/**
* Handles the Settings command
*
* @param int $commandCode
*
* @access public
* @return boolean
*/
public function Handle($commandCode)
{
if (!self::$decoder->getElementStartTag(SYNC_SETTINGS_SETTINGS)) {
return false;
}
//save the request parameters
$request = array();
// Loop through properties. Possible are:
// - Out of office
// - DevicePassword
// - DeviceInformation
// - UserInformation
// Each of them should only be once per request. Each property must be processed in order.
while (1) {
$propertyName = "";
if (self::$decoder->getElementStartTag(SYNC_SETTINGS_OOF)) {
$propertyName = SYNC_SETTINGS_OOF;
}
if (self::$decoder->getElementStartTag(SYNC_SETTINGS_DEVICEPW)) {
$propertyName = SYNC_SETTINGS_DEVICEPW;
}
if (self::$decoder->getElementStartTag(SYNC_SETTINGS_DEVICEINFORMATION)) {
$propertyName = SYNC_SETTINGS_DEVICEINFORMATION;
}
if (self::$decoder->getElementStartTag(SYNC_SETTINGS_USERINFORMATION)) {
$propertyName = SYNC_SETTINGS_USERINFORMATION;
}
//TODO - check if it is necessary
//no property name available - break
if (!$propertyName) {
break;
}
//the property name is followed by either get or set
if (self::$decoder->getElementStartTag(SYNC_SETTINGS_GET)) {
//get is only available for OOF and user information
switch ($propertyName) {
case SYNC_SETTINGS_OOF:
$oofGet = new SyncOOF();
$oofGet->Decode(self::$decoder);
if (!self::$decoder->getElementEndTag()) {
return false;
}
// SYNC_SETTINGS_GET
break;
case SYNC_SETTINGS_USERINFORMATION:
$userInformation = new SyncUserInformation();
break;
default:
//TODO: a special status code needed?
ZLog::Write(LOGLEVEL_WARN, sprintf("This property ('%s') is not allowed to use get in request", $propertyName));
}
} elseif (self::$decoder->getElementStartTag(SYNC_SETTINGS_SET)) {
//set is available for OOF, device password and device information
switch ($propertyName) {
case SYNC_SETTINGS_OOF:
$oofSet = new SyncOOF();
$oofSet->Decode(self::$decoder);
//TODO check - do it after while(1) finished?
break;
case SYNC_SETTINGS_DEVICEPW:
//TODO device password
$devicepassword = new SyncDevicePassword();
$devicepassword->Decode(self::$decoder);
break;
case SYNC_SETTINGS_DEVICEINFORMATION:
$deviceinformation = new SyncDeviceInformation();
$deviceinformation->Decode(self::$decoder);
self::$deviceManager->SaveDeviceInformation($deviceinformation);
break;
default:
//TODO: a special status code needed?
ZLog::Write(LOGLEVEL_WARN, sprintf("This property ('%s') is not allowed to use set in request", $propertyName));
}
if (!self::$decoder->getElementEndTag()) {
return false;
}
// SYNC_SETTINGS_SET
} else {
ZLog::Write(LOGLEVEL_WARN, sprintf("Neither get nor set found for property '%s'", $propertyName));
return false;
}
if (!self::$decoder->getElementEndTag()) {
return false;
}
// SYNC_SETTINGS_OOF or SYNC_SETTINGS_DEVICEPW or SYNC_SETTINGS_DEVICEINFORMATION or SYNC_SETTINGS_USERINFORMATION
//break if it reached the endtag
$e = self::$decoder->peek();
if ($e[EN_TYPE] == EN_TYPE_ENDTAG) {
self::$decoder->getElementEndTag();
//SYNC_SETTINGS_SETTINGS
break;
}
}
$status = SYNC_SETTINGSSTATUS_SUCCESS;
//TODO put it in try catch block
//TODO implement Settings in the backend
//TODO save device information in device manager
//TODO status handling
// $data = self::$backend->Settings($request);
self::$encoder->startWBXML();
self::$encoder->startTag(SYNC_SETTINGS_SETTINGS);
self::$encoder->startTag(SYNC_SETTINGS_STATUS);
self::$encoder->content($status);
self::$encoder->endTag();
//SYNC_SETTINGS_STATUS
//get oof settings
if (isset($oofGet)) {
$oofGet = self::$backend->Settings($oofGet);
self::$encoder->startTag(SYNC_SETTINGS_OOF);
self::$encoder->startTag(SYNC_SETTINGS_STATUS);
self::$encoder->content($oofGet->Status);
self::$encoder->endTag();
//SYNC_SETTINGS_STATUS
self::$encoder->startTag(SYNC_SETTINGS_GET);
$oofGet->Encode(self::$encoder);
self::$encoder->endTag();
//SYNC_SETTINGS_GET
self::$encoder->endTag();
//SYNC_SETTINGS_OOF
}
//get user information
//TODO none email address found
if (isset($userInformation)) {
self::$backend->Settings($userInformation);
self::$encoder->startTag(SYNC_SETTINGS_USERINFORMATION);
self::$encoder->startTag(SYNC_SETTINGS_STATUS);
self::$encoder->content($userInformation->Status);
self::$encoder->endTag();
//SYNC_SETTINGS_STATUS
self::$encoder->startTag(SYNC_SETTINGS_GET);
$userInformation->Encode(self::$encoder);
self::$encoder->endTag();
//SYNC_SETTINGS_GET
self::$encoder->endTag();
//SYNC_SETTINGS_USERINFORMATION
}
//set out of office
if (isset($oofSet)) {
$oofSet = self::$backend->Settings($oofSet);
self::$encoder->startTag(SYNC_SETTINGS_OOF);
self::$encoder->startTag(SYNC_SETTINGS_SET);
self::$encoder->startTag(SYNC_SETTINGS_STATUS);
self::$encoder->content($oofSet->Status);
self::$encoder->endTag();
//SYNC_SETTINGS_STATUS
self::$encoder->endTag();
//SYNC_SETTINGS_SET
self::$encoder->endTag();
//SYNC_SETTINGS_OOF
}
//set device passwort
if (isset($devicepassword)) {
self::$encoder->startTag(SYNC_SETTINGS_DEVICEPW);
self::$encoder->startTag(SYNC_SETTINGS_SET);
self::$encoder->startTag(SYNC_SETTINGS_STATUS);
self::$encoder->content($devicepassword->Status);
self::$encoder->endTag();
//SYNC_SETTINGS_STATUS
self::$encoder->endTag();
//SYNC_SETTINGS_SET
self::$encoder->endTag();
//SYNC_SETTINGS_DEVICEPW
}
//set device information
if (isset($deviceinformation)) {
self::$encoder->startTag(SYNC_SETTINGS_DEVICEINFORMATION);
self::$encoder->startTag(SYNC_SETTINGS_SET);
self::$encoder->startTag(SYNC_SETTINGS_STATUS);
self::$encoder->content($deviceinformation->Status);
self::$encoder->endTag();
//SYNC_SETTINGS_STATUS
self::$encoder->endTag();
//SYNC_SETTINGS_SET
self::$encoder->endTag();
//SYNC_SETTINGS_DEVICEINFORMATION
}
self::$encoder->endTag();
//SYNC_SETTINGS_SETTINGS
return true;
}
/**
* Handles the Settings command
*
* @param int $commandCode
*
* @access public
* @return boolean
*/
public function Handle($commandCode)
{
if (!self::$decoder->getElementStartTag(SYNC_SETTINGS_SETTINGS)) {
return false;
}
// add capability header for KOE
if (self::$deviceManager->IsKoe()) {
// define the supported capabilites
$cap = array();
if (defined('KOE_CAPABILITY_GAB') && KOE_CAPABILITY_GAB) {
$cap[] = "gab";
}
if (defined('KOE_CAPABILITY_RECEIVEFLAGS') && KOE_CAPABILITY_RECEIVEFLAGS) {
$cap[] = "receiveflags";
}
if (defined('KOE_CAPABILITY_SENDFLAGS') && KOE_CAPABILITY_SENDFLAGS) {
$cap[] = "sendflags";
}
if (defined('KOE_CAPABILITY_OOFTIMES') && KOE_CAPABILITY_OOFTIMES) {
$cap[] = "ooftime";
} elseif (defined('KOE_CAPABILITY_OOF') && KOE_CAPABILITY_OOF) {
$cap[] = "oof";
}
// 'ooftime' superseeds 'oof'. If 'ooftime' is set, 'oof' should not be defined.
if (defined('KOE_CAPABILITY_NOTES') && KOE_CAPABILITY_NOTES) {
$cap[] = "notes";
}
if (defined('KOE_CAPABILITY_SHAREDFOLDER') && KOE_CAPABILITY_SHAREDFOLDER) {
$cap[] = "sharedfolder";
}
if (defined('KOE_CAPABILITY_SENDAS') && KOE_CAPABILITY_SENDAS) {
$cap[] = "sendas";
}
self::$specialHeaders = array();
self::$specialHeaders[] = "X-Push-Capabilities: " . implode(",", $cap);
self::$specialHeaders[] = "X-Push-GAB-Name: " . bin2hex(KOE_GAB_NAME);
}
//save the request parameters
$request = array();
// Loop through properties. Possible are:
// - Out of office
// - DevicePassword
// - DeviceInformation
// - UserInformation
// Each of them should only be once per request. Each property must be processed in order.
WBXMLDecoder::ResetInWhile("settingsMain");
while (WBXMLDecoder::InWhile("settingsMain")) {
$propertyName = "";
if (self::$decoder->getElementStartTag(SYNC_SETTINGS_OOF)) {
$propertyName = SYNC_SETTINGS_OOF;
}
if (self::$decoder->getElementStartTag(SYNC_SETTINGS_DEVICEPW)) {
$propertyName = SYNC_SETTINGS_DEVICEPW;
}
if (self::$decoder->getElementStartTag(SYNC_SETTINGS_DEVICEINFORMATION)) {
$propertyName = SYNC_SETTINGS_DEVICEINFORMATION;
}
if (self::$decoder->getElementStartTag(SYNC_SETTINGS_USERINFORMATION)) {
$propertyName = SYNC_SETTINGS_USERINFORMATION;
}
//TODO - check if it is necessary
//no property name available - break
if (!$propertyName) {
break;
}
//the property name is followed by either get or set
if (self::$decoder->getElementStartTag(SYNC_SETTINGS_GET)) {
//get is only available for OOF and user information
switch ($propertyName) {
case SYNC_SETTINGS_OOF:
$oofGet = new SyncOOF();
$oofGet->Decode(self::$decoder);
if (!self::$decoder->getElementEndTag()) {
return false;
}
// SYNC_SETTINGS_GET
break;
case SYNC_SETTINGS_USERINFORMATION:
$userInformation = new SyncUserInformation();
break;
default:
//TODO: a special status code needed?
ZLog::Write(LOGLEVEL_WARN, sprintf("This property ('%s') is not allowed to use get in request", $propertyName));
}
} elseif (self::$decoder->getElementStartTag(SYNC_SETTINGS_SET)) {
//set is available for OOF, device password and device information
switch ($propertyName) {
case SYNC_SETTINGS_OOF:
$oofSet = new SyncOOF();
$oofSet->Decode(self::$decoder);
//TODO check - do it after while(1) finished?
break;
case SYNC_SETTINGS_DEVICEPW:
//TODO device password
$devicepassword = new SyncDevicePassword();
$devicepassword->Decode(self::$decoder);
break;
case SYNC_SETTINGS_DEVICEINFORMATION:
$deviceinformation = new SyncDeviceInformation();
$deviceinformation->Decode(self::$decoder);
$deviceinformation->Status = SYNC_SETTINGSSTATUS_SUCCESS;
self::$deviceManager->SaveDeviceInformation($deviceinformation);
break;
default:
//TODO: a special status code needed?
ZLog::Write(LOGLEVEL_WARN, sprintf("This property ('%s') is not allowed to use set in request", $propertyName));
}
if (!self::$decoder->getElementEndTag()) {
return false;
}
// SYNC_SETTINGS_SET
} else {
ZLog::Write(LOGLEVEL_WARN, sprintf("Neither get nor set found for property '%s'", $propertyName));
return false;
}
if (!self::$decoder->getElementEndTag()) {
return false;
}
// SYNC_SETTINGS_OOF or SYNC_SETTINGS_DEVICEPW or SYNC_SETTINGS_DEVICEINFORMATION or SYNC_SETTINGS_USERINFORMATION
//break if it reached the endtag
$e = self::$decoder->peek();
if ($e[EN_TYPE] == EN_TYPE_ENDTAG) {
self::$decoder->getElementEndTag();
//SYNC_SETTINGS_SETTINGS
break;
}
}
$status = SYNC_SETTINGSSTATUS_SUCCESS;
//TODO put it in try catch block
//TODO implement Settings in the backend
//TODO save device information in device manager
//TODO status handling
// $data = self::$backend->Settings($request);
self::$encoder->startWBXML();
self::$encoder->startTag(SYNC_SETTINGS_SETTINGS);
self::$encoder->startTag(SYNC_SETTINGS_STATUS);
self::$encoder->content($status);
self::$encoder->endTag();
//SYNC_SETTINGS_STATUS
//get oof settings
if (isset($oofGet)) {
$oofGet = self::$backend->Settings($oofGet);
self::$encoder->startTag(SYNC_SETTINGS_OOF);
self::$encoder->startTag(SYNC_SETTINGS_STATUS);
self::$encoder->content($oofGet->Status);
self::$encoder->endTag();
//SYNC_SETTINGS_STATUS
self::$encoder->startTag(SYNC_SETTINGS_GET);
$oofGet->Encode(self::$encoder);
self::$encoder->endTag();
//SYNC_SETTINGS_GET
self::$encoder->endTag();
//SYNC_SETTINGS_OOF
}
//get user information
//TODO none email address found
if (isset($userInformation)) {
self::$backend->Settings($userInformation);
self::$encoder->startTag(SYNC_SETTINGS_USERINFORMATION);
self::$encoder->startTag(SYNC_SETTINGS_STATUS);
self::$encoder->content($userInformation->Status);
self::$encoder->endTag();
//SYNC_SETTINGS_STATUS
self::$encoder->startTag(SYNC_SETTINGS_GET);
$userInformation->Encode(self::$encoder);
self::$encoder->endTag();
//SYNC_SETTINGS_GET
self::$encoder->endTag();
//SYNC_SETTINGS_USERINFORMATION
}
//set out of office
if (isset($oofSet)) {
$oofSet = self::$backend->Settings($oofSet);
self::$encoder->startTag(SYNC_SETTINGS_OOF);
self::$encoder->startTag(SYNC_SETTINGS_STATUS);
self::$encoder->content($oofSet->Status);
self::$encoder->endTag();
//SYNC_SETTINGS_STATUS
self::$encoder->endTag();
//SYNC_SETTINGS_OOF
}
//set device passwort
if (isset($devicepassword)) {
self::$encoder->startTag(SYNC_SETTINGS_DEVICEPW);
self::$encoder->startTag(SYNC_SETTINGS_SET);
self::$encoder->startTag(SYNC_SETTINGS_STATUS);
self::$encoder->content($devicepassword->Status);
self::$encoder->endTag();
//SYNC_SETTINGS_STATUS
self::$encoder->endTag();
//SYNC_SETTINGS_SET
self::$encoder->endTag();
//SYNC_SETTINGS_DEVICEPW
}
//set device information
if (isset($deviceinformation)) {
self::$encoder->startTag(SYNC_SETTINGS_DEVICEINFORMATION);
self::$encoder->startTag(SYNC_SETTINGS_STATUS);
self::$encoder->content($deviceinformation->Status);
self::$encoder->endTag();
//SYNC_SETTINGS_STATUS
self::$encoder->endTag();
//SYNC_SETTINGS_DEVICEINFORMATION
}
self::$encoder->endTag();
//SYNC_SETTINGS_SETTINGS
return true;
}