<?php
if ($device['os'] == 'routeros') {
$oids = snmp_walk($device, 'mtxrHlTemperature', '-OsqnU', 'MIKROTIK-MIB');
if ($debug) {
echo $oids . "\n";
}
if ($oids !== false) {
echo 'MIKROTIK-MIB ';
}
$divisor = 10.0;
$type = 'mikrotik';
foreach (explode("\n", $oids) as $data) {
$data = trim($data);
if ($data) {
list($oid, $descr) = explode(' ', $data, 2);
$split_oid = explode('.', $oid);
$index = $split_oid[count($split_oid) - 1];
$descr = 'Temperature ' . $index;
$oid = '.1.3.6.1.4.1.14988.1.1.3.10.' . $index;
$temperature = snmp_get($device, $oid, '-Oqv') / $divisor;
discover_sensor($valid['sensor'], 'temperature', $device, $oid, $index, $type, $descr, $divisor, '1', null, null, null, null, $temperature);
}
}
}
<?php
if ($device['os'] == "junos" || $device['os_group'] == "junos") {
echo "JunOS ";
$oids = snmp_walk($device, "1.3.6.1.4.1.2636.3.1.13.1.7", "-Osqn", "JUNIPER-MIB", $config['install_dir'] . "/mibs/junos");
$oids = trim($oids);
foreach (explode("\n", $oids) as $data) {
$data = trim($data);
$data = substr($data, 29);
if ($data) {
list($oid) = explode(" ", $data);
$temperature_oid = "1.3.6.1.4.1.2636.3.1.13.1.7.{$oid}";
$descr_oid = "1.3.6.1.4.1.2636.3.1.13.1.5.{$oid}";
$descr = snmp_get($device, $descr_oid, "-Oqv", "JUNIPER-MIB", '+' . $config['install_dir'] . "/mibs/junos");
$temperature = snmp_get($device, $temperature_oid, "-Oqv", "JUNIPER-MIB", '+' . $config['install_dir'] . "/mibs/junos");
if (!strstr($descr, "No") && !strstr($temperature, "No") && $descr != "" && $temperature != "0") {
$descr = str_replace("\"", "", $descr);
$descr = str_replace("temperature", "", $descr);
$descr = str_replace("temperature", "", $descr);
$descr = str_replace("sensor", "", $descr);
$descr = trim($descr);
discover_sensor($valid['sensor'], 'temperature', $device, $temperature_oid, $oid, 'junos', $descr, '1', '1', NULL, NULL, NULL, NULL, $temperature);
}
}
}
}
<?php
echo 'IPv4 Addresses : ';
$oids = trim(snmp_walk($device, 'ipAdEntIfIndex', '-Osq', 'IP-MIB'));
$oids = str_replace('ipAdEntIfIndex.', '', $oids);
foreach (explode("\n", $oids) as $data) {
$data = trim($data);
list($oid, $ifIndex) = explode(' ', $data);
$mask = trim(snmp_get($device, "ipAdEntNetMask.{$oid}", '-Oqv', 'IP-MIB'));
$addr = Net_IPv4::parseAddress("{$oid}/{$mask}");
$network = $addr->network . '/' . $addr->bitmask;
$cidr = $addr->bitmask;
if (dbFetchCell('SELECT COUNT(*) FROM `ports` WHERE device_id = ? AND `ifIndex` = ?', array($device['device_id'], $ifIndex)) != '0' && $oid != '0.0.0.0' && $oid != 'ipAdEntIfIndex') {
$port_id = dbFetchCell('SELECT `port_id` FROM `ports` WHERE `device_id` = ? AND `ifIndex` = ?', array($device['device_id'], $ifIndex));
if (dbFetchCell('SELECT COUNT(*) FROM `ipv4_networks` WHERE `ipv4_network` = ?', array($network)) < '1') {
dbInsert(array('ipv4_network' => $network), 'ipv4_networks');
// echo("Create Subnet $network\n");
echo 'S';
}
$ipv4_network_id = dbFetchCell('SELECT `ipv4_network_id` FROM `ipv4_networks` WHERE `ipv4_network` = ?', array($network));
if (dbFetchCell('SELECT COUNT(*) FROM `ipv4_addresses` WHERE `ipv4_address` = ? AND `ipv4_prefixlen` = ? AND `port_id` = ?', array($oid, $cidr, $port_id)) == '0') {
dbInsert(array('ipv4_address' => $oid, 'ipv4_prefixlen' => $cidr, 'ipv4_network_id' => $ipv4_network_id, 'port_id' => $port_id), 'ipv4_addresses');
// echo("Added $oid/$cidr to $port_id ( $hostname $ifIndex )\n $i_query\n");
echo '+';
} else {
echo '.';
}
$full_address = "{$oid}/{$cidr}|{$ifIndex}";
$valid_v4[$full_address] = 1;
} else {
echo '!';
<?php
if ($config['enable_sla'] && $device['os_group'] == 'cisco') {
$slas = snmp_walk($device, 'ciscoRttMonMIB.ciscoRttMonObjects.rttMonCtrl', '-Osq', '+CISCO-RTTMON-MIB');
$sla_table = array();
foreach (explode("\n", $slas) as $sla) {
$key_val = explode(' ', $sla, 2);
if (count($key_val) != 2) {
$key_val[] = '';
}
$key = $key_val[0];
$value = $key_val[1];
$prop_id = explode('.', $key);
if (count($prop_id) != 2 || !ctype_digit($prop_id[1])) {
continue;
}
$property = $prop_id[0];
$id = intval($prop_id[1]);
$sla_table[$id][$property] = trim($value);
}
// var_dump($sla_table);
// Get existing SLAs
$existing_slas = dbFetchColumn('SELECT `sla_id` FROM `slas` WHERE `device_id` = :device_id AND `deleted` = 0', array('device_id' => $device['device_id']));
foreach ($sla_table as $sla_nr => $sla_config) {
$query_data = array('device_id' => $device['device_id'], 'sla_nr' => $sla_nr);
$sla_id = dbFetchCell('SELECT `sla_id` FROM `slas` WHERE `device_id` = :device_id AND `sla_nr` = :sla_nr', $query_data);
$data = array('device_id' => $device['device_id'], 'sla_nr' => $sla_nr, 'owner' => $sla_config['rttMonCtrlAdminOwner'], 'tag' => $sla_config['rttMonCtrlAdminTag'], 'rtt_type' => $sla_config['rttMonCtrlAdminRttType'], 'status' => $sla_config['rttMonCtrlAdminStatus'] == 'active' ? 1 : 0, 'opstatus' => $sla_config['rttMonLatestRttOperSense'] == 'ok' ? 0 : 2, 'deleted' => 0);
// Some fallbacks for when the tag is empty
if (!$data['tag']) {
switch ($data['rtt_type']) {
case 'http':
// MIB-Dell-10892::temperatureProbechassisIndex.1.1 = INTEGER: 1
// MIB-Dell-10892::temperatureProbeIndex.1.1 = INTEGER: 1
// MIB-Dell-10892::temperatureProbeStateCapabilities.1.1 = INTEGER: 0
// MIB-Dell-10892::temperatureProbeStateSettings.1.1 = INTEGER: enabled(2)
// MIB-Dell-10892::temperatureProbeStatus.1.1 = INTEGER: ok(3)
// MIB-Dell-10892::temperatureProbeReading.1.1 = INTEGER: 320
// MIB-Dell-10892::temperatureProbeType.1.1 = INTEGER: temperatureProbeTypeIsAmbientESM(3)
// MIB-Dell-10892::temperatureProbeLocationName.1.1 = STRING: "BMC Planar Temp"
// MIB-Dell-10892::temperatureProbeUpperCriticalThreshold.1.1 = INTEGER: 530
// MIB-Dell-10892::temperatureProbeUpperNonCriticalThreshold.1.1 = INTEGER: 480
// MIB-Dell-10892::temperatureProbeLowerNonCriticalThreshold.1.1 = INTEGER: 70
// MIB-Dell-10892::temperatureProbeLowerCriticalThreshold.1.1 = INTEGER: 30
// MIB-Dell-10892::temperatureProbeProbeCapabilities.1.1 = INTEGER: 0
if (strstr($device['hardware'], 'Dell')) {
// stuff partially copied from akcp sensor
$oids = snmp_walk($device, 'temperatureProbeStatus', '-Osqn', 'MIB-Dell-10892');
d_echo($oids . "\n");
$oids = trim($oids);
if ($oids) {
echo 'Dell OMSA ';
}
foreach (explode("\n", $oids) as $data) {
$data = trim($data);
if ($data) {
list($oid, $status) = explode(' ', $data, 2);
d_echo('status : ' . $status . "\n");
if ($status == 'ok') {
// 2 = normal, 0 = not connected
$split_oid = explode('.', $oid);
$temperature_id = $split_oid[count($split_oid) - 2] . '.' . $split_oid[count($split_oid) - 1];
$descr_oid = ".1.3.6.1.4.1.674.10892.1.700.20.1.8.{$temperature_id}";
$descr = 'Output';
if ($numPhase > 1) {
$descr .= " Phase {$i}";
}
$current = snmp_get($device, $freq_oid, '-Oqv');
if (!$current) {
$freq_oid .= '.0';
$current = snmp_get($device, $freq_oid, '-Oqv');
}
$current /= 10;
$type = 'mge-ups';
$divisor = 10;
$index = $i;
discover_sensor($valid['sensor'], 'frequency', $device, $freq_oid, $index, $type, $descr, $divisor, '1', null, null, null, null, $current);
}
$oids = trim(snmp_walk($device, '1.3.6.1.4.1.705.1.6.1', '-OsqnU'));
d_echo($oids . "\n");
$numPhase = count(explode("\n", $oids));
for ($i = 1; $i <= $numPhase; $i++) {
$freq_oid = ".1.3.6.1.4.1.705.1.6.2.1.3.{$i}";
$descr = 'Input';
if ($numPhase > 1) {
$descr .= " Phase {$i}";
}
$current = snmp_get($device, $freq_oid, '-Oqv');
if (!$current) {
$freq_oid .= '.0';
$current = snmp_get($device, $freq_oid, '-Oqv');
}
$current /= 10;
$type = 'mge-ups';
<?php
unset($mac_table);
echo 'ARP Table : ';
$ipNetToMedia_data = snmp_walk($device, 'ipNetToMediaPhysAddress', '-Oq', 'IP-MIB');
$ipNetToMedia_data = str_replace('ipNetToMediaPhysAddress.', '', trim($ipNetToMedia_data));
$ipNetToMedia_data = str_replace('IP-MIB::', '', trim($ipNetToMedia_data));
foreach (explode("\n", $ipNetToMedia_data) as $data) {
list($oid, $mac) = explode(' ', $data);
list($if, $first, $second, $third, $fourth) = explode('.', $oid);
$ip = $first . '.' . $second . '.' . $third . '.' . $fourth;
if ($ip != '...') {
$interface = dbFetchRow('SELECT * FROM `ports` WHERE `device_id` = ? AND `ifIndex` = ?', array($device['device_id'], $if));
list($m_a, $m_b, $m_c, $m_d, $m_e, $m_f) = explode(':', $mac);
$m_a = zeropad($m_a);
$m_b = zeropad($m_b);
$m_c = zeropad($m_c);
$m_d = zeropad($m_d);
$m_e = zeropad($m_e);
$m_f = zeropad($m_f);
$md_a = hexdec($m_a);
$md_b = hexdec($m_b);
$md_c = hexdec($m_c);
$md_d = hexdec($m_d);
$md_e = hexdec($m_e);
$md_f = hexdec($m_f);
$mac = "{$m_a}:{$m_b}:{$m_c}:{$m_d}:{$m_e}:{$m_f}";
$mac_table[$if][$mac]['ip'] = $ip;
$mac_table[$if][$mac]['ciscomac'] = "{$m_a}{$m_b}.{$m_c}{$m_d}.{$m_e}{$m_f}";
$clean_mac = $m_a . $m_b . $m_c . $m_d . $m_e . $m_f;
$mac_table[$if][$mac]['cleanmac'] = $clean_mac;
// rPDU2OutletMeteredConfigNearOverloadCurrentThreshold
$name_oid = '1.3.6.1.4.1.318.1.1.26.9.4.3.1.3.' . $index;
// rPDU2OutletMeteredStatusName
$voltage = snmp_get($device, $voltage_oid, '-Oqv', '');
$current = snmp_get($device, $current_oid, '-Oqv', '') / $precision;
$limit = snmp_get($device, $limit_oid, '-Oqv', '') / $voltage;
$lowlimit = snmp_get($device, $lowlimit_oid, '-Oqv', '') / $voltage;
$warnlimit = snmp_get($device, $warnlimit_oid, '-Oqv', '') / $voltage;
$descr = 'Outlet ' . $index . ' - ' . snmp_get($device, $name_oid, '-Oqv', '');
discover_sensor($valid['sensor'], 'current', $device, $current_oid, $index, $type, $descr, '10', '1', $lowlimit, null, $warnlimit, $limit, $current);
}
}
}
unset($oids);
// ATS
$oids = snmp_walk($device, 'atsConfigPhaseTableIndex', '-OsqnU', 'PowerNet-MIB');
if ($oids) {
$type = 'apc';
d_echo($oids . "\n");
$oids = trim($oids);
if ($oids) {
echo 'APC PowerNet-MIB ATS ';
}
$current_oid = '1.3.6.1.4.1.318.1.1.8.5.4.3.1.4.1.1.1';
// atsOutputCurrent
$limit_oid = '1.3.6.1.4.1.318.1.1.8.4.16.1.5.1';
// atsConfigPhaseOverLoadThreshold
$lowlimit_oid = '1.3.6.1.4.1.318.1.1.8.4.16.1.3.1';
// atsConfigPhaseLowLoadThreshold
$warnlimit_oid = '1.3.6.1.4.1.318.1.1.8.4.16.1.4.1';
// atsConfigPhaseNearOverLoadThreshold
<?php
/**
* Observium
*
* This file is part of Observium.
*
* @package observium
* @subpackage discovery
* @author Adam Armstrong <*****@*****.**>
* @copyright (C) 2006 - 2012 Adam Armstrong
*/
if (strstr($device['os'], 'drac')) {
$oids = snmp_walk($device, 'temperatureProbeStatus', '-Osqn', 'IDRAC-MIB-SMIv2');
if ($debug) {
echo $oids . "\n";
}
$oids = trim($oids);
if ($oids) {
echo 'Dell iDRAC';
}
foreach (explode("\n", $oids) as $data) {
$data = trim($data);
if ($data) {
list($oid, $status) = explode(' ', $data, 2);
if ($debug) {
echo 'status : ' . $status . "\n";
}
if ($status == 'ok') {
$split_oid = explode('.', $oid);
$temperature_id = $split_oid[count($split_oid) - 2] . '.' . $split_oid[count($split_oid) - 1];
list($ip, $value) = explode(" ", $ipRouteProto);
$tableRoute[$ip]['ipRouteProto'] = $value;
}
/*
///////////ipRouteAge//////////////////////
$oid = '.1.3.6.1.2.1.4.21.1.10';
$resultHelp = snmp_walk($device, $oid, "-Osqn", $mib, NULL);
$resultHelp = str_replace("$oid.", "", $resultHelp);
foreach (explode("\n", $resultHelp) as $ipRouteAge) {
list($ip,$value)=explode(" ",$ipRouteAge);
$tableRoute[$ip]['ipRouteAge']=$value;
} */
///////////ipRouteMask//////////////////////
$oid = '.1.3.6.1.2.1.4.21.1.11';
$resultHelp = snmp_walk($device, $oid, "-Osqn -Ln", $mib, NULL);
$resultHelp = trim($resultHelp);
$resultHelp = str_replace("{$oid}.", "", $resultHelp);
foreach (explode("\n", $resultHelp) as $ipRouteMask) {
list($ip, $value) = explode(" ", $ipRouteMask);
$tableRoute[$ip]['ipRouteMask'] = $value;
}
if ($debug) {
echo 'Table routage';
var_dump($tableRoute);
}
foreach ($tableRoute as $ipRoute) {
if (empty($ipRoute['ipRouteDest']) || $ipRoute['ipRouteDest'] == '') {
continue;
}
$oldRouteRow = dbFetchRow('select * from route where device_id = ? AND ipRouteDest = ? AND context_name = ?', array($device['device_id'], $ipRoute['ipRouteDest'], $device['context_name']));
<?php
/*
* LibreNMS module for Brocade NOS fanspeed sensor
*
* Copyright (c) 2016 Maxence POULAIN <*****@*****.**>
*
* This program is free software: you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation, either version 3 of the License, or (at your
* option) any later version. Please see LICENSE.txt at the top level of
* the source code distribution for details.
*/
if ($device['os'] == "nos") {
$oids = snmp_walk($device, '1.3.6.1.4.1.1588.2.1.1.1.1.22.1.2', '-Osqn');
$oids = trim($oids);
foreach (explode("\n", $oids) as $data) {
$data = trim($data);
if ($data and $data[37] == "2") {
$value_oid = ".1.3.6.1.4.1.1588.2.1.1.1.1.22.1.4." . $data[35];
$descr_oid = ".1.3.6.1.4.1.1588.2.1.1.1.1.22.1.5." . $data[35];
$value = snmp_get($device, $value_oid, '-Oqv');
$descr = snmp_get($device, $descr_oid, '-Oqv');
if (!strstr($descr, 'No') and !strstr($value, 'No')) {
$descr = str_replace('"', '', $descr);
$descr = trim($descr);
discover_sensor($valid['sensor'], 'temperature', $device, $value_oid, $data[35], 'nos', $descr, '1', '1', null, null, '80', '100', $value);
}
}
}
}
<?php
global $debug;
if ($config['enable_printers']) {
$valid_toner = array();
echo "Toner : ";
if ($device['os_group'] == 'printer') {
$oids = trim(snmp_walk($device, "1.3.6.1.2.1.43.11.1.1.3", "-OsqnU"));
/* Not parsed below, so let's not walk this for now*/
/*
if (!$oids)
{
$oids = trim(snmp_walk($device, "1.3.6.1.2.1.43.12.1.1.2.1", "-OsqnU"));
}
*/
if ($debug) {
echo $oids . "\n";
}
if ($oids) {
echo "Jetdirect ";
}
foreach (explode("\n", $oids) as $data) {
$data = trim($data);
if ($data) {
list($oid, $role) = explode(" ", $data);
$split_oid = explode('.', $oid);
$index = $split_oid[count($split_oid) - 1];
if (is_numeric($role)) {
$toner_oid = ".1.3.6.1.2.1.43.11.1.1.9.1.{$index}";
$descr_oid = ".1.3.6.1.2.1.43.11.1.1.6.1.{$index}";
$capacity_oid = ".1.3.6.1.2.1.43.11.1.1.8.1.{$index}";
$data = trim($data);
if ($data != '') {
list($oid) = explode(' ', $data);
$temperature_oid = ".1.3.6.1.4.1.6321.1.2.3.2.98.2.3.1.2.{$oid}";
$descr_oid = ".1.3.6.1.4.1.6321.1.2.3.2.98.2.3.1.6.{$oid}";
$descr = snmp_get($device, $descr_oid, '-Oqv', '');
$temperature = snmp_get($device, $temperature_oid, '-Oqv', '');
$descr = str_replace('"', '', $descr);
$current = $temperature;
discover_sensor($valid['sensor'], 'temperature', $device, $temperature_oid, $oid, 'calix', $descr, '1', '1', null, null, null, null, $current);
}
}
}
if (strpos($device['sysObjectID'], 'enterprises.6321.1.2.3.1') !== false) {
// E5-110
$oids = snmp_walk($device, 'iesSysTempCurValue', '-Osqn', 'E5-110-IESCOMMON-MIB', 'calix');
$oids = trim($oids);
$oids = str_replace('.1.3.6.1.4.1.6321.1.2.3.1.98.2.3.1.2.', '', $oids);
foreach (explode("\n", $oids) as $data) {
$data = trim($data);
if ($data != '') {
list($oid) = explode(' ', $data);
$temperature_oid = ".1.3.6.1.4.1.6321.1.2.3.1.98.2.3.1.2.{$oid}";
$descr_oid = ".1.3.6.1.4.1.6321.1.2.3.1.98.2.3.1.6.{$oid}";
$descr = snmp_get($device, $descr_oid, '-Oqv', '');
$temperature = snmp_get($device, $temperature_oid, '-Oqv', '');
$descr = str_replace('"', '', $descr);
$current = $temperature;
discover_sensor($valid['sensor'], 'temperature', $device, $temperature_oid, $oid, 'calix', $descr, '1', '1', null, null, null, null, $current);
}
}
echo 'APC In ';
}
$divisor = 1;
$type = 'apc';
foreach (explode("\n", $oids) as $data) {
$data = trim($data);
if ($data) {
list($oid, $current) = explode(' ', $data, 2);
$split_oid = explode('.', $oid);
$index = $split_oid[count($split_oid) - 1];
$oid = '1.3.6.1.4.1.318.1.1.8.5.3.2.1.4.' . $index;
$descr = 'Input Feed ' . chr(64 + $index);
discover_sensor($valid['sensor'], 'frequency', $device, $oid, "3.2.1.4.{$index}", $type, $descr, $divisor, '1', null, null, null, null, $current);
}
}
$oids = snmp_walk($device, '1.3.6.1.4.1.318.1.1.8.5.4.2.1.4', '-OsqnU', '');
d_echo($oids . "\n");
if ($oids) {
echo ' APC Out ';
}
$divisor = 1;
$type = 'apc';
foreach (explode("\n", $oids) as $data) {
$data = trim($data);
if ($data) {
list($oid, $current) = explode(' ', $data, 2);
$split_oid = explode('.', $oid);
$index = $split_oid[count($split_oid) - 3];
$oid = '1.3.6.1.4.1.318.1.1.8.5.4.2.1.4.' . $index;
$descr = 'Output Feed';
if (count(explode("\n", $oids)) > 1) {
$peer_ip_snmp = preg_replace('/:/', ' ', $peer_ip);
$peer_ip = preg_replace('/(\\S+\\s+\\S+)\\s/', '$1:', $peer_ip_snmp);
$peer_ip = str_replace('"', '', str_replace(' ', '', $peer_ip));
}
if ($peer && $peer_ip != '0.0.0.0') {
if ($debug) {
echo "Found peer {$peer_ip} (AS{$peer_as})\n";
}
$peerlist[] = array('ip' => $peer_ip, 'as' => $peer_as, 'ver' => $ver);
}
}
if ($device['os'] == 'junos') {
// Juniper BGP4-V2 MIB
// FIXME: needs a big cleanup! also see below.
// FIXME: is .0.ipv6 the only possible value here?
$result = snmp_walk($device, 'jnxBgpM2PeerRemoteAs.0.ipv6', '-Onq', 'BGP4-V2-MIB-JUNIPER', $config['install_dir'] . '/mibs/junos');
$peers = trim(str_replace('.1.3.6.1.4.1.2636.5.1.1.2.1.1.1.13.0.', '', $result));
foreach (explode("\n", $peers) as $peer) {
list($peer_ip_snmp, $peer_as) = explode(' ', $peer);
// Magic! Basically, takes SNMP form and finds peer IPs from the walk OIDs.
$peer_ip = Net_IPv6::compress(snmp2ipv6(implode('.', array_slice(explode('.', $peer_ip_snmp), count(explode('.', $peer_ip_snmp)) - 16))));
if ($peer) {
if ($debug) {
echo "Found peer {$peer_ip} (AS{$peer_as})\n";
}
$peerlist[] = array('ip' => $peer_ip, 'as' => $peer_as);
}
}
}
} else {
echo 'No BGP on host';
<?php
if ($device['os'] == "cometsystem-p85xx") {
$regexp = '/
\\.1\\.3\\.6\\.1\\.4\\.1\\.22626\\.1\\.5\\.2\\.
(?P<id>\\d+)
\\.
(?:
1\\.0 (?P<name>.*)|
3\\.0 (?P<temp_intval>.*)|
5\\.0 (?P<limit_high>.*)|
6\\.0 (?P<limit_low>.*)|
)
/x';
$oids = snmp_walk($device, ".1.3.6.1.4.1.22626.1.5.2", "-OsqnU", "");
#if ($debug) { echo($oids."\n"); }
if ($oids) {
$out = array();
foreach (explode("\n", $oids) as $line) {
preg_match($regexp, $line, $match);
if ($match['name']) {
$out[$match['id']]['name'] = $match['name'];
}
if ($match['temp_intval']) {
$out[$match['id']]['temp_intval'] = $match['temp_intval'];
}
if ($match['limit_high']) {
$out[$match['id']]['limit_high'] = $match['limit_high'];
}
if ($match['limit_low']) {
$out[$match['id']]['limit_low'] = $match['limit_low'];
<?php
// Supermicro Fanspeeds
if ($device['os'] == 'linux') {
$oids = snmp_walk($device, '1.3.6.1.4.1.10876.2.1.1.1.1.3', '-OsqnU', 'SUPERMICRO-HEALTH-MIB');
if ($debug) {
echo $oids . "\n";
}
$oids = trim($oids);
if ($oids) {
echo 'Supermicro ';
}
foreach (explode("\n", $oids) as $data) {
$data = trim($data);
if ($data) {
list($oid, $kind) = explode(' ', $data);
$split_oid = explode('.', $oid);
$index = $split_oid[count($split_oid) - 1];
if ($kind == 0) {
$fan_oid = "1.3.6.1.4.1.10876.2.1.1.1.1.4.{$index}";
$descr_oid = "1.3.6.1.4.1.10876.2.1.1.1.1.2.{$index}";
$limit_oid = "1.3.6.1.4.1.10876.2.1.1.1.1.6.{$index}";
$divisor_oid = "1.3.6.1.4.1.10876.2.1.1.1.1.9.{$index}";
$monitor_oid = "1.3.6.1.4.1.10876.2.1.1.1.1.10.{$index}";
$descr = snmp_get($device, $descr_oid, '-Oqv', 'SUPERMICRO-HEALTH-MIB');
$current = snmp_get($device, $fan_oid, '-Oqv', 'SUPERMICRO-HEALTH-MIB');
$low_limit = snmp_get($device, $limit_oid, '-Oqv', 'SUPERMICRO-HEALTH-MIB');
// $divisor = snmp_get($device, $divisor_oid, "-Oqv", "SUPERMICRO-HEALTH-MIB");
// ^ This returns an incorrect precision. At least using the raw value... I think. -TL
$divisor = '1';
$monitor = snmp_get($device, $monitor_oid, '-Oqv', 'SUPERMICRO-HEALTH-MIB');
<?php
/**
* Observium
*
* This file is part of Observium.
*
* @package observium
* @subpackage discovery
* @copyright (C) 2006-2014 Adam Armstrong
*
*/
// This could do with a decent rewrite using SNMP multi functions, instead of trim() and str_replace() voodoo.
echo " FOUNDRY-SN-AGENT-MIB ";
$oids = trim(snmp_walk($device, "snAgentTempSensorDescr", "-Osqn", "FOUNDRY-SN-AGENT-MIB:FOUNDRY-SN-ROOT-MIB", mib_dirs('foundry')));
$oids = str_replace(".1.3.6.1.4.1.1991.1.1.2.13.1.1.3.", "", $oids);
foreach (explode("\n", $oids) as $data) {
$data = trim($data);
if ($data != "") {
list($oid) = explode(" ", $data);
$temperature_oid = ".1.3.6.1.4.1.1991.1.1.2.13.1.1.4.{$oid}";
$descr_oid = ".1.3.6.1.4.1.1991.1.1.2.13.1.1.3.{$oid}";
$descr = snmp_get($device, $descr_oid, "-Oqv", "");
$temperature = snmp_get($device, $temperature_oid, "-Oqv", "");
if (!strstr($descr, "No") && !strstr($temperature, "No") && $descr != "" && $temperature != "0") {
$descr = str_replace("\"", "", $descr);
$descr = str_replace("temperature", "", $descr);
$descr = str_replace("temperature", "", $descr);
$descr = str_replace("sensor", "Sensor", $descr);
$descr = str_replace("Line module", "Slot", $descr);
$descr = str_replace("Switch Fabric module", "Fabric", $descr);
<?php
$name = 'dhcp-stats';
$app_id = $app['app_id'];
$options = '-O qv';
$mib = 'NET-SNMP-EXTEND-MIB';
$oid = '.1.3.6.1.4.1.8072.1.3.2.4.1.2.9.100.104.99.112.115.116.97.116.115';
$dhcpstats = snmp_walk($device, $oid, $options, $mib);
list($dhcp_total, $dhcp_active, $dhcp_expired, $dhcp_released, $dhcp_abandoned, $dhcp_reset, $dhcp_bootp, $dhcp_backup, $dhcp_free) = explode("\n", $dhcpstats);
$rrd_name = array('app', $name, $app_id);
$rrd_def = array('DS:dhcp_total:GAUGE:600:0:U', 'DS:dhcp_active:GAUGE:600:0:U', 'DS:dhcp_expired:GAUGE:600:0:U', 'DS:dhcp_released:GAUGE:600:0:U', 'DS:dhcp_abandoned:GAUGE:600:0:U', 'DS:dhcp_reset:GAUGE:600:0:U', 'DS:dhcp_bootp:GAUGE:600:0:U', 'DS:dhcp_backup:GAUGE:600:0:U', 'DS:dhcp_free:GAUGE:600:0:U');
$fields = array('dhcp_total' => $dhcp_total, 'dhcp_active' => $dhcp_active, 'dhcp_expired' => $dhcp_expired, 'dhcp_released' => $dhcp_released, 'dhcp_abandoned' => $dhcp_abandoned, 'dhcp_reset' => $dhcp_reset, 'dhcp_bootp' => $dhcp_bootp, 'dhcp_backup' => $dhcp_backup, 'dhcp_free' => $dhcp_free);
$tags = array('name' => $name, 'app_id' => $app_id, 'rrd_def' => $rrd_def, 'rrd_name' => $rrd_name);
data_update($device, 'app', $tags, $fields);
if ($config['enable_bgp'] && is_device_mib($device, 'BGP4-MIB')) {
// Get Local ASN
$bgpLocalAs = snmp_get($device, 'bgpLocalAs.0', '-OUQvn', 'BGP4-MIB');
$vendor_oids = array('BGP4-V2-MIB-JUNIPER' => array('vendor_use_index' => array('jnxBgpM2PeerRemoteAddr' => 1, 'jnxBgpM2PeerRemoteAddrType' => 1, 'jnxBgpM2PeerLocalAddr' => 1), 'vendor_PeerTable' => 'jnxBgpM2PeerTable', 'vendor_PeerAdminStatus' => 'jnxBgpM2PeerStatus', 'vendor_PeerRemoteAs' => 'jnxBgpM2PeerRemoteAs', 'vendor_PeerRemoteAddr' => 'jnxBgpM2PeerRemoteAddr', 'vendor_PeerLocalAddr' => 'jnxBgpM2PeerLocalAddr', 'vendor_PeerIdentifier' => 'jnxBgpM2PeerIdentifier', 'vendor_PeerIndex' => 'jnxBgpM2PeerIndex', 'vendor_PeerRemoteAddrType' => 'jnxBgpM2PeerRemoteAddrType', 'vendor_PrefixCountersSafi' => 'jnxBgpM2PrefixCountersSafi'), 'FORCE10-BGP4-V2-MIB' => array('vendor_PeerTable' => 'f10BgpM2PeerTable', 'vendor_PeerAdminStatus' => 'f10BgpM2PeerStatus', 'vendor_PeerRemoteAs' => 'f10BgpM2PeerRemoteAs', 'vendor_PeerRemoteAddr' => 'f10BgpM2PeerRemoteAddr', 'vendor_PeerLocalAddr' => 'f10BgpM2PeerLocalAddr', 'vendor_PeerIdentifier' => 'f10BgpM2PeerIdentifier', 'vendor_PeerIndex' => 'f10BgpM2PeerIndex', 'vendor_PeerRemoteAddrType' => 'f10BgpM2PeerRemoteAddrType', 'vendor_PrefixCountersSafi' => 'f10BgpM2PrefixCountersSafi'), 'ARISTA-BGP4V2-MIB' => array('vendor_use_index' => array('aristaBgp4V2PeerRemoteAddr' => 1, 'aristaBgp4V2PeerRemoteAddrType' => 1), 'vendor_PeerTable' => 'aristaBgp4V2PeerTable', 'vendor_PeerAdminStatus' => 'aristaBgp4V2PeerAdminStatus', 'vendor_PeerRemoteAs' => 'aristaBgp4V2PeerRemoteAs', 'vendor_PeerRemoteAddr' => 'aristaBgp4V2PeerRemoteAddr', 'vendor_PeerLocalAddr' => 'aristaBgp4V2PeerLocalAddr', 'vendor_PeerIdentifier' => 'aristaBgp4V2PeerRemoteIdentifier', 'vendor_PeerIndex' => '', 'vendor_PeerRemoteAddrType' => 'aristaBgp4V2PeerRemoteAddrType', 'vendor_PrefixCountersSafi' => 'aristaBgp4V2PrefixInPrefixes'));
$vendor_mib = FALSE;
foreach ($vendor_oids as $v_mib => $v_array) {
if (is_device_mib($device, $v_mib)) {
$vendor_mib = $v_mib;
// Set to current vendor mib
//echo(" $v_mib ");
foreach ($v_array as $v => $val) {
${$v} = $val;
}
if ($v_mib === 'BGP4-V2-MIB-JUNIPER' && $bgpLocalAs === '0') {
// On JunOS BGP4-MIB::bgpLocalAs.0 is always '0'.
$v_bgpLocalAs = trim(snmp_walk($device, 'jnxBgpM2PeerLocalAs', '-OUQvn', 'BGP4-V2-MIB-JUNIPER'));
list($bgpLocalAs) = explode("\n", $v_bgpLocalAs);
}
break;
}
}
// Some Old IOS-XR (ie 4.3.2) also return BGP4-MIB::bgpLocalAs.0 as '0'.
if ($vendor_mib === FALSE && $bgpLocalAs === '0' && is_device_mib($device, 'CISCO-BGP4-MIB')) {
$v_bgpLocalAs = snmp_get($device, 'cbgpLocalAs.0', '-OUQvn', 'CISCO-BGP4-MIB');
if (is_numeric($v_bgpLocalAs)) {
$bgpLocalAs = $v_bgpLocalAs;
}
}
// Discover BGP peers
/// NOTE. PeerIdentifier != PeerRemoteAddr
if (is_numeric($bgpLocalAs) && $bgpLocalAs != '0') {
echo "APC In ";
}
$divisor = 1;
$type = "apc";
foreach (explode("\n", $oids) as $data) {
$data = trim($data);
if ($data) {
list($oid, $current) = explode(" ", $data, 2);
$split_oid = explode('.', $oid);
$index = $split_oid[count($split_oid) - 1];
$oid = "1.3.6.1.4.1.318.1.1.8.5.3.2.1.4." . $index;
$descr = "Input Feed " . chr(64 + $index);
discover_sensor($valid['sensor'], 'frequency', $device, $oid, "3.2.1.4.{$index}", $type, $descr, $divisor, '1', NULL, NULL, NULL, NULL, $current);
}
}
$oids = snmp_walk($device, "1.3.6.1.4.1.318.1.1.8.5.4.2.1.4", "-OsqnU", "");
if ($debug) {
echo $oids . "\n";
}
if ($oids) {
echo " APC Out ";
}
$divisor = 1;
$type = "apc";
foreach (explode("\n", $oids) as $data) {
$data = trim($data);
if ($data) {
list($oid, $current) = explode(" ", $data, 2);
$split_oid = explode('.', $oid);
$index = $split_oid[count($split_oid) - 3];
$oid = "1.3.6.1.4.1.318.1.1.8.5.4.2.1.4." . $index;
$oids = snmp_walk($device, "isxModularDistModuleBreakerCurrent", "-OsqnU", "PowerNet-MIB");
if ($oids) {
echo " Modular APC Out ";
foreach (explode("\n", $oids) as $data) {
$data = trim($data);
if ($data) {
list($oid, $value) = explode(' ', $data);
$split_oid = explode('.', $oid);
$phase = $split_oid[count($split_oid) - 1];
$breaker = $split_oid[count($split_oid) - 2];
$index = str_pad($breaker, 2, "0", STR_PAD_LEFT) . "-" . $phase;
$descr = "Breaker {$breaker} Phase {$phase}";
discover_sensor($valid['sensor'], 'current', $device, $oid, $index, 'apc', $descr, $scale, $value);
}
}
$oids = snmp_walk($device, "isxModularDistSysCurrentAmps", "-OsqnU", "PowerNet-MIB");
foreach (explode("\n", $oids) as $data) {
$data = trim($data);
if ($data) {
list($oid, $value) = explode(' ', $data);
$split_oid = explode('.', $oid);
$phase = $split_oid[count($split_oid) - 1];
$index = ".{$phase}";
$descr = "Phase {$phase} overall";
discover_sensor($valid['sensor'], 'current', $device, $oid, $index, 'apc', $descr, $scale, $value);
}
}
}
#### ENVIRONMENTAL ###################################################################################
echo ' ';
$cache['apc'] = array();
/**
* SNMPWalk_array_num - performs a numeric SNMPWalk and returns an array containing $count indexes
* One Index:
* From: 1.3.6.1.4.1.9.9.166.1.15.1.1.27.18.655360 = 0
* To: $array['1.3.6.1.4.1.9.9.166.1.15.1.1.27.18']['655360'] = 0
* Two Indexes:
* From: 1.3.6.1.4.1.9.9.166.1.15.1.1.27.18.655360 = 0
* To: $array['1.3.6.1.4.1.9.9.166.1.15.1.1.27']['18']['655360'] = 0
* And so on...
* Think snmpwalk_cache_*_oid but for numeric data.
*
* Why is this useful?
* Some SNMP data contains a single index (eg. ifIndex in IF-MIB) and some is dual indexed
* (eg. PolicyIndex/ObjectsIndex in CISCO-CLASS-BASED-QOS-MIB).
* The resulting array allows us to easily access the top level index we want and iterate over the data from there.
*
* @param $device
* @param $OID
* @param int $indexes
* @internal param $string
* @return array
*/
function snmpwalk_array_num($device, $oid, $indexes = 1)
{
$array = array();
$string = snmp_walk($device, $oid, '-Osqn');
if ($string === false) {
// False means: No Such Object.
return false;
}
if ($string == "") {
// Empty means SNMP timeout or some such.
return null;
}
// Let's turn the string into something we can work with.
foreach (explode("\n", $string) as $line) {
if ($line[0] == '.') {
// strip the leading . if it exists.
$line = substr($line, 1);
}
list($key, $value) = explode(' ', $line, 2);
$prop_id = explode('.', $key);
$value = trim($value);
// if we have requested more levels that exist, set to the max.
if ($indexes > count($prop_id)) {
$indexes = count($prop_id) - 1;
}
for ($i = 0; $i < $indexes; $i++) {
// Pop the index off.
$index = array_pop($prop_id);
$value = array($index => $value);
}
// Rebuild our key
$key = implode('.', $prop_id);
// Add the entry to the master array
$array = array_replace_recursive($array, array($key => $value));
}
return $array;
}
<?php
$valid_toner = array();
if ($device['os_group'] == 'printer') {
$oids = trim(snmp_walk($device, 'SNMPv2-SMI::mib-2.43.12.1.1.2.1 ', '-OsqnU'));
if (!$oids) {
$oids = trim(snmp_walk($device, 'SNMPv2-SMI::mib-2.43.11.1.1.2.1 ', '-OsqnU'));
}
d_echo($oids . "\n");
if ($oids) {
echo 'Jetdirect ';
}
foreach (explode("\n", $oids) as $data) {
$data = trim($data);
if ($data) {
list($oid, $role) = explode(' ', $data);
$split_oid = explode('.', $oid);
$index = $split_oid[count($split_oid) - 1];
if (is_numeric($role)) {
//ricoh using private oids to expose toner levels
if ($os == 'ricoh') {
$toner_oid = ".1.3.6.1.4.1.367.3.2.1.2.24.1.1.5.{$index}";
$descr_oid = ".1.3.6.1.4.1.367.3.2.1.2.24.1.1.3.{$index}";
} else {
$toner_oid = ".1.3.6.1.2.1.43.11.1.1.9.1.{$index}";
$descr_oid = ".1.3.6.1.2.1.43.11.1.1.6.1.{$index}";
$capacity_oid = ".1.3.6.1.2.1.43.11.1.1.8.1.{$index}";
}
$descr = trim(str_replace("\n", '', str_replace('"', '', snmp_get($device, $descr_oid, '-Oqv'))));
if ($descr != '') {
$current = snmp_get($device, $toner_oid, '-Oqv');
function poll_sensor($device, $class, $unit)
{
global $config, $memcache, $agent_sensors;
foreach (dbFetchRows('SELECT * FROM `sensors` WHERE `sensor_class` = ? AND `device_id` = ?', array($class, $device['device_id'])) as $sensor) {
echo 'Checking (' . $sensor['poller_type'] . ") {$class} " . $sensor['sensor_descr'] . '... ';
$sensor_value = '';
if ($sensor['poller_type'] == 'snmp') {
if ($device['os'] == 'siklu') {
$mib = ':RADIO-BRIDGE-MIB';
} else {
$mib = '';
}
if ($class == 'temperature') {
if ($device['os'] == 'netapp') {
include 'includes/polling/temperatures/netapp.inc.php';
} else {
// Try 5 times to get a valid temp reading
for ($i = 0; $i < 5; $i++) {
d_echo("Attempt {$i} ");
$sensor_value = trim(str_replace('"', '', snmp_get($device, $sensor['sensor_oid'], '-OUqnv', "SNMPv2-MIB{$mib}")));
preg_match('/[\\d\\.]+/', $sensor_value, $temp_response);
if (!empty($temp_response[0])) {
$sensor_value = $temp_response[0];
}
if (is_numeric($sensor_value) && $sensor_value != 9999) {
break;
// TME sometimes sends 999.9 when it is right in the middle of an update;
}
sleep(1);
// end if
}
}
//end if
} else {
if ($class == 'state') {
$sensor_value = trim(str_replace('"', '', snmp_walk($device, $sensor['sensor_oid'], '-Oevq', 'SNMPv2-MIB')));
} else {
if ($class == 'dbm') {
$sensor_value = trim(str_replace('"', '', snmp_get($device, $sensor['sensor_oid'], '-OUqnv', "SNMPv2-MIB{$mib}")));
//iosxr does not expose dbm values through SNMP so we convert Watts to dbm to have a nice graph to show
if ($device['os'] == "iosxr") {
$sensor_value = round(10 * log10($sensor_value / 1000), 3);
}
} else {
if ($sensor['sensor_type'] == 'apc') {
$sensor_value = trim(str_replace('"', '', snmp_walk($device, $sensor['sensor_oid'], '-OUqnv', "SNMPv2-MIB:PowerNet-MIB{$mib}")));
} else {
$sensor_value = trim(str_replace('"', '', snmp_get($device, $sensor['sensor_oid'], '-OUqnv', "SNMPv2-MIB{$mib}")));
}
}
}
}
//end if
unset($mib);
} else {
if ($sensor['poller_type'] == 'agent') {
if (isset($agent_sensors)) {
$sensor_value = $agent_sensors[$class][$sensor['sensor_type']][$sensor['sensor_index']]['current'];
} else {
echo "no agent data!\n";
continue;
}
} else {
if ($sensor['poller_type'] == 'ipmi') {
echo " already polled.\n";
// ipmi should probably move here from the ipmi poller file (FIXME)
continue;
} else {
echo "unknown poller type!\n";
continue;
}
}
}
//end if
if ($sensor_value == -32768) {
echo 'Invalid (-32768) ';
$sensor_value = 0;
}
if ($sensor['sensor_divisor']) {
$sensor_value = $sensor_value / $sensor['sensor_divisor'];
}
if ($sensor['sensor_multiplier']) {
$sensor_value = $sensor_value * $sensor['sensor_multiplier'];
}
$rrd_file = get_sensor_rrd($device, $sensor);
if (!is_file($rrd_file)) {
rrdtool_create($rrd_file, '--step 300
DS:sensor:GAUGE:600:-20000:20000 ' . $config['rrd_rra']);
}
echo "{$sensor_value} {$unit}\n";
$fields = array('sensor' => $sensor_value);
rrdtool_update($rrd_file, $fields);
// FIXME also warn when crossing WARN level!!
if ($sensor['sensor_limit_low'] != '' && $sensor['sensor_current'] > $sensor['sensor_limit_low'] && $sensor_value <= $sensor['sensor_limit_low'] && $sensor['sensor_alert'] == 1) {
echo 'Alerting for ' . $device['hostname'] . ' ' . $sensor['sensor_descr'] . "\n";
log_event(ucfirst($class) . ' ' . $sensor['sensor_descr'] . ' under threshold: ' . $sensor_value . " {$unit} (< " . $sensor['sensor_limit_low'] . " {$unit})", $device, $class, $sensor['sensor_id']);
} else {
if ($sensor['sensor_limit'] != '' && $sensor['sensor_current'] < $sensor['sensor_limit'] && $sensor_value >= $sensor['sensor_limit'] && $sensor['sensor_alert'] == 1) {
echo 'Alerting for ' . $device['hostname'] . ' ' . $sensor['sensor_descr'] . "\n";
log_event(ucfirst($class) . ' ' . $sensor['sensor_descr'] . ' above threshold: ' . $sensor_value . " {$unit} (> " . $sensor['sensor_limit'] . " {$unit})", $device, $class, $sensor['sensor_id']);
}
}
dbUpdate(array('sensor_current' => $sensor_value, 'lastupdate' => array('NOW()')), 'sensors', '`sensor_class` = ? AND `sensor_id` = ?', array($class, $sensor['sensor_id']));
}
//end foreach
}
*/
$ceragon_type = $poll_device['sysObjectID'];
$hardware = rewrite_ceraos_hardware($ceragon_type, $device);
// function in ./includes/rewrites.php
if (stristr('IP10', $hardware)) {
$serial = snmp_get($device, 'genEquipUnitIDUSerialNumber.0', '-Oqv', 'MWRM-UNIT-MIB');
} else {
$serial = snmp_get($device, 'genEquipInventorySerialNumber.127', '-Oqv', 'MWRM-UNIT-MIB');
}
$multi_get_array = snmp_get_multi($device, 'genEquipMngSwIDUVersionsRunningVersion.1 genEquipUnitLatitude.0 genEquipUnitLongitude.0', '-OQU', 'MWRM-RADIO-MIB');
d_echo($multi_get_array);
$version = $multi_get_array[1]['MWRM-UNIT-MIB::genEquipMngSwIDUVersionsRunningVersion'];
$latitude = $multi_get_array[0]['MWRM-UNIT-MIB::genEquipUnitLatitude'];
$longitude = $multi_get_array[0]['MWRM-UNIT-MIB::genEquipUnitLongitude'];
$ifIndex_array = array();
$ifIndex_array = explode("\n", snmp_walk($device, 'ifIndex', '-Oqv', 'IF-MIB'));
d_echo($ifIndex_array);
$snmp_get_oids = "";
foreach ($ifIndex_array as $ifIndex) {
$snmp_get_oids .= "ifDescr.{$ifIndex} ifName.{$ifIndex} ";
}
$num_radios = 0;
$ifDescr_array = array();
$ifDescr_array = snmp_get_multi($device, $snmp_get_oids, '-OQU', 'IF-MIB');
d_echo($ifDescr_array);
foreach ($ifIndex_array as $ifIndex) {
d_echo("\$ifDescr_array[{$ifIndex}]['IF-MIB::ifDescr'] = " . $ifDescr_array[$ifIndex]['IF-MIB::ifDescr'] . "\n");
if (stristr($ifDescr_array[$ifIndex]['IF-MIB::ifDescr'], "Radio")) {
$num_radios = $num_radios + 1;
}
}
<?php
// RFC1628 UPS
if (isset($config['modules_compat']['rfc1628'][$device['os']]) && $config['modules_compat']['rfc1628'][$device['os']]) {
echo 'RFC1628 ';
$oids = trim(snmp_walk($device, '1.3.6.1.2.1.33.1.3.2.0', '-OsqnU'));
d_echo($oids . "\n");
list($unused, $numPhase) = explode(' ', $oids);
for ($i = 1; $i <= $numPhase; $i++) {
$freq_oid = "1.3.6.1.2.1.33.1.3.3.1.2.{$i}";
$descr = 'Input';
if ($numPhase > 1) {
$descr .= " Phase {$i}";
}
$current = snmp_get($device, $freq_oid, '-Oqv') / 10;
$type = 'rfc1628';
$divisor = 10;
if ($device['os'] == 'huaweiups') {
$divisor = 100;
}
$index = '3.2.0.' . $i;
discover_sensor($valid['sensor'], 'frequency', $device, $freq_oid, $index, $type, $descr, $divisor, '1', null, null, null, null, $current);
}
$freq_oid = '1.3.6.1.2.1.33.1.4.2.0';
$descr = 'Output';
$current = snmp_get($device, $freq_oid, '-Oqv') / 10;
$type = 'rfc1628';
$divisor = 10;
if ($device['os'] == 'huaweiups') {
$divisor = 100;
}
<?php
if ($device['os'] == "drac") {
$oids = snmp_walk($device, "powerSupplyIndex.1", "-OsqnU", "IDRAC-MIB-SMIv2");
d_echo($oids . "\n");
$oids = trim($oids);
if ($oids) {
echo "Dell iDRAC";
}
foreach (explode("\n", $oids) as $data) {
$data = trim($data);
if ($data) {
list($oid, $kind) = explode(" ", $data);
$split_oid = explode('.', $oid);
$index = $split_oid[count($split_oid) - 1];
$voltage_oid = ".1.3.6.1.4.1.674.10892.5.4.600.12.1.16.1.{$index}";
$descr_oid = "powerSupplyLocationName.1.{$index}";
$limit_oid = "powerSupplyMaximumInputVoltage.1.{$index}";
$descr = trim(snmp_get($device, $descr_oid, "-Oqv", "IDRAC-MIB-SMIv2"), '"');
$descr = preg_replace("/(Status)/", "", $descr);
$current = snmp_get($device, $voltage_oid, "-Oqv", "IDRAC-MIB-SMIv2");
$high_limit = snmp_get($device, $limit_oid, "-Oqv", "IDRAC-MIB-SMIv2");
$divisor = "1";
discover_sensor($valid['sensor'], 'voltage', $device, $voltage_oid, $index, 'drac', $descr, $divisor, '1', 0, null, null, $high_limit, $current);
}
}
}
$rds = str_replace(".1.3.6.1.3.118.1.2.2.1.3.", "", $rds);
$descrs_oid = ".1.3.6.1.3.118.1.2.2.1.2";
$ports_oid = ".1.3.6.1.3.118.1.2.1.1.2";
} else {
$vpnmib = "MPLS-L3VPN-STD-MIB";
$rds = str_replace(".1.3.6.1.2.1.10.166.11.1.2.2.1.4.", "", $rds);
$descrs_oid = ".1.3.6.1.2.1.10.166.11.1.2.2.1.3";
$ports_oid = ".1.3.6.1.2.1.10.166.11.1.2.1.1.2";
}
if ($debug) {
echo "\n[DEBUG]\nUsing {$vpnmib}\n[/DEBUG]\n";
echo "\n[DEBUG OIDS]\n{$rds}\n[/DEBUG]\n";
}
$rds = trim($rds);
$descrs = snmp_walk($device, $descrs_oid, "-Osqn", $vpnmib, NULL);
$ports = snmp_walk($device, $ports_oid, "-Osqn", $vpnmib, NULL);
$descrs = trim(str_replace("{$descrs_oid}.", "", $descrs));
$ports = trim(str_replace("{$ports_oid}.", "", $ports));
$descr_table = array();
$port_table = array();
foreach (explode("\n", $descrs) as $descr) {
$t = explode(" ", $descr, 2);
$descr_table[$t[0]] = $t[1];
}
foreach (explode("\n", $ports) as $port) {
$t = explode(" ", $port);
$dotpos = strrpos($t[0], ".");
$vrf_oid = substr($t[0], 0, $dotpos);
$port_id = substr($t[0], $dotpos + 1);
if (empty($port_table[$vrf_oid])) {
$port_table[$vrf_oid][0] = $port_id;
if ($oids) {
echo "Areca Controller ";
}
$precision = 1;
foreach (explode("\n", $oids) as $data) {
$data = trim($data);
if ($data) {
list($oid, $descr) = explode(" ", $data, 2);
$split_oid = explode('.', $oid);
$index = $split_oid[count($split_oid) - 1];
$oid = "1.3.6.1.4.1.18928.1.2.2.1.10.1.3." . $index;
$current = snmp_get($device, $oid, "-Oqv", "");
discover_sensor($valid['sensor'], 'temperature', $device, $oid, $index, $type, trim($descr, '"'), 1, 1, NULL, NULL, NULL, NULL, $current);
}
}
$oids = snmp_walk($device, "1.3.6.1.4.1.18928.1.2.2.1.8.1.2", "-OsqnU", "");
if ($debug) {
echo $oids . "\n";
}
if ($oids) {
echo "Areca ";
}
foreach (explode("\n", $oids) as $data) {
$data = trim($data);
if ($data) {
list($oid, $descr) = explode(" ", $data, 2);
$split_oid = explode('.', $oid);
$index = $split_oid[count($split_oid) - 1];
$oid = "1.3.6.1.4.1.18928.1.2.2.1.8.1.3." . $index;
$current = snmp_get($device, $oid, "-Oqv", "");
if (trim($descr, '"') == 'Battery Status') {
