public function slice()
{
$cr = 0;
$status_current = NULL;
$array_cartridge = array();
$custom_change = FALSE;
$this->load->helper('slicer');
// we bypass this call when checking status block in slicing to make possible for local slicing callback
// so we have to check printer is really in remote slicing case when calling this function (return error if not so)
CoreStatus_checkInIdle($status_current);
if ($status_current == CORESTATUS_VALUE_SLICE && !file_exists(SLICER_FILE_REMOTE_STATUS)) {
$this->_exitWithError500(ERROR_BUSY_PRINTER . ' ' . t(MyERRMSG(ERROR_BUSY_PRINTER)), ERROR_BUSY_PRINTER);
return;
// never reach here
}
// check platform and filament present (do not check filament quantity)
$cr = Slicer_checkPlatformColor($array_cartridge, $custom_change);
if ($cr == ERROR_OK) {
$cr = Slicer_changeTemperByCartridge($array_cartridge, $this->config->item('heat_bed'));
}
// start slice command after checking filament
if ($cr == ERROR_OK) {
$remote_slice = FALSE === $this->input->get('local') ? TRUE : FALSE;
$cr = Slicer_slice($remote_slice && !$custom_change);
}
$this->_return_cr($cr);
return;
}
public function changecartridge_action($mode = '')
{
$abb_cartridge = $this->input->get('v');
if (!$abb_cartridge && !in_array($abb_cartridge, array('l', 'r'))) {
$this->output->set_status_header(403);
// invalid request
return;
}
if ($mode == 'unload_r') {
$mode = 'unload';
} else {
if ($mode == 'load_r') {
$mode = 'load';
} else {
if ($mode != 'cancel_unload') {
//block request when not in idle
$this->load->helper('corestatus');
if (CoreStatus_checkInIdle() == FALSE) {
$this->output->set_status_header(403);
// bad request
return;
}
}
}
}
switch ($mode) {
case 'unload':
$ret_val = PrinterState_unloadFilament($abb_cartridge);
if ($ret_val != ERROR_OK) {
$this->output->set_status_header($ret_val, MyERRMSG($ret_val));
}
break;
case 'cancel_unload':
$ret_val = 0;
@unlink(PRINTERSTATE_FILE_UNLOAD_HEAT);
$ret_val = CoreStatus_setInIdle();
if ($ret_val == FALSE) {
$this->load->helper('printerlog');
PrinterLog_logError('can not set idle after cancelling unloading', __FILE__, __LINE__);
$this->output->set_status_header(ERROR_INTERNAL);
}
break;
case 'load':
$ret_val = PrinterState_loadFilament($abb_cartridge);
if ($ret_val != ERROR_OK) {
$this->output->set_status_header($ret_val);
}
break;
case 'detail':
$id_model = $this->input->get('id');
$this->_display_changecartridge_cartridge_detail($abb_cartridge, $id_model);
break;
case 'write':
$ret_val = 0;
$array_data = array();
$array_old = array();
$color = $this->input->get('c');
$temper = (int) $this->input->get('t');
$material = (int) $this->input->get('m');
$length = (int) $this->input->get('l') * 1000;
$abb_cartridge = $this->input->get('v');
// get cartridge type from old RFID
$ret_val = PrinterState_getCartridgeAsArray($array_old, $abb_cartridge, FALSE);
if ($ret_val != ERROR_OK) {
$this->output->set_status_header(403);
$this->load->helper('printerlog');
PrinterLog_logMessage('read rfid error: ' . $ret_val, __FILE__, __LINE__);
break;
}
// change color from name to hex code
$this->load->helper('printlist');
$ret_val = ModelList__changeColorName($color);
if ($ret_val == ERROR_WRONG_PRM) {
$this->output->set_status_header(404);
$this->load->helper('printerlog');
PrinterLog_logMessage('unknown color name: ' . $color, __FILE__, __LINE__);
break;
}
$color = str_replace('#', '', $color);
// write RFID card
$array_data = array(PRINTERSTATE_TITLE_COLOR => $color, PRINTERSTATE_TITLE_EXT_TEMPER => $temper, PRINTERSTATE_TITLE_INITIAL => $length, PRINTERSTATE_TITLE_MATERIAL => $material, PRINTERSTATE_TITLE_CARTRIDGE => $array_old[PRINTERSTATE_TITLE_CARTRIDGE]);
$ret_val = PrinterState_setCartridgeAsArray($abb_cartridge, $array_data);
if ($ret_val != ERROR_OK) {
$this->output->set_status_header(403);
$this->load->helper('printerlog');
PrinterLog_logMessage('write rfid error: ' . $ret_val, __FILE__, __LINE__);
break;
}
break;
default:
$this->output->set_status_header(403);
// unknown request
break;
}
return;
}
public function youtube_form()
{
$array_status = array();
$model_displayname = NULL;
$this->load->library('parser');
$this->lang->load('youtube_form', $this->config->item('language'));
$this->lang->load('printdetail', $this->config->item('language'));
// timelapse default model name
$this->load->helper('corestatus');
if (CoreStatus_checkInIdle($status_current, $array_status) && array_key_exists(CORESTATUS_TITLE_PRINTMODEL, $array_status)) {
$model_id = NULL;
if (strpos($array_status[CORESTATUS_TITLE_PRINTMODEL], CORESTATUS_VALUE_MID_PREFIXGCODE) === 0) {
// gcode library model
$gcode_info = array();
$gid = (int) substr($array_status[CORESTATUS_TITLE_PRINTMODEL], strlen(CORESTATUS_VALUE_MID_PREFIXGCODE));
$model_displayname = t('timelapse_info_modelname_unknown');
$this->load->helper('printerstoring');
$gcode_info = PrinterStoring_getInfo("gcode", $gid);
if (!is_null($gcode_info) && array_key_exists("name", $gcode_info)) {
$model_displayname = $gcode_info["name"];
}
} else {
switch ($array_status[CORESTATUS_TITLE_PRINTMODEL]) {
case CORESTATUS_VALUE_MID_SLICE:
$preset_id = NULL;
$model_filename = array();
$this->load->helper('slicer');
if (ERROR_OK == Slicer_getModelFile(0, $model_filename, TRUE)) {
foreach ($model_filename as $model_basename) {
if (strlen($model_displayname)) {
$model_displayname .= ' + ' . $model_basename;
} else {
$model_displayname = $model_basename;
}
}
} else {
$model_displayname = t('timelapse_info_modelname_slice');
}
break;
default:
// treat as pre-sliced model
$model_data = array();
$model_displayname = "";
if (is_null($model_id)) {
$this->load->helper('printlist');
$model_id = $array_status[CORESTATUS_TITLE_PRINTMODEL];
}
if (ERROR_OK == ModelList__getDetailAsArray($model_id, $model_data, TRUE)) {
$model_displayname = $model_data[PRINTLIST_TITLE_NAME];
}
break;
}
}
}
if ($this->input->server('REQUEST_METHOD') == 'POST') {
$this->load->library("session");
$title = isset($_POST['yt_title']) ? $_POST['yt_title'] : t('yt_title') . $model_displayname;
$description = isset($_POST['yt_description']) ? $_POST['yt_description'] : t('yt_desc');
// $tags = explode(',', $_POST['yt_tags'] ? $_POST['yt_tags'] : t('yt_tags'));
$tags = explode(',', t('yt_tags'));
$tags = array_map('trim', $tags);
$video_infos = array('yt_title' => $title, 'yt_tags' => $tags, 'yt_desc' => $description, 'yt_privacy' => $_POST["yt_privacy"]);
$this->session->set_userdata($video_infos);
$this->output->set_header("Location: /share/connect_google");
return;
}
$data = array('yt_title' => t('yt_title') . $model_displayname, 'yt_desc' => t('yt_desc'), 'yt_privacy_public' => t('yt_privacy_public'), 'yt_privacy_private' => t('yt_privacy_private'), 'yt_privacy_unlisted' => t('yt_privacy_unlisted'), 'upload_to_yt' => t('upload_to_yt'), 'title_label' => t('title_label'), 'desc_label' => t('desc_label'), 'tags_label' => t('tags_label'), 'privacy_label' => t('privacy_label'), 'back' => t('back'));
$this->_parseBaseTemplate(t('youtube_title'), $this->parser->parse('share/youtube_form', $data, TRUE));
return;
}
public function __construct()
{
global $CFG;
parent::__construct();
// $this->load->helper(array('corestatus', 'url'));
$this->load->helper(array('corestatus', 'printerlog'));
// set proper error handler
set_error_handler(array($this, 'errorToSSO'));
// add header to disable cache (IE need these headers)
$this->output->set_header('Pragma: no-cache');
$this->output->set_header('Cache-Control: no-cache');
// initialisation status files
if (!CoreStatus_initialFile()) {
$this->load->helper('printerlog');
PrinterLog_logError('status files initialisation error when MY_Controller started', __FILE__, __LINE__);
// let request failed
$this->_exitWithError500('file initialisation error');
}
// check tromboning autorisation
if (CoreStatus_checkTromboning(FALSE)) {
$this->load->helper(array('printerlog', 'errorcode'));
PrinterLog_logMessage('detected and refused tromboning connection', __FILE__, __LINE__);
// let request failed
$this->_exitWithError500(ERROR_REMOTE_REFUSE . ' ' . MyERRMSG(ERROR_REMOTE_REFUSE), ERROR_REMOTE_REFUSE);
}
// Workflow management
if (CoreStatus_checkCallREST()) {
// we place the control for REST web service in his own class
// because there are the special error codes for REST web service
// and we do not need them in normal condition
return;
} else {
$status_current = '';
$url_redirect = '';
$array_status = array();
// stats info (do not stats rest, app can initialize cookies in each request)
$this->load->library('session');
if (FALSE === $this->input->cookie('stats_browserLog')) {
$this->input->set_cookie('stats_browserLog', 'ok', 2592000);
// 30 days for browser stats
PrinterLog_statsWebAgent();
}
// check initialization issue
if (CoreStatus_checkInInitialization()) {
if (CoreStatus_checkCallInitialization($url_redirect)) {
return;
// we are calling the right page
}
} else {
if (CoreStatus_checkCallInitialization()) {
$url_redirect = '/';
} else {
if (CoreStatus_checkInUSB()) {
if (CoreStatus_checkCallUSB($url_redirect)) {
return;
// we are calling the right page
}
} else {
if (CoreStatus_checkCallUSB()) {
$url_redirect = '/';
} else {
if (CoreStatus_checkCallDebug()) {
// we always let these interfaces go for debug
return;
} else {
if (CoreStatus_checkInConnection()) {
if (CoreStatus_checkCallNoBlockPageInConnection()) {
return;
// we are calling set hostname, activation or account page
}
if (CoreStatus_checkCallConnection($url_redirect)) {
return;
// we are calling the right page
}
} else {
if (CoreStatus_checkCallConnection()) {
$url_redirect = '/';
} else {
if (!CoreStatus_checkInIdle($status_current, $array_status)) {
switch ($status_current) {
case CORESTATUS_VALUE_RECOVERY:
//TODO finish and test me
if (CoreStatus_checkCallRecovery($url_redirect)) {
return;
// we are calling the right page
}
break;
case CORESTATUS_VALUE_PRINT:
if (CoreStatus_checkCallPrinting($array_status, $url_redirect)) {
return;
// we are calling the right page
}
break;
case CORESTATUS_VALUE_CANCEL:
if (CoreStatus_checkCallCanceling($url_redirect)) {
return;
// we are calling the right page
}
break;
case CORESTATUS_VALUE_LOAD_FILA_L:
case CORESTATUS_VALUE_LOAD_FILA_R:
if (CoreStatus_checkCallloading($url_redirect)) {
return;
// we are calling the right page
}
// return; // we do not block users when charging filament
break;
case CORESTATUS_VALUE_UNLOAD_FILA_L:
case CORESTATUS_VALUE_UNLOAD_FILA_R:
//FIXME finish here to block users
if (CoreStatus_checkCallUnloading($url_redirect)) {
return;
// we are calling the right page
}
break;
case CORESTATUS_VALUE_SLICE:
if (CoreStatus_checkCallSlicing($url_redirect)) {
return;
}
break;
default:
$url_redirect = '/';
// internal error, never reach here normally
break;
}
} else {
if (CoreStatus_checkCallPrintingAjax() || CoreStatus_checkCallCancelingAjax()) {
// let ajax request failed when we finishing printing / canceling
$protocol = isset($_SERVER['SERVER_PROTOCOL']) ? $_SERVER['SERVER_PROTOCOL'] : 'HTTP/1.0';
header($protocol . ' 403');
header('Content-type: text/plain; charset=UTF-8');
echo 'Not in printing / canceling';
exit;
} else {
if (CoreStatus_checkCallPrinting() || CoreStatus_checkCallCanceling()) {
$url_redirect = '/';
} else {
if (CoreStatus_checkInPrinted()) {
if (CoreStatus_checkCallEndPrinting($url_redirect) || CoreStatus_checkCallEndPrintingPlus()) {
return;
}
} else {
if (CoreStatus_checkCallEndPrinting()) {
$url_redirect = '/';
// redirect to homepage when we have no timelapse
}
}
}
}
if ($url_redirect) {
header('Location: ' . $url_redirect);
exit;
}
return;
// continue to generate the current page
}
}
}
}
}
}
}
}
// log error if we have no redirect url when reaching here
if (is_null($url_redirect)) {
$this->load->helper('printerlog');
PrinterLog_logError('no redirect place when MY_Controller finished', __FILE__, __LINE__);
}
header('Location: ' . $url_redirect);
exit;
}
}
function CoreStatus_setInIdle($last_error = FALSE, $error_message = FALSE)
{
$status_previous = '';
$array_previous = array();
$array_status = array(CORESTATUS_TITLE_STARTTIME => NULL);
$ret_val = CoreStatus_checkInIdle($status_previous, $array_previous);
if ($ret_val == TRUE) {
return TRUE;
// we are already in idle
} else {
if ($status_previous == CORESTATUS_VALUE_PRINT || $status_previous == CORESTATUS_VALUE_CANCEL) {
// // stop camera http live streaming
// $ret_val = 0;
// $CI = &get_instance();
// $CI->load->helper('zimapi');
// $ret_val = ZimAPI_cameraOff();
// if ($ret_val != TRUE) {
// return FALSE;
// }
// calculate elapsed time
$time_pass = 0;
$CI =& get_instance();
$CI->load->helper('printerstate');
//TODO think if it's necessary to pass this filepath out of this heavy helper (printerstate)
$time_pass = file_exists(PRINTERSTATE_FILE_PRINTLOG) && array_key_exists(CORESTATUS_TITLE_STARTTIME, $array_previous) ? filemtime(PRINTERSTATE_FILE_PRINTLOG) - $array_previous[CORESTATUS_TITLE_STARTTIME] : time() - $array_previous[CORESTATUS_TITLE_STARTTIME];
$array_status[CORESTATUS_TITLE_ELAPSED_TIME] = $time_pass;
CoreStatus_setInPause(FALSE);
// not necessary in any case, just a safty
// comment initialization of model id to save model info
// $array_status[CORESTATUS_TITLE_PRINTMODEL] = NULL;
}
}
// else if ($status_previous == CORESTATUS_VALUE_UNLOAD_FILA_L
// || $status_previous == CORESTATUS_VALUE_UNLOAD_FILA_R) {
// $CI = &get_instance();
// $CI->load->helper('printerstate');
// $ret_val = PrinterState_afterUnloadFilament();
// if ($ret_val != ERROR_OK) {
// return FALSE;
// }
// }
if ($last_error !== FALSE) {
// add last_error for slicing
//TODO perhaps also check $status_previous == CORESTATUS_VALUE_SLICE ?
$array_status[CORESTATUS_TITLE_LASTERROR] = $last_error;
$array_status[CORESTATUS_TITLE_MESSAGE] = $error_message ? $error_message : NULL;
}
return CoreStatus__setInStatus(CORESTATUS_VALUE_IDLE, $array_status);
}
public function recovery_ajax()
{
//TODO finish me for recovery
$template_data = array();
$ret_val = 0;
$status_current = NULL;
$data_status = array();
$this->load->helper('corestatus');
$this->load->library('parser');
$this->lang->load('printdetail', $this->config->item('language'));
$template_data = array('wait_info' => t('wait_hint_recovery'));
$ret_val = CoreStatus_checkInIdle($status_current, $data_status);
if ($ret_val == TRUE) {
// log recovery finish
$this->load->helper('printerlog');
PrinterLog_logMessage('recovery status finish', __FILE__, __LINE__);
$this->output->set_status_header(202);
return;
} else {
if ($status_current == CORESTATUS_VALUE_RECOVERY) {
if ($data_status[CORESTATUS_TITLE_SUBSTATUS] == CORESTATUS_VALUE_PRINT) {
$template_data['wait_info'] = t('wait_hint_recovery_printing');
} else {
$template_data['wait_info'] = t('wait_hint_recovery_unknown');
$this->load->helper('printerlog');
PrinterLog_logError('unknown substatus value in recovery ' . $data_status[CORESTATUS_TITLE_SUBSTATUS], __FILE__, __LINE__);
}
} else {
$this->output->set_status_header(403);
$this->load->helper('printerlog');
PrinterLog_logError('call recovery status check when not in recovery', __FILE__, __LINE__);
return;
}
}
// parse the ajax part
$this->parser->parse('printdetail/cancel_ajax', $template_data);
// we can use the same view for recovery
$this->output->set_content_type('text/plain; charset=UTF-8');
return;
}
function slice_status_ajax()
{
$ret_val = 0;
$cr = 0;
$array_data = array();
$status_current = NULL;
$display = NULL;
$this->load->helper(array('printerstate', 'slicer'));
$this->load->library('parser');
$ret_val = CoreStatus_checkInIdle($status_current);
if ($ret_val == TRUE) {
$cr = 403;
$this->output->set_status_header($cr);
return;
}
$ret_val = PrinterState_checkBusyStatus($status_current, $array_data);
if ($ret_val == TRUE && $status_current == CORESTATUS_VALUE_IDLE) {
if (isset($array_data[PRINTERSTATE_TITLE_LASTERROR])) {
$cr = $array_data[PRINTERSTATE_TITLE_LASTERROR];
} else {
$cr = ERROR_OK;
}
} else {
if ($ret_val == FALSE && $status_current == CORESTATUS_VALUE_SLICE) {
if (!isset($array_data[PRINTERSTATE_TITLE_PERCENT])) {
$this->load->helper('printerlog');
PrinterLog_logError('can not find percentage in slicing', __FILE__, __LINE__);
$cr = ERROR_INTERNAL;
} else {
$this->lang->load('sliceupload/slice_status_ajax', $this->config->item('language'));
$array_display = array('percent' => $array_data[PRINTERSTATE_TITLE_PERCENT], 'message' => isset($array_data[PRINTERSTATE_TITLE_DETAILMSG]) ? t($array_data[PRINTERSTATE_TITLE_DETAILMSG]) : NULL);
$cr = ERROR_OK;
$this->output->set_status_header($cr);
$this->output->set_content_type('jsonu');
$this->parser->parse('plaintxt', array('display' => json_encode($array_display)));
return;
}
} else {
$this->load->helper('printerlog');
PrinterLog_logError('unknown status in slicing', __FILE__, __LINE__);
$cr = ERROR_INTERNAL;
CoreStatus_setInIdle();
}
}
if (!in_array($cr, array(ERROR_OK, ERROR_INTERNAL, ERROR_LOW_RIGT_FILA, ERROR_LOW_LEFT_FILA, ERROR_MISS_RIGT_FILA, ERROR_MISS_LEFT_FILA, ERROR_MISS_RIGT_CART, ERROR_MISS_LEFT_CART))) {
$this->load->helper('printerlog');
PrinterLog_logError('unknown return after slicing: ' . $cr, __FILE__, __LINE__);
$cr = ERROR_INTERNAL;
}
if ($cr == ERROR_INTERNAL) {
$this->output->set_status_header($cr);
} else {
$this->output->set_status_header(202);
}
$display = $cr . " " . t(MyERRMSG($cr));
$this->output->set_content_type('txt_u');
$this->parser->parse('plaintxt', array('display' => $display));
//optional
return;
}
function Printer_checkPauseStatus()
{
$status_current = NULL;
$temper_status = array();
$CI =& get_instance();
$CI->load->helper('corestatus');
// check status if we are not in canceling
CoreStatus_checkInIdle($status_current);
if ($status_current == CORESTATUS_VALUE_PRINT && CoreStatus_checkInPause()) {
return TRUE;
}
return FALSE;
}
function PrinterState_checkStatusAsArray($extra_info = TRUE)
{
$command = '';
$output = array();
$ret_val = 0;
$data_json = array();
$temp_data[PRINTERSTATE_TITLE_LASTERROR] = array();
$time_start = NULL;
$status_current = '';
// if we need duration, the function that get duration by id is necessary
// and we must stock print list id somewhere in json file
$CI =& get_instance();
$CI->load->helper('corestatus');
if (CoreStatus_checkInUSB()) {
$data_json[PRINTERSTATE_TITLE_STATUS] = CORESTATUS_VALUE_USB;
return $data_json;
} else {
if (CoreStatus_checkInConnection()) {
$data_json[PRINTERSTATE_TITLE_STATUS] = CORESTATUS_VALUE_WAIT_CONNECT;
return $data_json;
}
}
$ret_val = CoreStatus_checkInIdle($status_current, $status_json);
if ($ret_val == TRUE) {
$data_json[PRINTERSTATE_TITLE_STATUS] = CORESTATUS_VALUE_IDLE;
//TODO think about if we need to display last error as 200 (error_ok) or not
if (array_key_exists(CORESTATUS_TITLE_LASTERROR, $status_json) && !is_null($status_json[CORESTATUS_TITLE_LASTERROR]) && $status_json[CORESTATUS_TITLE_LASTERROR] != ERROR_OK) {
// $data_json[PRINTERSTATE_TITLE_EXTEND_PRM][PRINTERSTATE_TITLE_LASTERROR] = $status_json[CORESTATUS_TITLE_LASTERROR];
// $data_json[PRINTERSTATE_TITLE_EXTEND_PRM][PRINTERSTATE_TITLE_DETAILMSG] = $status_json[CORESTATUS_TITLE_MESSAGE];
$data_json[PRINTERSTATE_TITLE_EXTEND_PRM][PRINTERSTATE_TITLE_SLICE_ERR] = $status_json[CORESTATUS_TITLE_LASTERROR] . ' ' . $status_json[CORESTATUS_TITLE_MESSAGE];
}
} else {
if ($ret_val == FALSE) {
$temp_data = array();
$status_old = $status_current;
PrinterState_checkBusyStatus($status_current, $temp_data);
if (in_array($status_current, array(CORESTATUS_VALUE_SLICE, CORESTATUS_VALUE_PRINT))) {
$data_json[PRINTERSTATE_TITLE_PERCENT] = $temp_data[PRINTERSTATE_TITLE_PERCENT];
}
$data_json[PRINTERSTATE_TITLE_STATUS] = $status_current;
// return error code in the first time when we have error from slicing=>idle
if ($status_old == CORESTATUS_VALUE_SLICE && $status_current == CORESTATUS_VALUE_IDLE && array_key_exists(PRINTERSTATE_TITLE_LASTERROR, $temp_data)) {
// $data_json[PRINTERSTATE_TITLE_EXTEND_PRM][PRINTERSTATE_TITLE_LASTERROR] = $temp_data[PRINTERSTATE_TITLE_LASTERROR];
// $data_json[PRINTERSTATE_TITLE_EXTEND_PRM][PRINTERSTATE_TITLE_DETAILMSG] = $temp_data[PRINTERSTATE_TITLE_DETAILMSG];
$data_json[PRINTERSTATE_TITLE_EXTEND_PRM][PRINTERSTATE_TITLE_SLICE_ERR] = $temp_data[PRINTERSTATE_TITLE_LASTERROR] . ' ' . $temp_data[PRINTERSTATE_TITLE_DETAILMSG];
} else {
if ($status_current == CORESTATUS_VALUE_PRINT) {
$print_operation = PRINTERSTATE_VALUE_PRINT_OPERATION_PRINT;
$array_status = array();
// add temperature
if ($extra_info == TRUE && $data_json[PRINTERSTATE_TITLE_PERCENT] != 100) {
$data_temperature = PrinterState_getExtruderTemperaturesAsArray();
if (!is_array($data_temperature)) {
// log internal error
$CI->load->helper('printerlog');
PrinterLog_logError('API error when getting temperatures in printing', __FILE__, __LINE__);
} else {
$data_json[PRINTERSTATE_TITLE_EXTEND_PRM][PRINTERSTATE_TITLE_EXT_TEMP_L] = array_key_exists(PRINTERSTATE_LEFT_EXTRUD, $data_temperature) ? $data_temperature[PRINTERSTATE_LEFT_EXTRUD] : 0;
$data_json[PRINTERSTATE_TITLE_EXTEND_PRM][PRINTERSTATE_TITLE_EXT_TEMP_R] = array_key_exists(PRINTERSTATE_RIGHT_EXTRUD, $data_temperature) ? $data_temperature[PRINTERSTATE_RIGHT_EXTRUD] : 0;
$data_json[PRINTERSTATE_TITLE_EXTEND_PRM][PRINTERSTATE_TITLE_EXT_TEMP_B] = array_key_exists(PRINTERSTATE_HEAT_BED, $data_temperature) ? $data_temperature[PRINTERSTATE_HEAT_BED] : 0;
}
}
// try to calculate time remained when percentage is passed offset
$ret_val = CoreStatus_getStatusArray($array_status);
if ($ret_val == TRUE && isset($array_status[CORESTATUS_TITLE_STARTTIME]) && isset($array_status[CORESTATUS_TITLE_ESTIMATE_T])) {
$time_pass = time() - $array_status[CORESTATUS_TITLE_STARTTIME];
$data_json[PRINTERSTATE_TITLE_PASSTIME] = $time_pass;
if (isset($data_json[PRINTERSTATE_TITLE_PERCENT]) && ($time_pass >= PRINTERSTATE_VALUE_OFST_TO_CAL_TIME || $data_json[PRINTERSTATE_TITLE_PERCENT] >= PRINTERSTATE_VALUE_OFST_TO_CAL_PCT)) {
// rest time = total time - passed time
// total time = estimate time (by filament) * (1 - percentage ^ 0.5) + estimate time (by time) * percentage ^ 0.5
// estimate time (by time) = passed time / percentage
// $percentage_finish = $data_json[PRINTERSTATE_TITLE_PERCENT] / 100;
$calculate_factor = sqrt($data_json[PRINTERSTATE_TITLE_PERCENT] / 100);
$time_estimation = $array_status[CORESTATUS_TITLE_ESTIMATE_T];
$data_json[PRINTERSTATE_TITLE_DURATION] = (int) ($time_estimation * (1 - $calculate_factor) + $time_pass * (1 / $calculate_factor - 1));
}
}
// check operation
if (file_exists(PRINTERSTATE_FILE_PRINT_HEAT)) {
$print_operation = PRINTERSTATE_VALUE_PRINT_OPERATION_HEAT;
} else {
if ($data_json[PRINTERSTATE_TITLE_PERCENT] == 100) {
$print_operation = PRINTERSTATE_VALUE_PRINT_OPERATION_END;
}
}
$data_json[PRINTERSTATE_TITLE_EXTEND_PRM][PRINTERSTATE_TITLE_EXT_OPER] = $print_operation;
}
}
}
}
if ($extra_info == TRUE && $status_current == CORESTATUS_VALUE_IDLE) {
// check if we need to change idle into sliced or not
PrinterState_checkSlicedCondition($data_json);
//TODO add timelapse checking
PrinterState_checkTimelapseCondition($data_json);
}
return $data_json;
}
