public function timelapse()
{
$template_data = array();
$array_info = array();
$status_current = NULL;
$array_status = array();
$restart_url = NULL;
$model_displayname = NULL;
$show_storegcode = FALSE;
$this->load->library('parser');
$this->load->helper('zimapi');
$this->lang->load('printdetail', $this->config->item('language'));
if (CoreStatus_checkInIdle($status_current, $array_status) && array_key_exists(CORESTATUS_TITLE_PRINTMODEL, $array_status)) {
$model_id = NULL;
$abb_cartridge = NULL;
$model_temper = NULL;
if (strpos($array_status[CORESTATUS_TITLE_PRINTMODEL], CORESTATUS_VALUE_MID_PREFIXGCODE) === 0) {
// gcode library model
$gcode_info = array();
$gid = (int) substr($array_status[CORESTATUS_TITLE_PRINTMODEL], strlen(CORESTATUS_VALUE_MID_PREFIXGCODE));
$model_displayname = t('timelapse_info_modelname_unknown');
$this->load->helper('printerstoring');
$gcode_info = PrinterStoring_getInfo("gcode", $gid);
if (!is_null($gcode_info) && array_key_exists("name", $gcode_info)) {
$model_displayname = $gcode_info["name"];
}
$array_info[] = array('title' => t('timelapse_info_modelname_title'), 'value' => $model_displayname);
$restart_url = '/printdetail/printgcode?id=' . $gid;
} else {
switch ($array_status[CORESTATUS_TITLE_PRINTMODEL]) {
case CORESTATUS_VALUE_MID_SLICE:
$preset_id = NULL;
$model_filename = array();
$preset_name = t('timelapse_info_presetname_unknown');
$this->load->helper('slicer');
if (ERROR_OK == Slicer_getModelFile(0, $model_filename, TRUE)) {
foreach ($model_filename as $model_basename) {
if (strlen($model_displayname)) {
$model_displayname .= ' + ' . $model_basename;
} else {
$model_displayname = $model_basename;
}
}
} else {
$model_displayname = t('timelapse_info_modelname_slice');
}
$array_info[] = array('title' => t('timelapse_info_modelname_title'), 'value' => $model_displayname);
if (ZimAPI_getPreset($preset_id)) {
$array_json = array();
if (ERROR_OK == ZimAPI_getPresetInfoAsArray($preset_id, $array_json)) {
$preset_name = $array_json[ZIMAPI_TITLE_PRESET_NAME];
}
}
$array_info[] = array('title' => t('timelapse_info_presetname_title'), 'value' => $preset_name);
$restart_url = '/printdetail/printslice';
$show_storegcode = TRUE;
break;
case CORESTATUS_VALUE_MID_PRIME_R:
$abb_cartridge = 'r';
// treat priming in the same way
// treat priming in the same way
case CORESTATUS_VALUE_MID_PRIME_L:
// never reach here normally (no timelapse for priming in principe, just for safety)
$array_info[] = array('title' => t('timelapse_info_modelname_title'), 'value' => t('timelapse_info_modelname_prime'));
if (is_null($abb_cartridge)) {
$abb_cartridge = 'l';
}
$restart_url = '/printdetail/printprime?r&v=' . $abb_cartridge;
//TODO we lose callback info here
break;
case CORESTATUS_VALUE_MID_CALIBRATION:
// never reach here normally (no timelapse for calibration model, just for safety)
$this->load->helper('printlist');
$model_id = ModelList_codeModelHash(PRINTLIST_MODEL_CALIBRATION);
$restart_url = '/printmodel/detail?id=calibration';
// treat as a normal pre-sliced model
// treat as a normal pre-sliced model
default:
// treat as pre-sliced model
$model_data = array();
$model_displayname = t('timelapse_info_modelname_unknown');
if (is_null($model_id)) {
$this->load->helper('printlist');
$model_id = $array_status[CORESTATUS_TITLE_PRINTMODEL];
}
if (ERROR_OK == ModelList__getDetailAsArray($model_id, $model_data, TRUE)) {
$model_displayname = $model_data[PRINTLIST_TITLE_NAME];
}
$array_info[] = array('title' => t('timelapse_info_modelname_title'), 'value' => $model_displayname);
if (is_null($restart_url)) {
$restart_url = '/printdetail/printmodel?id=' . $model_id;
}
break;
}
}
if (array_key_exists(CORESTATUS_TITLE_ELAPSED_TIME, $array_status)) {
$display_time = NULL;
$this->load->helper('timedisplay');
$display_time = TimeDisplay__convertsecond($array_status[CORESTATUS_TITLE_ELAPSED_TIME], '');
$array_info[] = array('title' => t('timelapse_info_elapsedtime_title'), 'value' => $display_time);
}
if ($this->config->item('nb_extruder') < 2 && array_key_exists(CORESTATUS_TITLE_P_TEMPER_R, $array_status) && $array_status[CORESTATUS_TITLE_P_TEMPER_R] > 0) {
$model_temper = t('timelapse_info_temperature_value_mono', array($array_status[CORESTATUS_TITLE_P_TEMPER_R]));
} else {
if (array_key_exists(CORESTATUS_TITLE_P_TEMPER_L, $array_status) && $array_status[CORESTATUS_TITLE_P_TEMPER_L] > 0 && array_key_exists(CORESTATUS_TITLE_P_TEMPER_R, $array_status) && $array_status[CORESTATUS_TITLE_P_TEMPER_R] > 0) {
$model_temper = t('timelapse_info_temperature_values', array($array_status[CORESTATUS_TITLE_P_TEMPER_L], $array_status[CORESTATUS_TITLE_P_TEMPER_R]));
} else {
if (array_key_exists(CORESTATUS_TITLE_P_TEMPER_R, $array_status) && $array_status[CORESTATUS_TITLE_P_TEMPER_R] > 0) {
$model_temper = t('timelapse_info_temperature_value_r', array($array_status[CORESTATUS_TITLE_P_TEMPER_R]));
} else {
if (array_key_exists(CORESTATUS_TITLE_P_TEMPER_L, $array_status) && $array_status[CORESTATUS_TITLE_P_TEMPER_L] > 0) {
$model_temper = t('timelapse_info_temperature_value_l', array($array_status[CORESTATUS_TITLE_P_TEMPER_L]));
}
}
}
}
if ($model_temper) {
if (array_key_exists(CORESTATUS_TITLE_P_TEMPER_B, $array_status) && $array_status[CORESTATUS_TITLE_P_TEMPER_B] > 0) {
$model_temper .= t('timelapse_info_extra_temperature_value_b', array($array_status[CORESTATUS_TITLE_P_TEMPER_B]));
}
$array_info[] = array('title' => t('timelapse_info_temperature_title'), 'value' => $model_temper);
}
} else {
$this->load->helper('printerlog');
PrinterLog_logError('unintended status detected in timelapse page: ' . $status_current, __FILE__, __LINE__);
$this->output->set_header('Location: /');
return;
}
// parse the main body
$template_data = array('internet_ok' => @file_get_contents("https://sso.zeepro.com/login.ashx") === FALSE ? 'false' : 'true', 'loading_player' => t('timelapse_info'), 'finish_info' => t('Congratulation, your printing is complete!'), 'home_button' => t('Home'), 'home_popup_text' => t('home_popup_text'), 'yes' => t('Yes'), 'no' => t('No'), 'video_error' => t('video_error'), 'timelapse_title' => t('timelapse_title'), 'send_email_button' => t('send_email_button'), 'send_yt_button' => t('send_yt_button'), 'send_fb_button' => t('send_fb_button'), 'send_email_hint' => t('send_email_hint'), 'send_email_action' => t('send_email_action'), 'send_email_error' => t('send_email_error'), 'send_email_wrong' => t('send_email_wrong'), 'send_email_multi' => t('send_email_multi'), 'video_url' => '/tmp/' . ZIMAPI_FILENAME_TIMELAPSE . '?_=' . time(), 'timelapse_info_title' => t('timelapse_info_title'), 'timelapse_info' => $array_info, 'again_button' => t('Print again'), 'restart_url' => $restart_url ? $restart_url : '/', 'send_email_modelname' => $model_displayname, 'display_storegocde' => $show_storegcode ? 'true' : 'false', 'storegcode_checkbox' => t('storegcode_info'), 'storegcode_hint' => t('storegcode_name'), 'storegcode_err_cfm' => t('storegcode_err_cfm'), 'storegcode_title' => t('storegcode_title'));
// parse all page
$this->_parseBaseTemplate(t('ZeePro Personal Printer 21 - Printing details'), $this->parser->parse('printdetail/timelapse', $template_data, TRUE));
return;
}
public function youtube_form()
{
$array_status = array();
$model_displayname = NULL;
$this->load->library('parser');
$this->lang->load('youtube_form', $this->config->item('language'));
$this->lang->load('printdetail', $this->config->item('language'));
// timelapse default model name
$this->load->helper('corestatus');
if (CoreStatus_checkInIdle($status_current, $array_status) && array_key_exists(CORESTATUS_TITLE_PRINTMODEL, $array_status)) {
$model_id = NULL;
if (strpos($array_status[CORESTATUS_TITLE_PRINTMODEL], CORESTATUS_VALUE_MID_PREFIXGCODE) === 0) {
// gcode library model
$gcode_info = array();
$gid = (int) substr($array_status[CORESTATUS_TITLE_PRINTMODEL], strlen(CORESTATUS_VALUE_MID_PREFIXGCODE));
$model_displayname = t('timelapse_info_modelname_unknown');
$this->load->helper('printerstoring');
$gcode_info = PrinterStoring_getInfo("gcode", $gid);
if (!is_null($gcode_info) && array_key_exists("name", $gcode_info)) {
$model_displayname = $gcode_info["name"];
}
} else {
switch ($array_status[CORESTATUS_TITLE_PRINTMODEL]) {
case CORESTATUS_VALUE_MID_SLICE:
$preset_id = NULL;
$model_filename = array();
$this->load->helper('slicer');
if (ERROR_OK == Slicer_getModelFile(0, $model_filename, TRUE)) {
foreach ($model_filename as $model_basename) {
if (strlen($model_displayname)) {
$model_displayname .= ' + ' . $model_basename;
} else {
$model_displayname = $model_basename;
}
}
} else {
$model_displayname = t('timelapse_info_modelname_slice');
}
break;
default:
// treat as pre-sliced model
$model_data = array();
$model_displayname = "";
if (is_null($model_id)) {
$this->load->helper('printlist');
$model_id = $array_status[CORESTATUS_TITLE_PRINTMODEL];
}
if (ERROR_OK == ModelList__getDetailAsArray($model_id, $model_data, TRUE)) {
$model_displayname = $model_data[PRINTLIST_TITLE_NAME];
}
break;
}
}
}
if ($this->input->server('REQUEST_METHOD') == 'POST') {
$this->load->library("session");
$title = isset($_POST['yt_title']) ? $_POST['yt_title'] : t('yt_title') . $model_displayname;
$description = isset($_POST['yt_description']) ? $_POST['yt_description'] : t('yt_desc');
// $tags = explode(',', $_POST['yt_tags'] ? $_POST['yt_tags'] : t('yt_tags'));
$tags = explode(',', t('yt_tags'));
$tags = array_map('trim', $tags);
$video_infos = array('yt_title' => $title, 'yt_tags' => $tags, 'yt_desc' => $description, 'yt_privacy' => $_POST["yt_privacy"]);
$this->session->set_userdata($video_infos);
$this->output->set_header("Location: /share/connect_google");
return;
}
$data = array('yt_title' => t('yt_title') . $model_displayname, 'yt_desc' => t('yt_desc'), 'yt_privacy_public' => t('yt_privacy_public'), 'yt_privacy_private' => t('yt_privacy_private'), 'yt_privacy_unlisted' => t('yt_privacy_unlisted'), 'upload_to_yt' => t('upload_to_yt'), 'title_label' => t('title_label'), 'desc_label' => t('desc_label'), 'tags_label' => t('tags_label'), 'privacy_label' => t('privacy_label'), 'back' => t('back'));
$this->_parseBaseTemplate(t('youtube_title'), $this->parser->parse('share/youtube_form', $data, TRUE));
return;
}
function PrinterState_prepareStatsSliceLabel($end_slice = FALSE)
{
$stats_info = array();
$preset_id = NULL;
$model_filename = array();
$array_slice = array();
$array_check = array('l' => array(PRINTERLOG_STATS_FILA_TYPE_L, PRINTERLOG_STATS_FILA_COLOR_L, PRINTERLOG_STATS_FILA_USED_L), 'r' => array(PRINTERLOG_STATS_FILA_TYPE_R, PRINTERLOG_STATS_FILA_COLOR_R, PRINTERLOG_STATS_FILA_USED_R));
$CI =& get_instance();
$CI->load->helper(array('slicer', 'zimapi'));
// remove unused filament
if ($end_slice == TRUE) {
if (ERROR_OK == PrinterState_getSlicedJson($array_slice)) {
foreach (array('r', 'l') as $abb_filament) {
if (!isset($array_slice[$abb_filament])) {
unset($array_check[$abb_filament]);
}
}
}
}
// filament info
foreach ($array_check as $abb_filament => $assign_key) {
$json_cartridge = array();
if (ERROR_OK == PrinterState_getCartridgeAsArray($json_cartridge, $abb_filament)) {
$stats_info[$assign_key[0]] = $json_cartridge[PRINTERSTATE_TITLE_MATERIAL];
$stats_info[$assign_key[1]] = $json_cartridge[PRINTERSTATE_TITLE_COLOR];
if ($end_slice == TRUE) {
$stats_info[$assign_key[2]] = $array_slice[$abb_filament][PRINTERSTATE_TITLE_NEED_L];
}
}
}
// model name
if (ERROR_OK == Slicer_getModelFile(0, $model_filename, TRUE)) {
$model_displayname = NULL;
foreach ($model_filename as $model_basename) {
if (strlen($model_displayname)) {
$model_displayname .= ' + ' . $model_basename;
} else {
$model_displayname = $model_basename;
}
}
if (strlen($model_displayname)) {
$stats_info[PRINTERLOG_STATS_MODEL] = $model_displayname;
}
}
// preset name
if (ZimAPI_getPreset($preset_id)) {
$array_json = array();
if (ERROR_OK == ZimAPI_getPresetInfoAsArray($preset_id, $array_json)) {
$stats_info[PRINTERLOG_STATS_PRESET] = $array_json[ZIMAPI_TITLE_PRESET_NAME];
}
}
return $stats_info;
}
