public function branch()
{
$url = $this->input->post('url');
if ($url) {
if (FALSE !== @file_get_contents($url) || $this->input->post('force')) {
$cr = 0;
$this->load->helper('errorcode');
if ($this->input->post('permanent')) {
$ret_val = 0;
$output = array();
exec('sudo ' . $this->config->item('siteutil') . ' upgrade_url "' . $url . '"', $output, $ret_val);
if ($ret_val != ERROR_NORMAL_RC_OK) {
$cr = ERROR_WRONG_PRM;
} else {
$cr = ERROR_OK;
}
} else {
$this->load->helper('zimapi');
$cr = ZimAPI_setUpgradeMode('change', $url);
}
$this->load->library('parser');
$this->output->set_status_header($cr, MyERRMSG($cr));
$this->parser->parse('plaintxt', array('display' => MyERRMSG($cr)));
}
} else {
//TODO change load view into parser?
$this->load->helper('form');
$this->load->view('template/branch_switch');
}
return;
}
public function set()
{
$parameter = NULL;
$cr = 0;
$this->load->helper(array('printerstate', 'zimapi', 'slicer'));
$parameter = $this->input->get('p');
//return false if missing
if ($parameter) {
switch ($parameter) {
case PRINTERSTATE_PRM_EXTRUDER:
$api_prm = $this->input->get('v');
if ($api_prm) {
// refuse getting data not existed for mono extruder
if ($api_prm == 'l' && $this->config->item('nb_extruder') == 1) {
$cr = ERROR_WRONG_PRM;
} else {
$cr = PrinterState_setExtruder($api_prm);
}
} else {
$cr = ERROR_MISS_PRM;
}
break;
case PRINTERSTATE_PRM_TEMPER:
// check which temperature we want
$val_temper = 0;
$api_prm = NULL;
$val_temper = $this->input->get('v');
$has_e = $this->input->get('e');
$has_h = $this->input->get('h');
if ($has_e === FALSE && $has_h === FALSE) {
$cr = ERROR_MISS_PRM;
} else {
if (!($has_e === FALSE) && !($has_h === FALSE)) {
$cr = ERROR_WRONG_PRM;
} else {
$api_prm = $has_e === FALSE ? 'h' : 'e';
$cr = PrinterState_setTemperature($val_temper, $api_prm);
}
}
break;
case PRINTERSTATE_PRM_ACCELERATION:
$val_acceleration = (int) $this->input->get('v');
if ($val_acceleration) {
$cr = PrinterState_setAcceleration($val_acceleration);
} else {
$cr = ERROR_MISS_PRM;
}
break;
case PRINTERSTATE_PRM_SPEED_MOVE:
case PRINTERSTATE_PRM_SPEED_EXTRUDE:
$val_speed = (int) $this->input->get('v');
if ($val_speed) {
$cr = PrinterState_setSpeed($val_speed);
} else {
$cr = ERROR_MISS_PRM;
}
break;
case PRINTERSTATE_PRM_COLDEXTRUSION:
$this->_return_under_construction();
return;
break;
case PRINTERSTATE_PRM_STRIPLED:
$status_set = $this->input->get('v');
if ($status_set) {
$cr = PrinterState_setStripLed($status_set);
} else {
$cr = ERROR_MISS_PRM;
}
break;
case PRINTERSTATE_PRM_MOTOR_OFF:
$status_set = $this->input->get('v');
if ($status_set == 'off') {
$cr = PrinterState_disableSteppers();
} else {
if ($status_set) {
$cr = ERROR_WRONG_PRM;
} else {
$cr = ERROR_MISS_PRM;
}
}
break;
case PRINTERSTATE_PRM_HEADLED:
$status_set = $this->input->get('v');
if ($status_set) {
$cr = PrinterState_setHeadLed($status_set);
} else {
$cr = ERROR_MISS_PRM;
}
break;
case PRINTERSTATE_PRM_OFFSET:
$axis = $this->input->get('axis');
$val_offset = $this->input->get('adjustment');
if ($axis && $val_offset !== FALSE) {
$cr = PrinterState_setOffset(array($axis => $val_offset));
} else {
$cr = ERROR_MISS_PRM;
}
break;
case ZIMAPI_PRM_PASSWD:
$old_password = $this->input->get('o');
$password = $this->input->get('v');
if (ZimAPI_checkCameraPassword($old_password)) {
if (ZimAPI_setCameraPassword($password)) {
$cr = ERROR_OK;
} else {
$cr = ERROR_INTERNAL;
}
} else {
$cr = ERROR_WRONG_PWD;
}
break;
case ZIMAPI_PRM_VIDEO_MODE:
$set_status = $this->input->get('v');
$password = $this->input->get('s');
$parameter = $this->input->get('m');
if (!ZimAPI_checkCameraPassword($password)) {
$cr = ERROR_WRONG_PWD;
break;
}
if ($set_status && $set_status == 'off') {
if (ZimAPI_cameraOff()) {
$cr = ERROR_OK;
} else {
$cr = ERROR_INTERNAL;
}
} else {
if ($set_status && $set_status == 'on') {
// temporary change - jump out of verification if we have no parameter 20140811
if (!$parameter) {
$parameter = ZIMAPI_PRM_CAMERA_PRINTSTART;
}
if (ZimAPI_cameraOn($parameter)) {
$cr = ERROR_OK;
} else {
$cr = ERROR_INTERNAL;
}
// }
// else {
// $cr = ERROR_MISS_PRM;
// }
} else {
if ($set_status) {
$cr = ERROR_WRONG_PRM;
} else {
$cr = ERROR_MISS_PRM;
}
}
}
break;
case ZIMAPI_PRM_PRESET:
$id_preset = $this->input->get('id');
if ($id_preset) {
$cr = ZimAPI_setPreset($id_preset);
} else {
$cr = ERROR_MISS_PRM;
}
break;
case SLICER_PRM_PRM:
$density = $this->input->get('density');
$skirt = $this->input->get('skirt');
$raft = $this->input->get('raft');
$support = $this->input->get('support');
$array_setting = array();
if ($density !== FALSE) {
$density = (int) $density / 100;
if ($density <= 0 || $density >= 1) {
$cr = ERROR_MISS_PRM;
break;
}
$array_setting['fill_density'] = $density;
}
if ($skirt !== FALSE) {
$array_setting['skirts'] = (int) $skirt == 1 ? 1 : 0;
}
if ($raft !== FALSE) {
$array_setting['raft_layers'] = (int) $raft == 1 ? 1 : 0;
}
if ($support !== FALSE) {
$array_setting['support_material'] = (int) $support == 1 ? 1 : 0;
}
if (count($array_setting) == 0) {
$cr = ERROR_MISS_PRM;
} else {
$cr = Slicer_changeParameter($array_setting);
}
break;
case ZIMAPI_PRM_SSO_NAME:
$name = $this->input->get('name');
if ($name) {
$cr = ZimAPI_setPrinterSSOName($name);
} else {
$cr = ERROR_MISS_PRM;
}
break;
case ZIMAPI_PRM_UPGRADE:
$status_set = $this->input->get('v');
$profile = $this->input->get('profile');
if ($status_set) {
$cr = ZimAPI_setUpgradeMode($status_set, $profile);
} else {
$cr = ERROR_MISS_PRM;
}
break;
case ZIMAPI_PRM_PROXY:
$status_set = $this->input->get('v');
if ($status_set) {
$cr = ZimAPI_setTromboning($status_set);
} else {
$cr = ERROR_MISS_PRM;
}
break;
case ZIMAPI_PRM_SSH:
$status_set = $this->input->get('v');
if ($status_set) {
$cr = ZimAPI_setSSH($status_set);
} else {
$cr = ERROR_MISS_PRM;
}
break;
case ZIMAPI_PRM_STATS:
$status_set = $this->input->get('v');
if ($status_set) {
$cr = ZimAPI_setStatistic($status_set);
} else {
$cr = ERROR_MISS_PRM;
}
break;
default:
$cr = ERROR_WRONG_PRM;
break;
}
} else {
$cr = ERROR_MISS_PRM;
}
$this->_return_cr($cr);
return;
}
