public function temper_ajax()
{
$array_temper = array();
$this->load->helper(array('printerstate', 'errorcode'));
$array_temper = PrinterState_getExtruderTemperaturesAsArray();
if (count($array_temper)) {
if (isset($array_temper[PRINTERSTATE_LEFT_EXTRUD])) {
if ($this->config->item('nb_extruder') >= 2) {
$array_temper['left'] = $array_temper[PRINTERSTATE_LEFT_EXTRUD];
}
unset($array_temper[PRINTERSTATE_LEFT_EXTRUD]);
}
if (isset($array_temper[PRINTERSTATE_RIGHT_EXTRUD])) {
$array_temper['right'] = $array_temper[PRINTERSTATE_RIGHT_EXTRUD];
unset($array_temper[PRINTERSTATE_RIGHT_EXTRUD]);
}
if (isset($array_temper[PRINTERSTATE_HEAT_BED])) {
$array_temper['bed'] = $array_temper[PRINTERSTATE_HEAT_BED];
unset($array_temper[PRINTERSTATE_HEAT_BED]);
}
$this->output->set_status_header(200);
print json_encode($array_temper);
return;
}
$this->output->set_status_header(403);
return;
}
function PrinterState_checkStatusAsArray($extra_info = TRUE)
{
$command = '';
$output = array();
$ret_val = 0;
$data_json = array();
$temp_data[PRINTERSTATE_TITLE_LASTERROR] = array();
$time_start = NULL;
$status_current = '';
// if we need duration, the function that get duration by id is necessary
// and we must stock print list id somewhere in json file
$CI =& get_instance();
$CI->load->helper('corestatus');
if (CoreStatus_checkInUSB()) {
$data_json[PRINTERSTATE_TITLE_STATUS] = CORESTATUS_VALUE_USB;
return $data_json;
} else {
if (CoreStatus_checkInConnection()) {
$data_json[PRINTERSTATE_TITLE_STATUS] = CORESTATUS_VALUE_WAIT_CONNECT;
return $data_json;
}
}
$ret_val = CoreStatus_checkInIdle($status_current, $status_json);
if ($ret_val == TRUE) {
$data_json[PRINTERSTATE_TITLE_STATUS] = CORESTATUS_VALUE_IDLE;
//TODO think about if we need to display last error as 200 (error_ok) or not
if (array_key_exists(CORESTATUS_TITLE_LASTERROR, $status_json) && !is_null($status_json[CORESTATUS_TITLE_LASTERROR]) && $status_json[CORESTATUS_TITLE_LASTERROR] != ERROR_OK) {
// $data_json[PRINTERSTATE_TITLE_EXTEND_PRM][PRINTERSTATE_TITLE_LASTERROR] = $status_json[CORESTATUS_TITLE_LASTERROR];
// $data_json[PRINTERSTATE_TITLE_EXTEND_PRM][PRINTERSTATE_TITLE_DETAILMSG] = $status_json[CORESTATUS_TITLE_MESSAGE];
$data_json[PRINTERSTATE_TITLE_EXTEND_PRM][PRINTERSTATE_TITLE_SLICE_ERR] = $status_json[CORESTATUS_TITLE_LASTERROR] . ' ' . $status_json[CORESTATUS_TITLE_MESSAGE];
}
} else {
if ($ret_val == FALSE) {
$temp_data = array();
$status_old = $status_current;
PrinterState_checkBusyStatus($status_current, $temp_data);
if (in_array($status_current, array(CORESTATUS_VALUE_SLICE, CORESTATUS_VALUE_PRINT))) {
$data_json[PRINTERSTATE_TITLE_PERCENT] = $temp_data[PRINTERSTATE_TITLE_PERCENT];
}
$data_json[PRINTERSTATE_TITLE_STATUS] = $status_current;
// return error code in the first time when we have error from slicing=>idle
if ($status_old == CORESTATUS_VALUE_SLICE && $status_current == CORESTATUS_VALUE_IDLE && array_key_exists(PRINTERSTATE_TITLE_LASTERROR, $temp_data)) {
// $data_json[PRINTERSTATE_TITLE_EXTEND_PRM][PRINTERSTATE_TITLE_LASTERROR] = $temp_data[PRINTERSTATE_TITLE_LASTERROR];
// $data_json[PRINTERSTATE_TITLE_EXTEND_PRM][PRINTERSTATE_TITLE_DETAILMSG] = $temp_data[PRINTERSTATE_TITLE_DETAILMSG];
$data_json[PRINTERSTATE_TITLE_EXTEND_PRM][PRINTERSTATE_TITLE_SLICE_ERR] = $temp_data[PRINTERSTATE_TITLE_LASTERROR] . ' ' . $temp_data[PRINTERSTATE_TITLE_DETAILMSG];
} else {
if ($status_current == CORESTATUS_VALUE_PRINT) {
$print_operation = PRINTERSTATE_VALUE_PRINT_OPERATION_PRINT;
$array_status = array();
// add temperature
if ($extra_info == TRUE && $data_json[PRINTERSTATE_TITLE_PERCENT] != 100) {
$data_temperature = PrinterState_getExtruderTemperaturesAsArray();
if (!is_array($data_temperature)) {
// log internal error
$CI->load->helper('printerlog');
PrinterLog_logError('API error when getting temperatures in printing', __FILE__, __LINE__);
} else {
$data_json[PRINTERSTATE_TITLE_EXTEND_PRM][PRINTERSTATE_TITLE_EXT_TEMP_L] = array_key_exists(PRINTERSTATE_LEFT_EXTRUD, $data_temperature) ? $data_temperature[PRINTERSTATE_LEFT_EXTRUD] : 0;
$data_json[PRINTERSTATE_TITLE_EXTEND_PRM][PRINTERSTATE_TITLE_EXT_TEMP_R] = array_key_exists(PRINTERSTATE_RIGHT_EXTRUD, $data_temperature) ? $data_temperature[PRINTERSTATE_RIGHT_EXTRUD] : 0;
$data_json[PRINTERSTATE_TITLE_EXTEND_PRM][PRINTERSTATE_TITLE_EXT_TEMP_B] = array_key_exists(PRINTERSTATE_HEAT_BED, $data_temperature) ? $data_temperature[PRINTERSTATE_HEAT_BED] : 0;
}
}
// try to calculate time remained when percentage is passed offset
$ret_val = CoreStatus_getStatusArray($array_status);
if ($ret_val == TRUE && isset($array_status[CORESTATUS_TITLE_STARTTIME]) && isset($array_status[CORESTATUS_TITLE_ESTIMATE_T])) {
$time_pass = time() - $array_status[CORESTATUS_TITLE_STARTTIME];
$data_json[PRINTERSTATE_TITLE_PASSTIME] = $time_pass;
if (isset($data_json[PRINTERSTATE_TITLE_PERCENT]) && ($time_pass >= PRINTERSTATE_VALUE_OFST_TO_CAL_TIME || $data_json[PRINTERSTATE_TITLE_PERCENT] >= PRINTERSTATE_VALUE_OFST_TO_CAL_PCT)) {
// rest time = total time - passed time
// total time = estimate time (by filament) * (1 - percentage ^ 0.5) + estimate time (by time) * percentage ^ 0.5
// estimate time (by time) = passed time / percentage
// $percentage_finish = $data_json[PRINTERSTATE_TITLE_PERCENT] / 100;
$calculate_factor = sqrt($data_json[PRINTERSTATE_TITLE_PERCENT] / 100);
$time_estimation = $array_status[CORESTATUS_TITLE_ESTIMATE_T];
$data_json[PRINTERSTATE_TITLE_DURATION] = (int) ($time_estimation * (1 - $calculate_factor) + $time_pass * (1 / $calculate_factor - 1));
}
}
// check operation
if (file_exists(PRINTERSTATE_FILE_PRINT_HEAT)) {
$print_operation = PRINTERSTATE_VALUE_PRINT_OPERATION_HEAT;
} else {
if ($data_json[PRINTERSTATE_TITLE_PERCENT] == 100) {
$print_operation = PRINTERSTATE_VALUE_PRINT_OPERATION_END;
}
}
$data_json[PRINTERSTATE_TITLE_EXTEND_PRM][PRINTERSTATE_TITLE_EXT_OPER] = $print_operation;
}
}
}
}
if ($extra_info == TRUE && $status_current == CORESTATUS_VALUE_IDLE) {
// check if we need to change idle into sliced or not
PrinterState_checkSlicedCondition($data_json);
//TODO add timelapse checking
PrinterState_checkTimelapseCondition($data_json);
}
return $data_json;
}
