$udtf->setQuantity($udt_obj->getQuantity());
$udtf->setBadQuantity($udt_obj->getBadQuantity());
$udtf->setTotalTime($total_time);
$udtf->setEnableCalcSystemTotalTime(FALSE);
if ($udtf->isValid() == TRUE) {
$udtf->Save();
}
unset($udtf);
} else {
Debug::text(' Premium Punch Total Time is 0...', __FILE__, __LINE__, __METHOD__, 10);
}
} else {
Debug::text(' Shift Differential... DOES NOT Meet Task Criteria!', __FILE__, __LINE__, __METHOD__, 10);
}
} else {
Debug::text(' Shift Differential... DOES NOT Meet Task Group Criteria!', __FILE__, __LINE__, __METHOD__, 10);
}
} else {
Debug::text(' Shift Differential... DOES NOT Meet Job Criteria!', __FILE__, __LINE__, __METHOD__, 10);
}
} else {
Debug::text(' Shift Differential... DOES NOT Meet Job Group Criteria!', __FILE__, __LINE__, __METHOD__, 10);
}
} else {
Debug::text(' Shift Differential... DOES NOT Meet Department Criteria!', __FILE__, __LINE__, __METHOD__, 10);
}
} else {
Debug::text(' Shift Differential... DOES NOT Meet Branch Criteria!', __FILE__, __LINE__, __METHOD__, 10);
}
}
}
break;
case 30:
//Meal/Break
Debug::text(' Meal/Break Premium Policy...', __FILE__, __LINE__, __METHOD__, 10);
if ($pp_obj->getDailyTriggerTime() == 0 or $pp_obj->getDailyTriggerTime() > 0 and $daily_total_time >= $pp_obj->getDailyTriggerTime()) {
//Find maximum worked without a break.
$plf = new PunchListFactory();
$plf->getByUserDateId($this->getUserDateID());
//Get all punches for the day.
if ($plf->getRecordCount() > 0) {
Debug::text('Found Punches: ' . $plf->getRecordCount(), __FILE__, __LINE__, __METHOD__, 10);
foreach ($plf as $p_obj) {
Debug::text('TimeStamp: ' . $p_obj->getTimeStamp() . ' Status: ' . $p_obj->getStatus(), __FILE__, __LINE__, __METHOD__, 10);
$punch_pairs[$p_obj->getPunchControlID()][] = array('status_id' => $p_obj->getStatus(), 'punch_control_id' => $p_obj->getPunchControlID(), 'time_stamp' => $p_obj->getTimeStamp());
}
if (isset($punch_pairs)) {
$prev_punch_timestamp = NULL;
$maximum_time_worked_without_break = 0;
foreach ($punch_pairs as $punch_pair) {
if (count($punch_pair) > 1) {
//Total Punch Time
$total_punch_pair_time = $punch_pair[1]['time_stamp'] - $punch_pair[0]['time_stamp'];
$maximum_time_worked_without_break += $total_punch_pair_time;
Debug::text('Total Punch Pair Time: ' . $total_punch_pair_time . ' Maximum No Break Time: ' . $maximum_time_worked_without_break, __FILE__, __LINE__, __METHOD__, 10);
if ($prev_punch_timestamp !== NULL) {
$break_time = $punch_pair[0]['time_stamp'] - $prev_punch_timestamp;
if ($break_time > $pp_obj->getMinimumBreakTime()) {
Debug::text('Exceeded Minimum Break Time: ' . $break_time . ' Minimum: ' . $pp_obj->getMinimumBreakTime(), __FILE__, __LINE__, __METHOD__, 10);
$maximum_time_worked_without_break = 0;
}
}
if ($maximum_time_worked_without_break > $pp_obj->getMaximumNoBreakTime()) {
Debug::text('Exceeded maximum no break time!', __FILE__, __LINE__, __METHOD__, 10);
if ($pp_obj->getMaximumTime() > $pp_obj->getMinimumTime()) {
$total_time = $pp_obj->getMaximumTime();
} else {
$total_time = $pp_obj->getMinimumTime();
}
if ($total_time > 0) {
Debug::text(' Applying Meal/Break Premium Time!: ' . $total_time, __FILE__, __LINE__, __METHOD__, 10);
//Get Punch Control obj.
$pclf = new PunchControlListFactory();
$pclf->getById($punch_pair[0]['punch_control_id']);
if ($pclf->getRecordCount() > 0) {
$pc_obj = $pclf->getCurrent();
}
$udtf = new UserDateTotalFactory();
$udtf->setUserDateID($this->getUserDateID());
$udtf->setStatus(10);
//System
$udtf->setType(40);
//Premium
$udtf->setPremiumPolicyId($pp_obj->getId());
if (isset($pc_obj) and is_object($pc_obj)) {
$udtf->setBranch($pc_obj->getBranch());
$udtf->setDepartment($pc_obj->getDepartment());
$udtf->setJob($pc_obj->getJob());
$udtf->setJobItem($pc_obj->getJobItem());
}
$udtf->setTotalTime($total_time);
$udtf->setEnableCalcSystemTotalTime(FALSE);
if ($udtf->isValid() == TRUE) {
$udtf->Save();
}
unset($udtf);
break;
//Stop looping through punches.
}
} else {
Debug::text('Did not exceed maximum no break time yet...', __FILE__, __LINE__, __METHOD__, 10);
}
$prev_punch_timestamp = $punch_pair[1]['time_stamp'];
} else {
Debug::text('Found UnPaired Punch, Ignorning...', __FILE__, __LINE__, __METHOD__, 10);
}
}
unset($plf, $punch_pairs, $punch_pair, $prev_punch_timestamp, $maximum_time_worked_without_break, $total_time);
}
}
} else {
Debug::text(' Not within Daily Total Time: ' . $daily_total_time . ' Trigger Time: ' . $pp_obj->getDailyTriggerTime(), __FILE__, __LINE__, __METHOD__, 10);
}
break;
case 100:
//Advanced
Debug::text(' Advanced Premium Policy...', __FILE__, __LINE__, __METHOD__, 10);
//Make sure this is a valid day
if ($pp_obj->isActive($this->getUserDateObject()->getDateStamp() - 86400, $this->getUserDateObject()->getDateStamp() + 86400)) {
Debug::text(' Premium Policy Is Active On This Day.', __FILE__, __LINE__, __METHOD__, 10);
$total_daily_time_used = 0;
$daily_trigger_time = 0;
$udtlf = new UserDateTotalListFactory();
if ($pp_obj->isHourRestricted() == TRUE) {
if ($pp_obj->getWeeklyTriggerTime() > 0) {
//Get Pay Period Schedule info
if (is_object($this->getUserDateObject()->getPayPeriodObject()) and is_object($this->getUserDateObject()->getPayPeriodObject()->getPayPeriodScheduleObject())) {
$start_week_day_id = $this->getUserDateObject()->getPayPeriodObject()->getPayPeriodScheduleObject()->getStartWeekDay();
} else {
$start_week_day_id = 0;
}
Debug::text('Start Week Day ID: ' . $start_week_day_id, __FILE__, __LINE__, __METHOD__, 10);
$weekly_total_time = $udtlf->getWeekRegularTimeSumByUserIDAndEpochAndStartWeekEpoch($this->getUserDateObject()->getUser(), $this->getUserDateObject()->getDateStamp(), TTDate::getBeginWeekEpoch($this->getUserDateObject()->getDateStamp(), $start_week_day_id));
if ($weekly_total_time > $pp_obj->getWeeklyTriggerTime()) {
$daily_trigger_time = 0;
} else {
$daily_trigger_time = $pp_obj->getWeeklyTriggerTime() - $weekly_total_time;
}
Debug::text(' Weekly Trigger Time: ' . $daily_trigger_time, __FILE__, __LINE__, __METHOD__, 10);
}
if ($pp_obj->getDailyTriggerTime() > 0 and $pp_obj->getDailyTriggerTime() > $daily_trigger_time) {
$daily_trigger_time = $pp_obj->getDailyTriggerTime();
}
}
Debug::text(' Daily Trigger Time: ' . $daily_trigger_time, __FILE__, __LINE__, __METHOD__, 10);
//Loop through all worked (status: 20) UserDateTotalRows
$udtlf->getByUserDateIdAndStatus($this->getUserDateID(), 20);
$i = 1;
if ($udtlf->getRecordCount() > 0) {
Debug::text('Found Total Hours to attempt to apply premium policy... Record Count: ' . $udtlf->getRecordCount(), __FILE__, __LINE__, __METHOD__, 10);
foreach ($udtlf as $udt_obj) {
//Ignore incomplete punches
if ($udt_obj->getTotalTime() == 0) {
continue;
}
//Check Shift Differential criteria before calculatating daily/weekly time which
//is more resource intensive.
if ($pp_obj->getBranchSelectionType() == 10 and ($pp_obj->getExcludeDefaultBranch() == FALSE or $pp_obj->getExcludeDefaultBranch() == TRUE and $udt_obj->getBranch() != $this->getUserDateObject()->getUserObject()->getDefaultBranch()) or $pp_obj->getBranchSelectionType() == 20 and in_array($udt_obj->getBranch(), (array) $pp_obj->getBranch()) and ($pp_obj->getExcludeDefaultBranch() == FALSE or $pp_obj->getExcludeDefaultBranch() == TRUE and $udt_obj->getBranch() != $this->getUserDateObject()->getUserObject()->getDefaultBranch()) or $pp_obj->getBranchSelectionType() == 30 and !in_array($udt_obj->getBranch(), (array) $pp_obj->getBranch()) and ($pp_obj->getExcludeDefaultBranch() == FALSE or $pp_obj->getExcludeDefaultBranch() == TRUE and $udt_obj->getBranch() != $this->getUserDateObject()->getUserObject()->getDefaultBranch())) {
Debug::text(' Shift Differential... Meets Branch Criteria! Select Type: ' . $pp_obj->getBranchSelectionType() . ' Exclude Default Branch: ' . (int) $pp_obj->getExcludeDefaultBranch() . ' Default Branch: ' . $this->getUserDateObject()->getUserObject()->getDefaultBranch(), __FILE__, __LINE__, __METHOD__, 10);
if ($pp_obj->getDepartmentSelectionType() == 10 and ($pp_obj->getExcludeDefaultDepartment() == FALSE or $pp_obj->getExcludeDefaultDepartment() == TRUE and $udt_obj->getDepartment() != $this->getUserDateObject()->getUserObject()->getDefaultDepartment()) or $pp_obj->getDepartmentSelectionType() == 20 and in_array($udt_obj->getDepartment(), (array) $pp_obj->getDepartment()) and ($pp_obj->getExcludeDefaultDepartment() == FALSE or $pp_obj->getExcludeDefaultDepartment() == TRUE and $udt_obj->getDepartment() != $this->getUserDateObject()->getUserObject()->getDefaultDepartment()) or $pp_obj->getDepartmentSelectionType() == 30 and !in_array($udt_obj->getDepartment(), (array) $pp_obj->getDepartment()) and ($pp_obj->getExcludeDefaultDepartment() == FALSE or $pp_obj->getExcludeDefaultDepartment() == TRUE and $udt_obj->getDepartment() != $this->getUserDateObject()->getUserObject()->getDefaultDepartment())) {
Debug::text(' Shift Differential... Meets Department Criteria! Select Type: ' . $pp_obj->getDepartmentSelectionType() . ' Exclude Default Department: ' . (int) $pp_obj->getExcludeDefaultDepartment() . ' Default Department: ' . $this->getUserDateObject()->getUserObject()->getDefaultDepartment(), __FILE__, __LINE__, __METHOD__, 10);
if ($pp_obj->getJobGroupSelectionType() == 10 or $pp_obj->getJobGroupSelectionType() == 20 and is_object($udt_obj->getJobObject()) and in_array($udt_obj->getJobObject()->getGroup(), (array) $pp_obj->getJobGroup()) or $pp_obj->getJobGroupSelectionType() == 30 and is_object($udt_obj->getJobObject()) and !in_array($udt_obj->getJobObject()->getGroup(), (array) $pp_obj->getJobGroup())) {
Debug::text(' Shift Differential... Meets Job Group Criteria! Select Type: ' . $pp_obj->getJobGroupSelectionType(), __FILE__, __LINE__, __METHOD__, 10);
if ($pp_obj->getJobSelectionType() == 10 or $pp_obj->getJobSelectionType() == 20 and in_array($udt_obj->getJob(), (array) $pp_obj->getJob()) or $pp_obj->getJobSelectionType() == 30 and !in_array($udt_obj->getJob(), (array) $pp_obj->getJob())) {
Debug::text(' Shift Differential... Meets Job Criteria! Select Type: ' . $pp_obj->getJobSelectionType(), __FILE__, __LINE__, __METHOD__, 10);
if ($pp_obj->getJobItemGroupSelectionType() == 10 or $pp_obj->getJobItemGroupSelectionType() == 20 and is_object($udt_obj->getJobItemObject()) and in_array($udt_obj->getJobItemObject()->getGroup(), (array) $pp_obj->getJobItemGroup()) or $pp_obj->getJobItemGroupSelectionType() == 30 and is_object($udt_obj->getJobItemObject()) and !in_array($udt_obj->getJobItemObject()->getGroup(), (array) $pp_obj->getJobItemGroup())) {
Debug::text(' Shift Differential... Meets Task Group Criteria! Select Type: ' . $pp_obj->getJobItemGroupSelectionType(), __FILE__, __LINE__, __METHOD__, 10);
if ($pp_obj->getJobItemSelectionType() == 10 or $pp_obj->getJobItemSelectionType() == 20 and in_array($udt_obj->getJobItem(), (array) $pp_obj->getJobItem()) or $pp_obj->getJobItemSelectionType() == 30 and !in_array($udt_obj->getJobItem(), (array) $pp_obj->getJobItem())) {
Debug::text(' Shift Differential... Meets Task Criteria! Select Type: ' . $pp_obj->getJobSelectionType(), __FILE__, __LINE__, __METHOD__, 10);
if ($pp_obj->isTimeRestricted() == TRUE and $udt_obj->getPunchControlID() != FALSE) {
Debug::text('Time Restricted Premium Policy, lookup punches to get times.', __FILE__, __LINE__, __METHOD__, 10);
if ($pp_obj->getIncludePartialPunch() == FALSE) {
$shift_data = $this->getShiftDataByUserDateID($this->getUserDateID());
}
$plf = new PunchListFactory();
$plf->getByPunchControlId($udt_obj->getPunchControlID());
if ($plf->getRecordCount() > 0) {
Debug::text('Found Punches: ' . $plf->getRecordCount(), __FILE__, __LINE__, __METHOD__, 10);
foreach ($plf as $punch_obj) {
if ($pp_obj->getIncludePartialPunch() == TRUE) {
//Debug::text('Including Partial Punches...', __FILE__, __LINE__, __METHOD__, 10);
if ($punch_obj->getStatus() == 10) {
$punch_times['in'] = $punch_obj->getTimeStamp();
} elseif ($punch_obj->getStatus() == 20) {
$punch_times['out'] = $punch_obj->getTimeStamp();
}
} else {
if (isset($shift_data) and is_array($shift_data)) {
foreach ($shift_data as $shift) {
if ($punch_obj->getTimeStamp() >= $shift['first_in'] and $punch_obj->getTimeStamp() <= $shift['last_out']) {
//Debug::Arr($shift,'Shift Data...', __FILE__, __LINE__, __METHOD__, 10);
Debug::text('Punch (' . TTDate::getDate('DATE+TIME', $punch_obj->getTimeStamp()) . ') inside shift time...', __FILE__, __LINE__, __METHOD__, 10);
$punch_times['in'] = $shift['first_in'];
$punch_times['out'] = $shift['last_out'];
break;
} else {
Debug::text('Punch (' . TTDate::getDate('DATE+TIME', $punch_obj->getTimeStamp()) . ') outside shift time...', __FILE__, __LINE__, __METHOD__, 10);
}
}
}
}
}
if (isset($punch_times) and count($punch_times) == 2 and $pp_obj->isActiveTime($punch_times['in'], $punch_times['out']) == TRUE) {
//Debug::Arr($punch_times, 'Punch Times: ', __FILE__, __LINE__, __METHOD__, 10);
$punch_total_time = $pp_obj->getPartialPunchTotalTime($punch_times['in'], $punch_times['out'], $udt_obj->getTotalTime());
Debug::text('Valid Punch pair in active time, Partial Punch Total Time: ' . $punch_total_time, __FILE__, __LINE__, __METHOD__, 10);
} else {
Debug::text('InValid Punch Pair or outside Active Time...', __FILE__, __LINE__, __METHOD__, 10);
$punch_total_time = 0;
}
}
} elseif ($pp_obj->isActive($udt_obj->getUserDateObject()->getDateStamp()) == TRUE) {
$punch_total_time = $udt_obj->getTotalTime();
} else {
$punch_total_time = 0;
}
Debug::text('aPunch Total Time: ' . $punch_total_time, __FILE__, __LINE__, __METHOD__, 10);
//Apply meal policy adjustment as early as possible.
if ($pp_obj->getIncludeMealPolicy() == TRUE and isset($udt_meal_policy_adjustment_arr[$udt_obj->getId()])) {
Debug::text(' Meal Policy Adjustment Found: ' . $udt_meal_policy_adjustment_arr[$udt_obj->getId()], __FILE__, __LINE__, __METHOD__, 10);
$punch_total_time = bcadd($punch_total_time, $udt_meal_policy_adjustment_arr[$udt_obj->getId()]);
$tmp_punch_total_time = bcadd($udt_obj->getTotalTime(), $udt_meal_policy_adjustment_arr[$udt_obj->getId()]);
} else {
$tmp_punch_total_time = $udt_obj->getTotalTime();
}
Debug::text('bPunch Total Time: ' . $punch_total_time, __FILE__, __LINE__, __METHOD__, 10);
if ($pp_obj->getIncludeBreakPolicy() == TRUE and isset($udt_break_policy_adjustment_arr[$udt_obj->getId()])) {
Debug::text(' Break Policy Adjustment Found: ' . $udt_break_policy_adjustment_arr[$udt_obj->getId()], __FILE__, __LINE__, __METHOD__, 10);
$punch_total_time = bcadd($punch_total_time, $udt_break_policy_adjustment_arr[$udt_obj->getId()]);
$tmp_punch_total_time = bcadd($udt_obj->getTotalTime(), $udt_break_policy_adjustment_arr[$udt_obj->getId()]);
} else {
$tmp_punch_total_time = $udt_obj->getTotalTime();
}
Debug::text('cPunch Total Time: ' . $punch_total_time, __FILE__, __LINE__, __METHOD__, 10);
$total_daily_time_used += $tmp_punch_total_time;
Debug::text('Daily Total Time Used: ' . $total_daily_time_used, __FILE__, __LINE__, __METHOD__, 10);
if ($punch_total_time > 0 and $total_daily_time_used > $daily_trigger_time) {
Debug::text('Past Trigger Time!!', __FILE__, __LINE__, __METHOD__, 10);
//Calculate how far past trigger time we are.
$past_trigger_time = $total_daily_time_used - $daily_trigger_time;
if ($punch_total_time > $past_trigger_time) {
$punch_total_time = $past_trigger_time;
Debug::text('Using Past Trigger Time as punch total time: ' . $past_trigger_time, __FILE__, __LINE__, __METHOD__, 10);
} else {
Debug::text('NOT Using Past Trigger Time as punch total time: ' . $past_trigger_time, __FILE__, __LINE__, __METHOD__, 10);
}
$total_time = $punch_total_time;
if ($pp_obj->getMinimumTime() > 0 or $pp_obj->getMaximumTime() > 0) {
$premium_policy_daily_total_time = (int) $udtlf->getPremiumPolicySumByUserDateIDAndPremiumPolicyID($this->getUserDateID(), $pp_obj->getId());
Debug::text(' Premium Policy Daily Total Time: ' . $premium_policy_daily_total_time . ' Minimum Time: ' . $pp_obj->getMinimumTime() . ' Maximum Time: ' . $pp_obj->getMaximumTime(), __FILE__, __LINE__, __METHOD__, 10);
if ($pp_obj->getMinimumTime() > 0) {
//FIXME: Split the minimum time up between all the punches somehow.
if ($i == $udtlf->getRecordCount() and bcadd($premium_policy_daily_total_time, $total_time) < $pp_obj->getMinimumTime()) {
$total_time = bcsub($pp_obj->getMinimumTime(), $premium_policy_daily_total_time);
}
}
Debug::text(' Total Time After Minimum is applied: ' . $total_time, __FILE__, __LINE__, __METHOD__, 10);
if ($pp_obj->getMaximumTime() > 0) {
if ($total_time > $pp_obj->getMaximumTime()) {
Debug::text(' aMore than Maximum Time...', __FILE__, __LINE__, __METHOD__, 10);
$total_time = $pp_obj->getMaximumTime();
} elseif (bcadd($premium_policy_daily_total_time, $total_time) > $pp_obj->getMaximumTime()) {
Debug::text(' bMore than Maximum Time...', __FILE__, __LINE__, __METHOD__, 10);
//$total_time = bcsub( bcadd( $premium_policy_daily_total_time, $total_time ), $pp_obj->getMaximumTime() );
$total_time = bcsub($total_time, bcsub(bcadd($premium_policy_daily_total_time, $total_time), $pp_obj->getMaximumTime()));
}
}
}
Debug::text(' Premium Punch Total Time: ' . $total_time, __FILE__, __LINE__, __METHOD__, 10);
if ($total_time > 0) {
Debug::text(' Applying Premium Time!: ' . $total_time, __FILE__, __LINE__, __METHOD__, 10);
$udtf = new UserDateTotalFactory();
$udtf->setUserDateID($this->getUserDateID());
$udtf->setStatus(10);
//System
$udtf->setType(40);
//Premium
$udtf->setPremiumPolicyId($pp_obj->getId());
$udtf->setBranch($udt_obj->getBranch());
$udtf->setDepartment($udt_obj->getDepartment());
$udtf->setJob($udt_obj->getJob());
$udtf->setJobItem($udt_obj->getJobItem());
$udtf->setQuantity($udt_obj->getQuantity());
$udtf->setBadQuantity($udt_obj->getBadQuantity());
$udtf->setTotalTime($total_time);
$udtf->setEnableCalcSystemTotalTime(FALSE);
if ($udtf->isValid() == TRUE) {
$udtf->Save();
}
unset($udtf);
} else {
Debug::text(' Premium Punch Total Time is 0...', __FILE__, __LINE__, __METHOD__, 10);
}
} else {
Debug::text('Not Past Trigger Time Yet or Punch Time is 0...', __FILE__, __LINE__, __METHOD__, 10);
}
} else {
Debug::text(' Shift Differential... DOES NOT Meet Task Criteria!', __FILE__, __LINE__, __METHOD__, 10);
}
} else {
Debug::text(' Shift Differential... DOES NOT Meet Task Group Criteria!', __FILE__, __LINE__, __METHOD__, 10);
}
} else {
Debug::text(' Shift Differential... DOES NOT Meet Job Criteria!', __FILE__, __LINE__, __METHOD__, 10);
}
} else {
Debug::text(' Shift Differential... DOES NOT Meet Job Group Criteria!', __FILE__, __LINE__, __METHOD__, 10);
}
} else {
Debug::text(' Shift Differential... DOES NOT Meet Department Criteria!', __FILE__, __LINE__, __METHOD__, 10);
}
} else {
Debug::text(' Shift Differential... DOES NOT Meet Branch Criteria!', __FILE__, __LINE__, __METHOD__, 10);
}
$i++;
}
}
}
break;
}
}
}
$profiler->stopTimer("UserDateTotal::calcPremiumPolicyTotalTime() - Part 1");
return TRUE;
}