/**
* 添加一条分类信息.
*
* @access public
* @return void
*/
public function addAction()
{
$postCityName = (string) I('post.city_name', '');
// 发布的城市名称.
$postCatId = (int) I('post.cat_id', '');
// 发布的栏目 ID.
$loginedUserInfo = $this->getLoginedUserInfo();
// 已登录的用户信息.
// 检查用户是否在黑名单内.
if (PostLog::getInstance()->checkUserInBlacklist($loginedUserInfo['uid'])) {
$this->setAjaxData(Message::FAILED, '你已在黑名单内, 不允许发布!')->myAjaxReturn();
}
// 检查新用户间隔一定时间发贴.
if (!PostLog::getInstance()->checkNewUserPost($loginedUserInfo['uid'], PostLog::TYPE_CLASSIFIED)) {
$this->setAjaxData(Message::FAILED, '新注册用户请在注册' . C('NEW_USER_POST_TIME') . '分钟后发帖!')->myAjaxReturn();
}
$groupIdList = [9, 10, 11, 12];
$groupId = M('User')->where(['userID' => $loginedUserInfo['uid']])->getField('groupID');
if (!in_array((int) $groupId, $groupIdList, true)) {
// 每次发贴的间隔时间.
if (!PostLog::getInstance()->checkPostTimeInterval($loginedUserInfo['uid'], PostLog::TYPE_CLASSIFIED)) {
$this->setAjaxData(Message::FAILED, '每次发帖间隔时间为' . C('INTERVAL_TIME') . '分钟!')->myAjaxReturn();
}
// 检查当前用户当天发贴是否已超过限制的发贴数.
if (!PostLog::getInstance()->checkPostNum($loginedUserInfo['uid'], PostLog::TYPE_CLASSIFIED)) {
$this->setAjaxData(Message::FAILED, '已超过发帖数限制!')->myAjaxReturn();
}
}
// 检查城市和栏目 ID 是否有效.
try {
$cityInfo = $this->_checkCity($postCityName);
// 检查城市.
$categoryInfo = $this->_checkCategory($postCatId);
// 检查栏目.
$locateCountryInfo = $this->getLocateCountry();
// 定位国家.
// 判断发布城市的国家是否为定位国家, 不是表示非法提交.
if ($cityInfo['countryID'] != $locateCountryInfo['id']) {
throw new \Exception(Message::get(Message::PARAM_ERROR), Message::PARAM_ERROR);
}
} catch (\Exception $e) {
$this->setAjaxData((string) $e->getCode(), $e->getMessage())->myAjaxReturn();
}
$cityId = $cityInfo['id'];
// 发布城市 ID.
$moduleId = $categoryInfo['module_id'];
// 模型 ID.
unset($cityInfo, $categoryInfo);
$moduleConfig = C('module_config')[$moduleId];
// 模型配置.
$flagIsPic = $moduleConfig['ispic'];
// 是否有图标记.
$postData = I('post.');
// 接收 $_POST 数据.
trim_all($postData);
// 去掉首尾空格.
$postData['content'] = nl2br($postData['content']);
// 将发布的换行符替换成 br.
// -------------------------------------- 赋值主表数据 -------------------------------------------------------
$postData['city_id'] = $cityId;
// 发布城市.
$postData['module_id'] = $moduleId;
// 模型 ID.
$postData['pub_user_id'] = $loginedUserInfo['uid'];
// 用户 ID.
$postData['edit_user_name'] = $postData['pub_user_name'] = $loginedUserInfo['userName'];
// 发布人用户名和编辑用户名.
$postData['ip'] = get_client_ip(0);
// IP 地址.
$postData['country_id'] = $locateCountryInfo['id'];
// 定位的国家 ID.
$postData['thumb'] = '';
if ($flagIsPic) {
// pic 有图时接收的是数组.
$arrPicUrl = (array) I('post.picurl', []);
// 提交的上传图片地址.
$arrPicUrl = array_slice($arrPicUrl, 0, C('classified_upload_image_num'));
// 有图片上传的, 只取前 10 张.
$postData['picurl'] = Util::removeSiteDomainOfPic($arrPicUrl, '|', '_thumb');
$postData['thumb'] = Util::removeSiteDomainOfPic($arrPicUrl);
} else {
$postData['picurl'] = '';
// 无图.
}
$postData['edit_time'] = $postData['create_time'] = time();
// 提交时间和编辑时间.
$postData['msn'] = (string) I('post.msn', '');
// msn.
// 判断联系方式三者必填一项.
$telephone = (string) I('post.telephone', '');
$email = (string) I('post.email', '');
$qq = (string) I('post.qq', '');
$resValidate = [];
if (empty($telephone) && empty($email) && empty($qq)) {
$resValidate['contact_way'] = '联系方式至少填一项';
}
// 主表数据赋值完成.
// 执行字段映射, 返回 main(主表数据), detail(副表数据), label(字段显示名称).
$mainTblField = C('module_config')['postMainTableField'];
// 主表字段.
$detailTblField = $moduleConfig['postPage'];
// 副表字段.
// 字段映射并赋字段默认值和处理有其它值的情况.
$postData = Util::autoFieldMap($postData, $mainTblField, $detailTblField);
// 执行验证规则.
$validator = Validator::getInstance();
// 实例化验证器.
$flag = $validator->validate($postData['main'], RuleOfClassifiedInfo::$mainRule) && $validator->validate($postData['detail'], RuleOfClassifiedInfo::getRule($moduleId));
if (FALSE === $flag) {
// 验证失败.
$_errors = $validator->getError();
$resValidate = array_merge($resValidate, $_errors);
$this->setAjaxData(Message::FAILED, Message::get(Message::FAILED), $resValidate)->myAjaxReturn();
} elseif (!empty($resValidate)) {
$this->setAjaxData(Message::FAILED, Message::get(Message::FAILED), $resValidate)->myAjaxReturn();
}
// 验证通过, 执行入库操作.
$modelCtgData = new CtgDataModel();
$result = $modelCtgData->addInfo($postData['main'], $postData['detail'], $moduleId);
if ($result) {
// 处理用户积分.
$modelCreditrule = new CreditruleModel();
$modelCreditrule->processCredit('Class', $loginedUserInfo['uid']);
// 记录发贴数.
PostLog::getInstance()->writeLog($loginedUserInfo['uid'], PostLog::TYPE_CLASSIFIED);
$this->setAjaxData(Message::SUCCESS, '发布成功')->myAjaxReturn();
}
$this->setAjaxData(Message::FAILED, '发布失败')->myAjaxReturn();
}
/**
* 添加一条资讯信息.
*
* @access public
* @return void
*/
public function addAction()
{
$catId = I('post.catId', 0);
// 资讯类型.
$title = I('post.title', '');
// 标题.
$arrPicUrl = I('post.picurl', []);
// 缩略图.
$content = I('post.content', '');
// 文章详情.
$postCityName = I('post.city_name', '');
// 发布城市.
$loginedUserInfo = $this->getLoginedUserInfo();
// 已登录的用户信息.
// 检查用户是否在黑名单内.
if (PostLog::getInstance()->checkUserInBlacklist($loginedUserInfo['uid'])) {
$this->setAjaxData(Message::FAILED, '你已在黑名单内, 不允许发布!')->myAjaxReturn();
}
// 检查新用户间隔一定时间发贴.
if (!PostLog::getInstance()->checkNewUserPost($loginedUserInfo['uid'], PostLog::TYPE_SQ)) {
$this->setAjaxData(Message::FAILED, '新注册用户请在注册' . C('NEW_USER_POST_TIME') . '分钟后发帖!')->myAjaxReturn();
}
$groupIdList = [9, 10, 11, 12];
$groupId = M('User')->where(['userID' => $loginedUserInfo['uid']])->getField('groupID');
if (!in_array((int) $groupId, $groupIdList, true)) {
// 每次发贴的间隔时间.
if (!PostLog::getInstance()->checkPostTimeInterval($loginedUserInfo['uid'], PostLog::TYPE_SQ)) {
$this->setAjaxData(Message::FAILED, '每次发帖间隔时间为' . C('INTERVAL_TIME') . '分钟!')->myAjaxReturn();
}
// 检查当前用户当天发贴是否已超过限制的发贴数.
if (!PostLog::getInstance()->checkPostNum($loginedUserInfo['uid'], PostLog::TYPE_SQ)) {
$this->setAjaxData(Message::FAILED, '已超过发帖数限制!')->myAjaxReturn();
}
}
// 检查发布的城市和栏目是否有效.
try {
$cityInfo = $this->_checkCity($postCityName);
$sqClassInfo = $this->_checkCategory($catId);
$locateCountryInfo = $this->getLocateCountry();
// 定位国家.
// 判断发布城市的国家是否为定位国家, 不是表示非法提交.
if ($cityInfo['countryID'] != $locateCountryInfo['id']) {
throw new \Exception(Message::get(Message::PARAM_ERROR), Message::PARAM_ERROR);
}
} catch (\Exception $e) {
$this->setAjaxData((string) $e->getCode(), $e->getMessage())->myAjaxReturn();
}
$cityId = $cityInfo['id'];
$countryId = $locateCountryInfo['id'];
unset($cityInfo, $sqClassInfo, $locateCountryInfo);
// -------------------------- 赋值数据-------------------------------------
$mainData = $detailData = [];
$mainData['sid'] = $catId;
$mainData['gid'] = $countryId;
$mainData['cityID'] = $cityId;
$mainData['userID'] = $loginedUserInfo['uid'];
$mainData['userName'] = $mainData['editor'] = $loginedUserInfo['userName'];
$mainData['postTime'] = $mainData['editTime'] = time();
$mainData['ip'] = get_client_ip(0);
$mainData['verify'] = 1;
$mainData['is_from'] = 1;
// 0表示web, 1表示app.
if (empty($arrPicUrl)) {
$mainData['picUrl'] = $mainData['thumb'] = '';
} else {
$allowArrPicUrl = array_slice($arrPicUrl, 0, C('sqinfo_upload_image_num'));
// 有图片上传的, 只取前 3 张.
$mainData['picUrl'] = Util::removeSiteDomainOfPic($allowArrPicUrl, '|', '_thumb');
$mainData['thumb'] = Util::removeSiteDomainOfPic($allowArrPicUrl);
}
$mainData['title'] = $title;
$mainData['content'] = $content;
$modelSqData = new SqDataModel();
$res = $modelSqData->validate($modelSqData->baseRules)->create($mainData);
if (!$res) {
$this->setAjaxData(Message::PARAM_ERROR, '请将表单填写完整')->myAjaxReturn();
}
$detailData['content'] = $mainData['content'];
unset($mainData['content']);
$strContentPic = $mainData['picUrl'] = Util::removeSiteDomainOfPic($arrPicUrl, '|', '_thumb');
$arrContentPic = explode('|', $strContentPic);
foreach ($arrContentPic as $url) {
$detailData['content'] .= '<p><img src="' . $url . '" /></p>';
}
$result = $modelSqData->addInfo($catId, $mainData, $detailData);
if ($result) {
// 记录发贴数.
PostLog::getInstance()->writeLog($loginedUserInfo['uid'], PostLog::TYPE_SQ);
$this->setAjaxData(Message::SUCCESS, '发布成功')->myAjaxReturn();
} else {
$this->setAjaxData(Message::FAILED, '发布失败')->myAjaxReturn();
}
}
