/**
* @covers DataSift\Storyplayer\CommandLib\CommandRunner::runSilently
*/
public function testReturns127IfTheCommandDoesNotExist()
{
// ----------------------------------------------------------------
// setup your test
// our test subject
$obj = new CommandRunner();
// a fake logging object
$log = Mockery::mock("DataSift\\Storyplayer\\PlayerLib\\Action_LogItem");
$log->shouldReceive('endAction')->once();
$log->shouldReceive('captureOutput')->once();
// our mocked $st
$st = Mockery::mock("DataSift\\Storyplayer\\PlayerLib\\StoryTeller");
$st->shouldReceive('startAction')->andReturn($log);
// our example command
$helperCmd = "/fred/alice/this_command_does_not_exist";
// ----------------------------------------------------------------
// perform the change
$result = $obj->runSilently($st, $helperCmd);
// ----------------------------------------------------------------
// test the results
$this->assertTrue($result instanceof CommandResult);
$this->assertEquals(127, $result->returnCode);
}
/**
* @return string
*/
public function determineBridgedInterface()
{
// what are we doing?
$log = usingLog()->startAction("determine bridged network interface for Vagrant VM");
try {
// 1. try to load Vagrant settings from storyplayer.json
// e.g.: "moduleSettings":{"vagrant":{"bridgedIface":"eth0"}}
$vagrantSettings = fromStoryplayer()->getModuleSetting('vagrant');
if (!empty($vagrantSettings->bridgedIface)) {
$log->endAction('Returning configured ' . $vagrantSettings->bridgedIface . ' interface');
return $vagrantSettings->bridgedIface;
}
} catch (E5xx_ActionFailed $e) {
// ignore errors as this setting may not exist
}
// 2. check if VirtualBox (VBoxManage) is installed
$command = 'which VBoxManage';
$commandRunner = new CommandRunner();
$result = $commandRunner->runSilently($command);
if ($result->returnCode !== 0) {
// VBoxManage is not installed, we are probably using another provider
// like OpenStack that do not require this setting
$log->endAction('VBoxManage is not installed: returning default eth0 interface');
return 'eth0';
}
// 3. VBoxManage can actually tell us what we need to know
$command = 'VBoxManage list bridgedifs';
$commandRunner = new CommandRunner();
$result = $commandRunner->runSilently($command);
if ($result->returnCode != 0) {
$log->endAction('unable to get list of bridgable network interfaces from VBoxManage :(');
throw new E5xx_ActionFailed(__METHOD__);
}
// now we just need to make sense of it all
$lines = explode("\n", $result->output);
$iface = null;
foreach ($lines as $line) {
$matches = [];
if (preg_match("|Name:[\\s]+(.*)|", $line, $matches)) {
$iface = $matches[1];
} else {
if ($iface !== null && preg_match("|IPAddress:[\\s]+(.*)|", $line, $matches)) {
// our network interface contains an IPAddress - it is likely
// to be one that works
if ($matches[1] != '0.0.0.0') {
$log->endAction($iface);
return $iface;
}
}
}
}
// if we get here, then we haven't found a network interface to use
$log->endAction("no bridgeable network interface found :(");
throw new E5xx_ActionFailed(__METHOD__);
}
/**
*
* @param VagrantVmDetails $vmDetails
* @param string $command
* @return CommandResult
*/
public function runCommandViaHostManager($vmDetails, $command)
{
// what are we doing?
$log = usingLog()->startAction("run vagrant command '{$command}'");
// build the command
$fullCommand = "cd '{$vmDetails->dir}' && vagrant ssh -c \"{$command}\"";
// run the command
$commandRunner = new CommandRunner();
$result = $commandRunner->runSilently($fullCommand);
// all done
$log->endAction("return code was '{$result->returnCode}'");
return $result;
}
public function provisionHosts(ProvisioningDefinition $hosts, $provConf)
{
// what are we doing?
$log = usingLog()->startAction("use Ansible to provision host(s)");
// get our ansible configuration
$ansibleSettings = fromConfig()->getModuleSetting('ansible');
// our reverse list of roles => hosts
$rolesToHosts = array();
// build up the list of roles
foreach ($hosts as $hostId => $hostProps) {
// what is the host's IP address?
$ipAddress = fromHost($hostId)->getIpAddress();
// add the host to the required roles
if (isset($hostProps->roles)) {
foreach ($hostProps->roles as $role) {
if (!isset($rolesToHosts[$role])) {
$rolesToHosts[$role] = array();
}
$rolesToHosts[$role][] = $ipAddress;
}
}
}
// at this point, we know which roles need applying to which hosts
//
// build up the inventory file
$inventory = "";
foreach ($rolesToHosts as $role => $hostsForRole) {
// add the role marker
$inventory .= "[{$role}]" . PHP_EOL;
// add the list of hosts
foreach ($hostsForRole as $host) {
$inventory .= $host . PHP_EOL;
}
// add an extra blank line for readability
$inventory .= PHP_EOL;
}
// write out the inventory
$inventoryFile = $this->writeInventoryFile($inventory);
// where should we create the host_vars?
$inventoryFolder = dirname($inventoryFile);
// we set these in the foreach() loop
$sshUsername = null;
$sshKeyFile = null;
// now we need to write out the host files
foreach ($hosts as $hostId => $hostProps) {
// what is the host's IP address?
$ipAddress = fromHost($hostId)->getIpAddress();
$sshUsername = fromHost($hostId)->getSshUsername();
$sshKeyFile = fromHost($hostId)->getSshKeyFile();
// do we have any vars to write?
if (!isset($hostProps->params) || $hostProps->params === null || is_array($hostProps) && count($hostProps) == 0) {
// we'd better remove any host_vars file that exists,
// in case what's there (if anything) is left over from
// a different test run
$this->removeHostVarsFile($inventoryFolder, $ipAddress);
} else {
// write the host vars file
$this->writeHostVarsFile($inventoryFolder, $ipAddress, $hostProps->params);
}
}
// build the command for Ansible
$command = 'ansible-playbook -i "' . $inventoryFile . '"' . ' "--private-key=' . $sshKeyFile . '"' . ' "--user='******'"';
$command .= ' "' . $ansibleSettings->dir . DIRECTORY_SEPARATOR . $ansibleSettings->playbook . '"';
// let's run the command
//
// this looks like a hack, but it is the only way to work with Ansible
// if there's an ansible.cfg in the root of the playbook :(
$cwd = getcwd();
chdir($ansibleSettings->dir);
$commandRunner = new CommandRunner();
$result = $commandRunner->runSilently($command);
chdir($cwd);
// what happened?
if (!$result->didCommandSucceed()) {
throw new E5xx_ActionFailed(__METHOD__, "provisioning failed");
}
// all done
$log->endAction();
}
public function provisionHosts(ProvisioningDefinition $hosts, $provConfig)
{
// what are we doing?
$log = usingLog()->startAction("use dsbuild to provision host(s)");
// the params file that we are going to output
$dsbuildParams = new BaseObject();
// build up the list of settings to write out
foreach ($hosts as $hostId => $hostProps) {
// what is the host's IP address?
$ipAddress = fromHost($hostId)->getIpAddress();
$propName = $hostId . '_ipv4Address';
$dsbuildParams->{$propName} = $ipAddress;
if (isset($hostProps->params)) {
$dsbuildParams->mergeFrom($hostProps->params);
}
}
// add in all the config settings that we know about
$dsbuildParams->storyplayer_ipv4Address = fromConfig()->get('storyplayer.ipAddress');
$dsbuildParams->mergeFrom($this->flattenData($this->st->getActiveConfig()->getData('')));
// write them out
$this->writeDsbuildParamsShellFile((array) $dsbuildParams);
$this->writeDsbuildParamsYamlFile((array) $dsbuildParams);
// at this point, we are ready to attempt provisioning
//
// provision each host in the order that they're listed
foreach ($hosts as $hostId => $hostProps) {
// which dsbuildfile are we going to run?
$hostDir = fromHost($hostId)->getLocalFolder();
$dsbuildFilename = $this->getDsbuildFilename($hostDir, $provConfig, $hostId);
if ($dsbuildFilename === null) {
// there is no dsbuildfile at all to run
$log->endAction("cannot find dsbuildfile to run :(");
throw new E5xx_ActionFailed(__METHOD__, "no dsbuildfile to run");
}
// at this point, we are ready to provision
$commandRunner = new CommandRunner();
// copy the dsbuildparams files to the target machine using scp
// NOTE: the "vagrant rsync" command seems not working with some Vagrant provisioners (e.g. OpenStack)
$command = 'scp' . ' ' . $dsbuildParams->{'hosts_' . $hostId . '_scpOptions_0'} . ' ' . $dsbuildParams->{'hosts_' . $hostId . '_scpOptions_1'} . ' dsbuildparams.*' . ' ' . $dsbuildParams->{'hosts_' . $hostId . '_sshUsername'} . '@' . $dsbuildParams->{'hosts_' . $hostId . '_ipAddress'} . ':/vagrant/';
$result = $commandRunner->runSilently($command);
if (!$result->didCommandSucceed()) {
// try to rsync folders in case of scp fail
$command = 'vagrant rsync ' . $hostId;
$commandRunner->runSilently($command);
}
// provision
$command = 'sudo bash /vagrant/' . $dsbuildFilename;
$result = usingHost($hostId)->runCommand($command);
// what happened?
if (!$result->didCommandSucceed()) {
throw new E5xx_ActionFailed(__METHOD__, "provisioning failed");
}
}
// all done
$log->endAction();
}