public function main()
{
HtmlPrinter::PrintHtmlHeader("HttpEnt Tests");
HtmlPrinter::PrintFormHeader("Run.php");
//Add your tests here
//HtmlPrinter::PrintTestCases("YourTestName", "Path to database file where your data is stored", "Http")
HtmlPrinter::PrintTestCases("FeatureService", "../../TestData/FeatureService/FeatureServiceTest.dump", "HttpEnt");
HtmlPrinter::PrintSelectTestMode();
HtmlPrinter::PrintSelectOutput();
HtmlPrinter::PrintFormFooter("HttpEnt", "RunTests");
HtmlPrinter::PrintHtmlFooter();
}
public function main()
{
HtmlPrinter::PrintHtmlHeader("Http Tests");
HtmlPrinter::PrintFormHeader("Run.php");
//Add your tests here
//HtmlPrinter::PrintTestCases("YourTestName", "Path to database file where your data is stored", "Api")
HtmlPrinter::PrintTestCases("ResourceService", "../../TestData/ResourceService/ResourceServiceTest.dump", "Http");
HtmlPrinter::PrintTestCases("DrawingService", "../../TestData/DrawingService/DrawingServiceTest.dump", "Http");
HtmlPrinter::PrintTestCases("FeatureService", "../../TestData/FeatureService/FeatureServiceTest.dump", "Http");
HtmlPrinter::PrintTestCases("MappingService", "../../TestData/MappingService/MappingServiceTest.dump", "Http");
HtmlPrinter::PrintTestCases("SiteServiceTests", "../../TestData/SiteService/SiteServiceTest.dump", "Http");
HtmlPrinter::PrintTestCases("WfsTests", "../../TestData/Wfs/WfsTest.dump", "Http");
HtmlPrinter::PrintTestCases("WmsTests", "../../TestData/Wms/WmsTest.dump", "Http");
HtmlPrinter::PrintSelectTestMode();
HtmlPrinter::PrintSelectOutput();
HtmlPrinter::PrintFormFooter("Http", "RunTests");
HtmlPrinter::PrintHtmlFooter();
}
public function ValidateHttpRequest($serviceType, $paramSet, $operation, $actualResult, $file)
{
//Default values for outcome
$exitStatus = 0;
$outcome = "pass";
//Get the content type of the result
$contentType = $actualResult->GetContentType();
//We need to remove the stack trace if an exception is thrown because the different line numbers may fail the test
$resultData = ValidateUtils::RemoveStackTrace($actualResult->GetResultData());
//If we have exception message we need to remove any parts that may contain system dependent information
//Ex. file paths
$resultData = ValidateUtils::ProcessExceptionMessage($resultData);
//Get the extension for the dump file based on the content type of the result
$actualExtension = ValidateUtils::GetExtension($contentType);
//If ALWAYSPASS parameter is defined the the whole validation is skipped.
//This parameter should only be used for clean up operations that are no related to the test
if ($this->vm->Execute("Select ParamValue from Params where ParamName=\"ALWAYSPASS\" and ParamSet={$paramSet}") != SQLITE_ROW) {
//Form a file name that is going to be used for the outputting results to a file
$type = substr($serviceType, 0, strpos($serviceType, "_"));
$dumpFilePath = Utils::GetPath("../../TestData/" . $type . "/DumpFiles/");
$filePath = Utils::GetPath("../../TestData/" . $type . "/DumpFiles/" . $type . "HttpTest");
$fileName = $filePath . "_" . $paramSet . "." . $actualExtension;
if ($_POST['testExecutionMode'] == "dump") {
//if the folder "DumpFiles" is not exist, then user need to create the folder themself
//or the "dump" operation fail, so add these code to create the folder automatically
if (!file_exists($dumpFilePath)) {
mkdir($dumpFilePath);
}
file_put_contents($fileName, "{$resultData}");
} else {
//This section is special case handling for the operations that return different data after each call
$resultData = ValidateUtils::SpecialDataHandling($operation, $resultData, $contentType);
if ($_POST['testExecutionMode'] == "generate" && array_key_exists($paramSet, $_POST)) {
//Get the sample result that is stored in the database. If we are using file on disk for validation
//then do not overwrite the filename in the database
//To distinguish between sample data and filename all filenames should be prefixed with "@@"
$status = $this->vm->Execute("Select Result from HttpTestResults where ParamSet={$paramSet};");
//Get the sample data from the database
$this->vm->Execute("Select Result from HttpTestResults where ParamSet = {$paramSet}");
//When use the GetString to get the result which is actually BlOB will cause exception
//unfortunately, this expection can not be caught by the php engine, cause it is not legal php exception
//maybe it is a problem of the sqlite in mapguide, so use GetBlob here, if the sqlite fix this problem
//we can use try catch
$byteReader = $this->vm->GetBlob("Result");
$sampleResult;
while ($byteReader->Read($resultContent, 1024) > 0) {
$sampleResult .= $resultContent;
}
if ("@@" != substr($sampleResult, 0, 2)) {
$responseBody = "";
//Store the result as a BLOB in the database
//Update the row for that param set or create a new row if we do not have it yet
if ($status == SQLITE_ROW) {
$this->vm->Prepare("update HttpTestResults set Result = :blob where ParamSet={$paramSet};");
} else {
printf("<b>A new row has been created in HttpTestResults table to store the result for operation %s</b><br />", $paramSet);
print "<b>Please, update the Description field for that row later</b><br /><br />";
$this->vm->Prepare("INSERT INTO HttpTestResults(ParamSet, Result) VALUES({$paramSet}, :blob);");
}
$this->vm->BindBlob(":blob", $resultData, strlen($resultData));
$this->vm->Execute();
if ($contentType != null) {
$this->vm->Execute("UPDATE HttpTestResults SET ContentType=\"{$contentType}\" WHERE ParamSet={$paramSet};");
}
//Write the result to a file to ensure the correct data is populated in the database
file_put_contents($fileName, $resultData);
}
} elseif ($_POST['testExecutionMode'] == "validate" || $_POST['testExecutionMode'] == "show") {
$expectedResult = "";
$resultContent = "";
//Get the sample data from the database
$this->vm->Execute("Select Result, ContentType from HttpTestResults where ParamSet={$paramSet}");
$byteReader = $this->vm->GetBlob("Result");
$expectedExtension = ValidateUtils::GetExtension($this->vm->GetString("ContentType"));
while ($byteReader->Read($resultContent, 1024) > 0) {
$expectedResult .= $resultContent;
}
//If we are validating from a file then get the contents of that file
//File names should be prefixed with "@@" to distinguish them from BLOB data
if ("@@" == substr($expectedResult, 0, 2)) {
//Remove "@@" from the filename. Get the path to the file and pump the contents in a variable
$sampleDataFile = substr($expectedResult, 2);
$sampleDataFile = Utils::GetPath($expectedResult);
$expectedResult = file_get_contents($sampleDataFile);
}
if ($_POST['testExecutionMode'] == "validate") {
//Normalize line endings. Don't want stray CRLFs derailing verification
$resultData = str_replace("\r\n", "\n", $resultData);
$expectedResult = str_replace("\r\n", "\n", $expectedResult);
//If the results are different and special validation fails then then the operation failed ->mark it red
if (strncasecmp($resultData, $expectedResult, strlen($resultData . $expectedResult)) && !ValidateUtils::SpecialValidation($operation, $resultData, $expectedResult)) {
$outcome = "fail";
$exitStatus = 1;
if ($expectedExtension != "xml" && $expectedExtension != "html" && $expectedExtension != "txt") {
$expectedResult = "Unable to display binary data";
}
if ($actualExtension != "xml" && $actualExtension != "html" && $actualExtension != "txt") {
$resultData = "Unable to display binary data";
}
}
} else {
$type = substr($serviceType, 0, strpos($serviceType, "_"));
$showPath = Utils::GetPath("../../TestData/" . $type . "/ShowFiles/" . $type . "HttpTest");
$showName = $showPath . "_" . $paramSet . "." . $actualExtension;
file_put_contents($showName, $expectedResult);
}
}
}
}
if ($_POST['output'] == "html") {
if ($outcome == "fail") {
HtmlPrinter::AddResultRow($operation, $outcome, $paramSet, $resultData, $expectedResult);
$str = sprintf("\n****ACTUAL RESULT****\n%s\n****EXPECTED RESULT****\n%s\n********\n\n\n", $resultData, $expectedResult);
fwrite($file, $str);
} else {
HtmlPrinter::AddResultRow($operation, $outcome, $paramSet);
}
} else {
if ($outcome == "fail") {
printf("****" . $serviceType . " " . $paramSet . " " . $operation . " failed.\n");
$str = sprintf("\n****ACTUAL RESULT****\n%s\n****EXPECTED RESULT****\n%s\n********\n\n\n", $resultData, $expectedResult);
echo $str;
fwrite($file, $str);
}
}
return $exitStatus;
}
{
return "John Doe";
}
function getCurrentPage()
{
return "current page content";
}
}
interface Printer
{
function printPage($page);
}
class PlainTextPrinter implements Printer
{
function printPage($page)
{
echo 'PlainText: ' . $page;
}
}
class HtmlPrinter implements Printer
{
function printPage($page)
{
echo 'HTML: ' . $page;
}
}
$book = new Book();
//$printer = new PlainTextPrinter();
$printer = new HtmlPrinter();
$page = $book->getCurrentPage();
$printer->printPage($page);
function RunTest(&$testsRun, $file)
{
try {
$actualResult = new Result();
$exitStatus = 0;
$testName = $_POST['testName'];
//Add the test in the log file
$entry = "\n\n************************************************************\n";
$entry .= sprintf("Executing %s\n", $testName);
$entry .= "************************************************************\n\n";
fwrite($file, $entry);
//Get the list of operations to be executed for this test. This list should comma separated, no spaces.
$this->unitTestVm->Execute("Select ParamSets from TestCase where TestName=\"{$testName}\"");
$sets = $this->unitTestVm->GetString("ParamSets");
$paramSet = strtok($sets, ",");
if ($_POST['output'] == "html") {
//Start the HTML table for the results
HtmlPrinter::PrintResultTableHeader($_POST['requestType'] . " Test " . $testName);
}
//For each operation in the list
//Execute the operation and validate the result
while ($paramSet != "") {
$this->unitTestVm->Execute("Select ParamValue from Params where ParamSet={$paramSet} AND ParamName=\"OPERATION\";");
$paramValue = $this->unitTestVm->GetString("ParamValue");
$testsRun++;
//Add the operation to the log file
$this->AddLogFileEntry($file, $paramValue, $paramSet, $this->unitTestResultVm);
$actualResult = $this->operation->Execute($paramSet, $paramValue);
if (substr_count($_POST['requestType'], "Http")) {
$status = $this->validate->ValidateHttpRequest($_POST['testName'], $paramSet, $paramValue, $actualResult, $file);
} else {
$status = $this->validate->ValidateApiRequest($_POST['testName'], $paramSet, $paramValue, $actualResult, $file);
}
$exitStatus += $status;
$paramSet = strtok(",");
}
//Closes the Html table. Also outputs hidden fields that are needed for Generation mode
if ($_POST['output'] == "html") {
HtmlPrinter::printTableEnd();
HtmlPrinter::PrintGenerateFormHiddenFields();
HtmlPrinter::PrintFormFooter($_POST['requestType'], "Generate");
}
if ($_POST['testExecutionMode'] == "generate") {
Utils::CreateDumpFile($this->unitTestDb);
}
return $exitStatus;
} catch (MgException $e) {
print $e->GetExceptionMessage("en") . "\n";
} catch (SqliteException $s) {
print $s->GetExceptionMessage() . "\n";
}
}
