/**
* @param type $p
* @return type
*/
public function inverse($p)
{
// descale and de-offset
$p->x = ($p->x - $this->x0) / $this->a;
$p->y = ($p->y - $this->y0) / $this->a;
$p->x /= $this->k0;
$p->y /= $this->k0;
if ($rho = sqrt($p->x * $p->x + $p->y * $p->y)) {
$c = 2.0 * atan2($rho, $this->R2);
$sinc = sin($c);
$cosc = cos($c);
$lat = asin($cosc * $this->sinc0 + $p->y * $sinc * $this->cosc0 / $rho);
$lon = atan2($p->x * $sinc, $rho * $this->cosc0 * $cosc - $p->y * $this->sinc0 * $sinc);
} else {
$lat = $this->phic0;
$lon = 0.0;
}
$p->x = $lon;
$p->y = $lat;
//$p = Proj4php::$proj['gauss']->inverse($p);
$p = parent::inverse($p);
// adjust longitude to CM
$p->x = Common::adjust_lon($p->x + $this->long0);
return $p;
}
public function inverse($p)
{
$x = $p->x;
$y = $p->y;
$p->x = Common::adjust_lon($this->long0 + ($x - $this->x0) / ($this->a * $this->rc));
$p->y = Common::adjust_lat($this->lat0 + ($y - $this->y0) / $this->a);
return $p;
}
public function inverse($p)
{
$p->x -= $this->x0;
$p->y -= $this->y0;
$lon = Common::adjust_lon($this->long0 + $p->x / $this->a);
$lat = 2.5 * (atan(exp(0.8 * $p->y / $this->a)) - Common::PI / 4.0);
$p->x = $lon;
$p->y = $lat;
return $p;
}
public function inverse($p)
{
$p->x -= $this->x0;
$p->y -= $this->y0;
$lat = $p->y / $this->a;
if (abs($lat) > Common::HALF_PI) {
Proj4php::reportError("equi:Inv:DataError");
}
$lon = Common::adjust_lon($this->long0 + $p->x / ($this->a * cos($this->lat0)));
$p->x = $lon;
$p->y = $lat;
}
/**
*
* @param type $p
* @return type
*/
public function inverse($p)
{
$p->x -= $this->x0;
$p->y -= $this->y0;
$rh = sqrt($p->x * $p->x + $p->y * $p->y);
if ($rh > 2.0 * Common::HALF_PI * $this->a) {
Proj4php::reportError("aeqdInvDataError");
return;
}
$z = $rh / $this->a;
$sinz = sin($z);
$cosz = cos($z);
$lon = $this->long0;
#$lat;
if (abs($rh) <= Common::EPSLN) {
$lat = $this->lat0;
} else {
$lat = Common::asinz($cosz * $this->sin_p12 + $p->y * $sinz * $this->cos_p12 / $rh);
$con = abs($this->lat0) - Common::HALF_PI;
if (abs($con) <= Common::EPSLN) {
if ($this->lat0 >= 0.0) {
$lon = Common::adjust_lon($this->long0 + atan2($p->x, -$p->y));
} else {
$lon = Common::adjust_lon($this->long0 - atan2(-$p->x, $p->y));
}
} else {
$con = $cosz - $this->sin_p12 * sin($lat);
if (abs($con) < Common::EPSLN && abs($p->x) < Common::EPSLN) {
//no-op, just keep the lon value as is
} else {
#$temp = atan2( ($p->x * $sinz * $this->cos_p12 ), ($con * $rh ) ); // $temp is unused !?!
$lon = Common::adjust_lon($this->long0 + atan2($p->x * $sinz * $this->cos_p12, $con * $rh));
}
}
}
$p->x = $lon;
$p->y = $lat;
return $p;
}
public function inverse($p)
{
$p->x -= $this->x0;
$p->y -= $this->y0;
$x = $p->x / $this->a;
$y = $p->y / $this->a;
if ($this->sphere) {
$cosz = 0.0;
#$rh;
$sinz = 0.0;
$rh = sqrt($x * $x + $y * $y);
$phi = $rh * 0.5;
if ($phi > 1.0) {
Proj4php::reportError("laea:Inv:DataError");
return null;
}
$phi = 2.0 * asin($phi);
if ($this->mode == $this->OBLIQ || $this->mode == $this->EQUIT) {
$sinz = sin($phi);
$cosz = cos($phi);
}
switch ($this->mode) {
case $this->EQUIT:
$phi = abs($rh) <= Common::EPSLN ? 0.0 : asin($y * $sinz / $rh);
$x *= $sinz;
$y = $cosz * $rh;
break;
case $this->OBLIQ:
$phi = abs($rh) <= Common::EPSLN ? $this->phi0 : asin($cosz * $this->sinph0 + $y * $sinz * $this->cosph0 / $rh);
$x *= $sinz * $this->cosph0;
$y = ($cosz - sin($phi) * $this->sinph0) * $rh;
break;
case $this->N_POLE:
$y = -$y;
$phi = Common::HALF_PI - $phi;
break;
case $this->S_POLE:
$phi -= Common::HALF_PI;
break;
}
$lam = $y == 0.0 && ($this->mode == $this->EQUIT || $this->mode == $this->OBLIQ) ? 0.0 : atan2($x, $y);
} else {
/*
$cCe;
$sCe;
$q;
$rho;
*/
$ab = 0.0;
switch ($this->mode) {
case $this->EQUIT:
case $this->OBLIQ:
$x /= $this->dd;
$y *= $this->dd;
$rho = sqrt($x * $x + $y * $y);
if ($rho < Common::EPSLN) {
$p->x = 0.0;
$p->y = $this->phi0;
return $p;
}
$sCe = 2.0 * asin(0.5 * $rho / $this->rq);
$cCe = cos($sCe);
$x *= $sCe = sin($sCe);
if ($this->mode == $this->OBLIQ) {
$ab = $cCe * $this->sinb1 + $y * $sCe * $this->cosb1 / $rho;
$q = $this->qp * $ab;
$y = $rho * $this->cosb1 * $cCe - $y * $this->sinb1 * $sCe;
} else {
$ab = $y * $sCe / $rho;
$q = $this->qp * $ab;
$y = $rho * $cCe;
}
break;
case $this->N_POLE:
$y = -$y;
case $this->S_POLE:
$q = $x * $x + $y * $y;
if (!$q) {
$p->x = 0.0;
$p->y = $this->phi0;
return $p;
}
/*
q = $this->qp - q;
*/
$ab = 1.0 - $q / $this->qp;
if ($this->mode == $this->S_POLE) {
$ab = -$ab;
}
break;
}
$lam = atan2($x, $y);
$phi = $this->authlat(asin($ab), $this->apa);
}
/*
$Rh = sqrt($p->x *$p->x +$p->y * $p->y);
$temp = Rh / (2.0 * $this->a);
if (temp > 1) {
Proj4php::reportError("laea:Inv:DataError");
return null;
}
$z = 2.0 * Common::asinz(temp);
$sin_z=sin(z);
$cos_z=cos(z);
$lon =$this->long0;
if (abs(Rh) > Common::EPSLN) {
$lat = Common::asinz($this->sin_lat_o * cos_z +$this-> cos_lat_o * sin_z *$p->y / Rh);
$temp =abs($this->lat0) - Common::HALF_PI;
if (abs(temp) > Common::EPSLN) {
temp = cos_z -$this->sin_lat_o * sin(lat);
if(temp!=0.0) lon=Common::adjust_lon($this->long0+atan2($p->x*sin_z*$this->cos_lat_o,temp*Rh));
} else if ($this->lat0 < 0.0) {
lon = Common::adjust_lon($this->long0 - atan2(-$p->x,$p->y));
} else {
lon = Common::adjust_lon($this->long0 + atan2($p->x, -$p->y));
}
} else {
lat = $this->lat0;
}
*/
//return(OK);
$p->x = Common::adjust_lon($this->long0 + $lam);
$p->y = $phi;
return $p;
}
/**
*
* @param type $p
* @return type
*/
public function inverse($p)
{
/*
$delta_lon; /* Delta longitude (Given longitude - center
$theta; /* angle
$delta_theta; /* adjusted longitude
$sin_phi;
$cos_phi; /* sin and cos value
$b; /* temporary values
$c;
$t;
$tq; /* temporary values
$con;
$n;
$ml; /* cone constant, small m
$vs;
$us;
$q;
$s;
$ts1;
$vl;
$ul;
$bs;
$dlon;
$flag;
*/
/* Inverse equations
----------------- */
$p->x -= $this->x0;
$p->y -= $this->y0;
#$flag = 0;
$vs = $p->x * $this->cosaz - $p->y * $this->sinaz;
$us = $p->y * $this->cosaz + $p->x * $this->sinaz;
$us = $us + $this->u;
$q = exp(-$this->bl * $vs / $this->al);
$s = 0.5 * ($q - 1.0 / $q);
$t = 0.5 * ($q + 1.0 / $q);
$vl = sin($this->bl * $us / $this->al);
$ul = ($vl * $this->cosgam + $s * $this->singam) / $t;
if (abs(abs($ul) - 1.0) <= Common::EPSLN) {
$lon = $this->longc;
if (ul >= 0.0) {
$lat = Common::HALF_PI;
} else {
$lat = -Common::HALF_PI;
}
} else {
$con = 1.0 / $this->bl;
$ts1 = pow($this->el / sqrt((1.0 + $ul) / (1.0 - $ul)), $con);
$lat = Common::phi2z($this->e, $ts1);
//if ($flag != 0)
//return($flag);
//~ con = cos($this->bl * us /al);
$theta = $this->longc - atan2($s * $this->cosgam - $vl * $this->singam, $con) / $this->bl;
$lon = Common::adjust_lon($theta);
}
$p->x = $lon;
$p->y = $lat;
return $p;
}
/**
* Lambert Conformal Conic inverse equations--mapping x,y to lat/long
*
* @param type $p
* @return null
*/
public function inverse($p)
{
$x = ($p->x - $this->x0) / $this->k0;
$y = $this->rh - ($p->y - $this->y0) / $this->k0;
if ($this->ns > 0) {
$rh1 = sqrt($x * $x + $y * $y);
$con = 1.0;
} else {
$rh1 = -sqrt($x * $x + $y * $y);
$con = -1.0;
}
$theta = 0.0;
if ($rh1 != 0) {
$theta = atan2($con * $x, $con * $y);
}
if ($rh1 != 0 || $this->ns > 0.0) {
$con = 1.0 / $this->ns;
$ts = pow($rh1 / ($this->a * $this->f0), $con);
$lat = Common::phi2z($this->e, $ts);
if ($lat == -9999) {
return null;
}
} else {
$lat = -Common::HALF_PI;
}
$lon = Common::adjust_lon($theta / $this->ns + $this->long0);
$p->x = $lon;
$p->y = $lat;
return $p;
}
/**
Transverse Mercator Inverse - x/y to long/lat
*/
public function inverse($p)
{
#$phi; /* temporary angles */
#$delta_phi; /* difference between longitudes */
$max_iter = 6;
/* maximun number of iterations */
if (isset($this->sphere) && $this->sphere === true) {
/* spherical form */
$f = exp($p->x / ($this->a * $this->k0));
$g = 0.5 * ($f - 1 / $f);
$temp = $this->lat0 + $p->y / ($this->a * $this->k0);
$h = cos($temp);
$con = sqrt((1.0 - $h * $h) / (1.0 + $g * $g));
$lat = Common::asinz($con);
if ($temp < 0) {
$lat = -$lat;
}
if ($g == 0 && $h == 0) {
$lon = $this->long0;
} else {
$lon = Common::adjust_lon(atan2($g, $h) + $this->long0);
}
} else {
// ellipsoidal form
$x = $p->x - $this->x0;
$y = $p->y - $this->y0;
$con = ($this->ml0 + $y / $this->k0) / $this->a;
$phi = $con;
for ($i = 0; true; $i++) {
$delta_phi = ($con + $this->e1 * sin(2.0 * $phi) - $this->e2 * sin(4.0 * $phi) + $this->e3 * sin(6.0 * $phi)) / $this->e0 - $phi;
$phi += $delta_phi;
if (abs($delta_phi) <= Common::EPSLN) {
break;
}
if ($i >= $max_iter) {
Proj4php::reportError("tmerc:inverse: Latitude failed to converge");
return 95;
}
}
// for()
if (abs($phi) < Common::HALF_PI) {
// sincos(phi, &sin_phi, &cos_phi);
$sin_phi = sin($phi);
$cos_phi = cos($phi);
$tan_phi = tan($phi);
$c = $this->ep2 * pow($cos_phi, 2);
$cs = pow($c, 2);
$t = pow($tan_phi, 2);
$ts = pow($t, 2);
$con = 1.0 - $this->es * pow($sin_phi, 2);
$n = $this->a / sqrt($con);
$r = $n * (1.0 - $this->es) / $con;
$d = $x / ($n * $this->k0);
$ds = pow($d, 2);
$lat = $phi - $n * $tan_phi * $ds / $r * (0.5 - $ds / 24.0 * (5.0 + 3.0 * $t + 10.0 * $c - 4.0 * $cs - 9.0 * $this->ep2 - $ds / 30.0 * (61.0 + 90.0 * $t + 298.0 * $c + 45.0 * $ts - 252.0 * $this->ep2 - 3.0 * $cs)));
$lon = Common::adjust_lon($this->long0 + $d * (1.0 - $ds / 6.0 * (1.0 + 2.0 * $t + $c - $ds / 20.0 * (5.0 - 2.0 * $c + 28.0 * $t - 3.0 * $cs + 8.0 * $this->ep2 + 24.0 * $ts))) / $cos_phi);
} else {
$lat = Common::HALF_PI * Common::sign($y);
$lon = $this->long0;
}
}
$p->x = $lon;
$p->y = $lat;
return $p;
}
/**
* Stereographic inverse equations--mapping x,y to lat/long
*
* @param type $p
* @return type
*/
public function inverse($p)
{
$x = ($p->x - $this->x0) / $this->a;
/* descale and de-offset */
$y = ($p->y - $this->y0) / $this->a;
/*
$lon;
$lat;
$cosphi;
$sinphi;
$rho;
$tp = 0.0;
$phi_l = 0.0;
$i;
*/
$halfe = 0.0;
$pi2 = 0.0;
if ($this->sphere) {
/*
$c;
$rh;
$sinc;
$cosc;
*/
$rh = sqrt($x * $x + $y * $y);
$c = 2.0 * atan($rh / $this->akm1);
$sinc = sin($c);
$cosc = cos($c);
$lon = 0.0;
switch ($this->mode) {
case $this->EQUIT:
if (abs($rh) <= Common::EPSLN) {
$lat = 0.0;
} else {
$lat = asin($y * $sinc / $rh);
}
if ($cosc != 0.0 || $x != 0.0) {
$lon = atan2($x * $sinc, $cosc * $rh);
}
break;
case $this->OBLIQ:
if (abs($rh) <= Common::EPSLN) {
$lat = $this->phi0;
} else {
$lat = asin($cosc * $this->sinph0 + $y * $sinc * $this->cosph0 / $rh);
}
$c = $cosc - $this->sinph0 * sin($lat);
if ($c != 0.0 || $x != 0.0) {
$lon = atan2($x * $sinc * $this->cosph0, $c * $rh);
}
break;
case $this->N_POLE:
$y = -$y;
case $this->S_POLE:
if (abs($rh) <= Common::EPSLN) {
$lat = $this->phi0;
} else {
$lat = asin($this->mode == $this->S_POLE ? -$cosc : $cosc);
}
$lon = $x == 0.0 && $y == 0.0 ? 0.0 : atan2($x, $y);
break;
}
$p->x = Common::adjust_lon($lon + $this->long0);
$p->y = $lat;
} else {
$rho = sqrt($x * $x + $y * $y);
switch ($this->mode) {
case $this->OBLIQ:
case $this->EQUIT:
$tp = 2.0 * atan2($rho * $this->cosX1, $this->akm1);
$cosphi = cos($tp);
$sinphi = sin($tp);
if ($rho == 0.0) {
$phi_l = asin($cosphi * $this->sinX1);
} else {
$phi_l = asin($cosphi * $this->sinX1 + $y * $sinphi * $this->cosX1 / $rho);
}
$tp = tan(0.5 * (Common::HALF_PI + $phi_l));
$x *= $sinphi;
$y = $rho * $this->cosX1 * $cosphi - $y * $this->sinX1 * $sinphi;
$pi2 = Common::HALF_PI;
$halfe = 0.5 * $this->e;
break;
case $this->N_POLE:
$y = -$y;
case $this->S_POLE:
$tp = -$rho / $this->akm1;
$phi_l = Common::HALF_PI - 2.0 * atan($tp);
$pi2 = -Common::HALF_PI;
$halfe = -0.5 * $this->e;
break;
}
for ($i = $this->NITER; $i--; $phi_l = $lat) {
//check this
$sinphi = $this->e * sin($phi_l);
$lat = 2.0 * atan($tp * pow((1.0 + $sinphi) / (1.0 - $sinphi), $halfe)) - $pi2;
if (abs(phi_l - lat) < $this->CONV) {
if ($this->mode == $this->S_POLE) {
$lat = -$lat;
}
$lon = $x == 0.0 && $y == 0.0 ? 0.0 : atan2($x, $y);
$p->x = Common::adjust_lon($lon + $this->long0);
$p->y = $lat;
return $p;
}
}
}
}
/**
*
* @param type $p
* @return type
*/
public function inverse($p)
{
#$lat;
#$temp;
#$lon;
/* Inverse equations
----------------- */
$p->x -= $this->x0;
$p->y -= $this->y0;
$lat = $p->y / $this->a;
if (isset($this->sphere)) {
$p->y /= $this->C_y;
$lat = $this->m ? asin(($this->m * $p->y + sin($p->y)) / $this->n) : ($this->n != 1.0 ? asin(sin($p->y) / $this->n) : $p->y);
$lon = $p->x / ($this->C_x * ($this->m + cos($p->y)));
} else {
$lat = Common::pj_inv_mlfn($p->y / $this->a, $this->es, $this->en);
$s = abs($lat);
if ($s < Common::HALF_PI) {
$s = sin($lat);
$temp = $this->long0 + $p->x * sqrt(1.0 - $this->es * $s * $s) / ($this->a * cos($lat));
//temp = $this->long0 + $p->x / ($this->a * cos($lat));
$lon = Common::adjust_lon($temp);
} else {
if ($s - Common::EPSLN < Common::HALF_PI) {
$lon = $this->long0;
}
}
}
$p->x = $lon;
$p->y = $lat;
return $p;
}
public function inverse($p)
{
/*
$dlon;
$xx;
$yy;
$xys;
$c1;
$c2;
$c3;
$al;
$asq;
$a1;
$m1;
$con;
$th1;
$d;
*/
/* inverse equations
----------------- */
$p->x -= $this->x0;
$p->y -= $this->y0;
$con = Common::PI * $this->R;
$xx = $p->x / $con;
$yy = $p->y / $con;
$xys = $xx * $xx + $yy * $yy;
$c1 = -abs($yy) * (1.0 + $xys);
$c2 = $c1 - 2.0 * $yy * $yy + $xx * $xx;
$c3 = -2.0 * $c1 + 1.0 + 2.0 * $yy * $yy + $xys * $xys;
$d = $yy * $yy / $c3 + (2.0 * $c2 * $c2 * $c2 / $c3 / $c3 / $c3 - 9.0 * $c1 * $c2 / $c3 / $c3) / 27.0;
$a1 = ($c1 - $c2 * $c2 / 3.0 / $c3) / $c3;
$m1 = 2.0 * sqrt(-$a1 / 3.0);
$con = 3.0 * $d / $a1 / $m1;
if (abs($con) > 1.0) {
if ($con >= 0.0) {
$con = 1.0;
} else {
$con = -1.0;
}
}
$th1 = acos($con) / 3.0;
if ($p->{$y} >= 0) {
$lat = (-$m1 * cos($th1 + Common::PI / 3.0) - $c2 / 3.0 / $c3) * Common::PI;
} else {
$lat = -(-m1 * cos($th1 + Common::PI / 3.0) - $c2 / 3.0 / $c3) * Common::PI;
}
if (abs($xx) < Common::EPSLN) {
$lon = $this->{$long0};
}
$lon = Common::adjust_lon($this->long0 + Common::PI * ($xys - 1.0 + sqrt(1.0 + 2.0 * ($xx * $xx - $yy * $yy) + $xys * $xys)) / 2.0 / $xx);
$p->x = $lon;
$p->y = $lat;
return $p;
}
/**
*
* @param type $p
* @return type
*/
public function inverse($p)
{
#$theta;
#$arg;
/* Inverse equations
----------------- */
$p->x -= $this->x0;
//~ $p->y -= $this->y0;
$arg = $p->y / (1.4142135623731 * $this->a);
/* Because of division by zero problems, 'arg' can not be 1.0. Therefore
a number very close to one is used instead.
------------------------------------------------------------------- */
if (abs($arg) > 0.999999999999) {
$arg = 0.999999999999;
}
$theta = asin($arg);
$lon = Common::adjust_lon($this->long0 + $p->x / (0.900316316158 * $this->a * cos($theta)));
if ($lon < -Common::PI) {
$lon = -Common::PI;
}
if ($lon > Common::PI) {
$lon = Common::PI;
}
$arg = (2.0 * $theta + sin(2.0 * $theta)) / Common::PI;
if (abs($arg) > 1.0) {
$arg = 1.0;
}
$lat = asin($arg);
//return(OK);
$p->x = $lon;
$p->y = $lat;
return $p;
}
/**
*
* @param type $p
* @return type
*/
public function inverse($p)
{
/*
$rh; // height above ellipsoid
$z; // angle
$sinz;
$cosz; // sin of z and cos of z
$temp;
$con;
$lon;
$lat;
*/
/* Inverse equations
----------------- */
$p->x -= $this->x0;
$p->y -= $this->y0;
$rh = sqrt($p->x * $p->x + $p->y * $p->y);
if ($rh > $this->a + 1.0E-7) {
Proj4php::reportError("orthoInvDataError");
}
$z = Common::asinz($rh / $this->a);
$sinz = sin($z);
$cosz = cos($z);
$lon = $this->long0;
if (abs($rh) <= Common::EPSLN) {
$lat = $this->lat0;
}
$lat = Common::asinz($cosz * $this->sin_p14 + $p->y * $sinz * $this->cos_p14 / $rh);
$con = abs($this->lat0) - Common::HALF_PI;
if (abs(con) <= Common::EPSLN) {
if ($this->lat0 >= 0) {
$lon = Common::adjust_lon($this->long0 + atan2($p->x, -$p->y));
} else {
$lon = Common::adjust_lon($this->long0 - atan2(-$p->x, $p->y));
}
}
$con = $cosz - $this->sin_p14 * sin($lat);
$p->x = $lon;
$p->y = $lat;
return $p;
}
/**
* ellipsoid
* calculate xy from lat/lon
* Constants, identical to inverse transform function
*
* @param type $p
* @return type
*/
public function forward($p)
{
$lon = $p->x;
$lat = $p->y;
$delta_lon = Common::adjust_lon($lon - $this->long0);
// Delta longitude
/* Transformation */
$gfi = pow((1.0 + $this->e * sin($lat)) / (1.0 - $this->e * sin($lat)), $this->alfa * $this->e / 2.0);
$u = 2.0 * (atan($this->k * pow(tan($lat / 2.0 + $this->s45), $this->alfa) / $gfi) - $this->s45);
$deltav = -$delta_lon * $this->alfa;
$s = asin(cos($this->ad) * sin($u) + sin($this->ad) * cos($u) * cos($deltav));
$d = asin(cos($u) * sin($deltav) / cos($s));
$eps = $this->n * $d;
$ro = $this->ro0 * pow(tan($this->s0 / 2.0 + $this->s45), $this->n) / pow(tan($s / 2.0 + $this->s45), $this->n);
/* x and y are reverted! */
//$p->y = ro * cos(eps) / a;
//$p->x = ro * sin(eps) / a;
$p->y = $ro * cos($eps) / 1.0;
$p->x = $ro * sin($eps) / 1.0;
if ($this->czech) {
$p->y *= -1.0;
$p->x *= -1.0;
}
return $p;
}
public function inverse($p)
{
$p->x -= $this->x0;
$p->y = $this->rh - $p->y + $this->y0;
if ($this->ns >= 0) {
$rh1 = sqrt($p->x * $p->x + $p->y * $p->y);
$con = 1.0;
} else {
$rh1 = -sqrt($p->x * $p->x + $p->y * $p->y);
$con = -1.0;
}
$theta = 0.0;
if ($rh1 != 0.0) {
$theta = atan2($con * $p->x, $con * $p->y);
}
$ml = $this->g - $rh1 / $this->a;
$lat = $this->phi3z($ml, $this->e0, $this->e1, $this->e2, $this->e3);
$lon = Common::adjust_lon($this->long0 + $theta / $this->ns);
$p->x = $lon;
$p->y = $lat;
return $p;
}
/**
*
* @param Point $p
* @return Point $p
*/
public function inverse($p)
{
$p->x -= $this->x0;
$p->y = $this->rh - $p->y + $this->y0;
if ($this->ns0 >= 0) {
$rh1 = sqrt($p->x * $p->x + $p->y * $p->y);
$con = 1.0;
} else {
$rh1 = -sqrt($p->x * $p->x + $p->y * $p->y);
$con = -1.0;
}
$theta = 0.0;
if ($rh1 != 0.0) {
$theta = atan2($con * $p->x, $con * $p->y);
}
$con = $rh1 * $this->ns0 / $this->a;
$qs = ($this->c - $con * $con) / $this->ns0;
if ($this->e3 >= 1.0E-10) {
$con = 1 - 0.5 * (1.0 - $this->es) * log((1.0 - $this->e3) / (1.0 + $this->e3)) / $this->e3;
if (abs(abs($con) - abs($qs)) > 1.0E-10) {
$lat = $this->phi1z($this->e3, $qs);
} else {
if ($qs >= 0) {
$lat = 0.5 * Common::PI;
} else {
$lat = -0.5 * Common::PI;
}
}
} else {
$lat = $this->phi1z($this->e3, $qs);
}
$lon = Common::adjust_lon($theta / $this->ns0 + $this->long0);
$p->x = $lon;
$p->y = $lat;
return $p;
}
/**
* Cylindrical Equal Area inverse equations--mapping x,y to lat/long
*
* @param type $p
* @return type
*/
public function inverse($p)
{
$p->x -= $this->x0;
$p->y -= $this->y0;
$p->x = Common::adjust_lon($this->long0 + $p->x / $this->a / cos($this->lat_ts));
$p->y = asin($p->y / $this->a * cos($this->lat_ts));
return $p;
}
/**
*
* @param type $p
* @return type
*/
public function inverse($p)
{
/*
$rh; // Rho
$z; // angle
$sinc;
$cosc;
$c;
$lon;
$lat;
*/
/* Inverse equations
----------------- */
$p->x = ($p->x - $this->x0) / $this->a;
$p->y = ($p->y - $this->y0) / $this->a;
$p->x /= $this->k0;
$p->y /= $this->k0;
if ($rh = sqrt($p->x * $p->x + $p->y * $p->y)) {
$c = atan2($rh, $this->rc);
$sinc = sin($c);
$cosc = cos($c);
$lat = Common::asinz($cosc * $this->sin_p14 + $p->y * $sinc * $this->cos_p14 / $rh);
$lon = atan2($p->x * sinc, rh * $this->cos_p14 * $cosc - $p->y * $this->sin_p14 * $sinc);
$lon = Common::adjust_lon($this->long0 + $lon);
} else {
$lat = $this->phic0;
$lon = 0.0;
}
$p->x = $lon;
$p->y = $lat;
return $p;
}
public function inverse($p)
{
$x = $p->x - $this->x0;
$y = $p->y - $this->y0;
if ($this->sphere) {
$lat = Common::HALF_PI - 2.0 * atan(exp(-$y / $this->a * $this->k0));
} else {
$ts = exp(-$y / ($this->a * $this->k0));
$lat = Common::phi2z($this->e, $ts);
if ($lat == -9999) {
Proj4php::reportError("merc:inverse: lat = -9999");
return null;
}
}
$lon = Common::adjust_lon($this->long0 + $x / ($this->a * $this->k0));
$p->x = $lon;
$p->y = $lat;
return $p;
}
public function inverse($p)
{
$p->x -= $this->x0;
$p->y -= $this->y0;
$x = $p->x / $this->a;
$y = $p->y / $this->a;
if ($this->sphere) {
$this->dd = $y + $this->lat0;
$phi = asin(sin($this->dd) * cos($x));
$lam = atan2(tan($x), cos($this->dd));
} else {
// ellipsoid
$ph1 = Common::pj_inv_mlfn($this->m0 + $y, $this->es, $this->en);
$this->tn = tan($ph1);
$this->t = $this->tn * $this->tn;
$this->n = sin($ph1);
$this->r = 1.0 / (1.0 - $this->es * $this->n * $this->n);
$this->n = sqrt($this->r);
$this->r *= (1.0 - $this->es) * $this->n;
$this->dd = $x / $this->n;
$this->d2 = $this->dd * $this->dd;
$phi = $ph1 - $this->n * $this->tn / $this->r * $this->d2 * (0.5 - (1.0 + 3.0 * $this->t) * $this->d2 * $this->C3);
$lam = $this->dd * (1.0 + $this->t * $this->d2 * (-$this->C4 + (1.0 + 3.0 * $this->t) * $this->d2 * $this->C5)) / cos($ph1);
}
$p->x = Common::adjust_lon($this->long0 + $lam);
$p->y = $phi;
return $p;
}
public function inverse($p)
{
/*
$sin_phi;
$cos_phi; // sin and cos values
$al; // temporary values
$b; // temporary values
$c; // temporary values
$con;
$ml; // cone constant, small m
$iflg; // error flag
$lon;
$lat;
*/
$p->x -= $this->x0;
$p->y -= $this->y0;
$al = $this->ml0 + $p->y / $this->a;
$iflg = 0;
if (abs($al) <= 1.0E-7) {
$lon = $p->x / $this->a + $this->long0;
$lat = 0.0;
} else {
$b = $al * $al + $p->x / $this->a * ($p->x / $this->a);
$iflg = phi4z($this->es, $this->e0, $this->e1, $this->e2, $this->e3, $this->al, $b, $c, $lat);
if ($iflg != 1) {
return $iflg;
}
$lon = Common::adjust_lon(Common::asinz($p->x * $c / $this->a) / sin($lat) + $this->long0);
}
$p->x = $lon;
$p->y = $lat;
return $p;
}