<?php
/**
* Observium
*
* This file is part of Observium.
*
* @package observium
* @subpackage poller
* @copyright (C) 2006-2013 Adam Armstrong, (C) 2013-2016 Observium Limited
*
*/
// Force rediscover os if os definition changed
if (!isset($config['os'][$device['os']])) {
print_debug('OS name change detected, forced os rediscover.');
force_discovery($device, 'os');
}
// Cache hardware/version/serial info from ENTITY-MIB (if possible use inventory module data)
if (is_device_mib($device, 'ENTITY-MIB') && (in_array($device['os_group'], array('unix', 'cisco')) || in_array($device['os'], array('acme', 'nos', 'ibmnos', 'acsw', 'fabos', 'wlc', 'h3c', 'hh3c', 'hpuww')))) {
// Get entPhysical tables for some OS and OS groups
if ($config['discovery_modules']['inventory']) {
$entPhysical = dbFetchRow('SELECT * FROM `entPhysical` WHERE `device_id` = ? AND `entPhysicalContainedIn` = ?', array($device['device_id'], '0'));
} else {
switch (TRUE) {
case $device['os_group'] == 'cisco' || in_array($device['os'], array('acme', 'h3c', 'hh3c')):
$oids = 'entPhysicalDescr.1 entPhysicalSerialNum.1 entPhysicalModelName.1 entPhysicalContainedIn.1 entPhysicalName.1 entPhysicalSoftwareRev.1';
break;
case $device['os'] == 'qnap':
$oids = 'entPhysicalDescr.1 entPhysicalName.1 entPhysicalSerialNum.1 entPhysicalFirmwareRev.1';
break;
case $device['os'] == 'ibmnos':
* Observium
*
* This file is part of Observium.
*
* @package observium
* @subpackage poller
* @copyright (C) 2006-2013 Adam Armstrong, (C) 2013-2016 Observium Limited
*
*/
$index = $storage['storage_index'];
if (!is_array($cache_storage['NIMBLE-MIB'])) {
foreach (array('volSizeLow', 'volSizeHigh', 'volUsageLow', 'volUsageHigh', 'volOnline') as $param) {
$cache_storage['NIMBLE-MIB'] = snmpwalk_cache_oid($device, $param, $cache_storage['NIMBLE-MIB'], 'NIMBLE-MIB');
}
if (OBS_DEBUG > 1 && count($cache_storage['NIMBLE-MIB'])) {
print_vars($cache_storage['NIMBLE-MIB']);
}
}
$entry = $cache_storage['NIMBLE-MIB'][$index];
// FIXME, probably need additional field for storages like OperStatus up/down
$ignore = in_array($entry['volOnline'], array('0', 'false')) ? 1 : 0;
if ($storage['storage_ignore'] != $ignore) {
force_discovery($device, 'storage');
}
$storage['units'] = 1048576;
// Hardcode units. In MIB is written that bytes, but really Mbytes
$storage['size'] = snmp_size64_high_low($entry['volSizeHigh'], $entry['volSizeLow']) * $storage['units'];
$storage['used'] = snmp_size64_high_low($entry['volUsageHigh'], $entry['volUsageLow']) * $storage['units'];
$storage['free'] = $storage['size'] - $storage['used'];
unset($index, $entry, $ignore);
// EOF
$cache_storage = array();
}
// This cache used also in storage module
$table_rows = array();
$sql = "SELECT * FROM `mempools`";
$sql .= " LEFT JOIN `mempools-state` USING (`mempool_id`)";
$sql .= " WHERE `device_id` = ?";
foreach (dbFetchRows($sql, array($device['device_id'])) as $mempool) {
$mib_lower = strtolower($mempool['mempool_mib']);
$file = $config['install_dir'] . "/includes/polling/mempools/" . $mib_lower . ".inc.php";
if (is_file($file)) {
$cache_mempool = NULL;
$index = $mempool['mempool_index'];
include $file;
} else {
force_discovery($device, 'mempools');
continue;
}
// FIXME. rename precision to scale
if (!$mempool['mempool_precision']) {
$mempool['mempool_precision'] = 1;
}
if (isset($mempool['total']) && isset($mempool['used'])) {
$mempool['perc'] = round($mempool['used'] / $mempool['total'] * 100, 2);
$mempool['total'] *= $mempool['mempool_precision'];
$mempool['used'] *= $mempool['mempool_precision'];
} else {
if (isset($mempool['total']) && isset($mempool['free'])) {
$mempool['used'] = $mempool['total'] - $mempool['free'];
$mempool['perc'] = round($mempool['used'] / $mempool['total'] * 100, 2);
$mempool['total'] *= $mempool['mempool_precision'];
$c_table_row[] = $cbgpPeerDeniedPrefixes;
$c_table_row[] = $cbgpPeerAdvertisedPrefixes;
$c_table_rows[] = $c_table_row;
unset($c_table_row);
}
# while
}
# os_group=cisco | vendors
}
// End While loop on peers
if (count($table_rows)) {
echo PHP_EOL;
$headers = array('%WPeer IP%n', '%WASN%n', '%WAS%n', '%WAdmin%n', '%WState%n', '%WLocal IP%n', '%WEstablished Time%n', '%WLast Update%n');
print_cli_table($table_rows, $headers, "Sessions");
$headers = array('%WPeer IP%n', '%WASN%n', '%WAFI/SAFI%n', '%WAccepted Pfx%n', '%WDenied Pfx%n', '%WAdvertised Pfx%n');
print_cli_table($c_table_rows, $headers, "Address Families");
}
foreach ($p_list as $peer_ip => $entry) {
// Check if new peers found
$force_discovery = $force_discovery || !empty($entry);
}
if ($force_discovery) {
// Force rediscover bgp peers
print_debug("BGP peers list for this device changed, force rediscover BGP.");
force_discovery($device, 'bgp-peers');
}
}
// End check for BGP support
// Clean
unset($bgp_peers, $vendor_peers, $vendor_mib, $cisco_version, $cisco_peers, $c_prefixes);
// EOF
check_entity('sla', $sla, $metrics);
//echo("SLA " . $sla['sla_index'] . ": " . $sla['rtt_type'] . " " . $sla['sla_owner'] . " " . $sla['sla_tag']. "... ");
//echo($sla_state['rtt_value'] . 'ms at ' . format_unixtime($sla_state['rtt_unixtime']) . ', Sense code - "' . $sla_state['rtt_sense'] . '"');
$table_row = array();
$table_row[] = "SLA " . $sla['sla_index'];
$table_row[] = $sla['sla_mib'];
$table_row[] = $sla['rtt_type'];
$table_row[] = $sla['sla_owner'];
$table_row[] = $sla['sla_tag'];
$table_row[] = $sla_state['rtt_sense'];
$table_row[] = $sla_state['rtt_value'] . 'ms';
$table_rows[] = $table_row;
unset($table_row);
} else {
echo 'NaN';
$rrd_value = 'U';
}
rrdtool_create($device, $rrd_filename, $rrd_ds);
rrdtool_update($device, $rrd_filename, 'N:' . $rrd_value);
unset($rrd_ds, $rrd_value, $rrd_filename);
}
}
echo PHP_EOL;
$headers = array('%WLabel%n', '%WMIB%n', '%WType%n', '%WOwner%n', '%WTag%n', '%WSense%n', '%WResponse%n');
print_cli_table($table_rows, $headers);
if ($sla_db_count != $sla_snmp_count) {
// Force rediscover slas
print_debug("SLA total count for this device changed (DB: {$sla_db_count}, SNMP: {$sla_snmp_count}), force rediscover SLAs.");
force_discovery($device, 'sla');
}
// EOF
<?php
/**
* Observium
*
* This file is part of Observium.
*
* @package observium
* @subpackage update
* @copyright (C) 2006-2013 Adam Armstrong, (C) 2013-2016 Observium Limited
*
*/
// This is is a fix for incorrect rrd file rename after r7839
foreach (dbFetchRows("SELECT * FROM `devices` WHERE `os` = ? OR `os` = ?;", array('nos', 'fabos')) as $entry) {
$status = rename_rrd($entry, 'processor-swCpuOrMemoryUsage-1.rrd', 'processor-swCpuUsage-0.rrd');
if ($status) {
echo '.';
force_discovery($entry);
}
}
// EOF
// Update SQL State
if (is_numeric($pw['pwUptime'])) {
dbUpdate($metrics, 'pseudowires-state', '`pseudowire_id` = ?', array($pw['pseudowire_id']));
} else {
$metrics['pseudowire_id'] = $pw['pseudowire_id'];
dbInsert($metrics, 'pseudowires-state');
}
// Add table row
$table_row = array();
$table_row[] = $pw['pwID'];
$table_row[] = $pw['mib'];
$table_row[] = $pw['pwType'];
$table_row[] = $pw['pwPsnType'];
$table_row[] = $pw['peer_addr'];
$table_row[] = $metrics['pwOperStatus'];
$table_row[] = formatUptime($pw_uptime);
$table_rows[] = $table_row;
unset($table_row);
}
}
}
echo PHP_EOL;
$headers = array('%WpwID%n', '%WMIB%n', '%WType%n', '%WPsnType%n', '%WPeer%n', '%WOperStatus%n', '%WUptime%n');
print_cli_table($table_rows, $headers);
if ($pseudowires_db_count != $pseudowires_snmp_count) {
// Force rediscover Pseudowires
print_debug("Pseudowires total count for this device changed (DB: {$pseudowires_db_count}, SNMP: {$pseudowires_snmp_count}), force rediscover Pseudowires.");
force_discovery($device, 'pseudowires');
}
unset($pseudowires_db, $cache_pseudowires, $pseudowire_polled_time, $pw, $pw_poll, $pw_values, $pw_uptime, $oids, $metrics, $table_rows);
// EOF
echo '.';
break;
case '1.3.6.1.4.1.2254.2.4.10.1.0':
rename_rrd($device, 'sensor-temperature-DeltaUPS-10.1.0.rrd', 'sensor-temperature-DeltaUPS-MIB-dupsEnvTemperature-0.rrd');
echo '.';
break;
case '1.3.6.1.4.1.2254.2.4.7.9.0':
rename_rrd($device, 'sensor-temperature-DeltaUPS-7.9.0.rrd', 'sensor-temperature-DeltaUPS-MIB-dupsTemperature-0.rrd');
echo '.';
break;
case '1.3.6.1.4.1.2254.2.4.7.6.0':
rename_rrd($device, 'sensor-voltage-DeltaUPS-7.6.0.rrd', 'sensor-voltage-DeltaUPS-MIB-dupsBatteryVoltage-0.rrd');
echo '.';
break;
case '1.3.6.1.4.1.2254.2.4.5.4.0':
rename_rrd($device, 'sensor-voltage-DeltaUPS-5.4.0.rrd', 'sensor-voltage-DeltaUPS-MIB-dupsOutputVoltage1-0.rrd');
echo '.';
break;
case '1.3.6.1.4.1.2254.2.4.4.3.0':
rename_rrd($device, 'sensor-voltage-DeltaUPS-4.3.0.rrd', 'sensor-voltage-DeltaUPS-MIB-dupsInputVoltage1-0.rrd');
echo '.';
break;
case '1.3.6.1.4.1.2254.2.4.6.3.0':
rename_rrd($device, 'sensor-voltage-DeltaUPS-6.3.0.rrd', 'sensor-voltage-DeltaUPS-MIB-dupsBypassVoltage1-0.rrd');
echo '.';
break;
}
force_discovery($device, array('sensors'));
}
}
// EOF