function act_updatePositionIndex()
{
set_time_limit(0);
$x_aixs = 80;
$y_aixs = 40;
//$z_aixs = 100;
//$z_step = 100;
$floor = 1;
$f_step = 1;
//清空数据库
PositionModel::delPositonIndex("where storeId=1");
//8级，一列一通道
$x_step8 = 5;
$y_step8 = 2;
$i8 = 0;
$g8 = 1;
while ($i8 < $x_aixs) {
$j = 0;
while ($j <= $y_aixs) {
$k = 0;
while ($k <= $floor) {
$where = "where x_alixs>={$i8} and x_alixs<" . ($i8 + $x_step8) . " and y_alixs<={$j} and y_alixs>" . ($j - $y_step8) . " and floor={$k} and storeId=1";
//$position_info = PositionModel::getPositionList("id","where x_alixs>='{$i8}' and x_alixs<'{($i8+$x_step8)}' and y_alixs>'{($j-$y_step8)}' and floor='{$k}'");
$position_info = PositionModel::getPositionList("id", $where);
if (!empty($position_info)) {
$data = array();
$position_id = '';
foreach ($position_info as $position) {
$position_id .= ',' . $position['id'];
}
$position_id = trim($position_id, ',');
//$position_id = $position_id."-".$j."-".$k."-".$floor."-".$where;
$data = array('level' => 8, 'piece' => $g8, 'positionId' => $position_id);
$insertid = PositionModel::insertPositonIndex($data);
if ($insertid) {
$g8 += 1;
}
}
$k += $f_step;
}
$j += $y_step8;
}
$i8 += $x_step8;
}
//7级，一列两通道
$x_step7 = 5;
$y_step7 = 4;
$i7 = 0;
$g7 = 1;
while ($i7 < $x_aixs) {
$j = 2;
while ($j <= $y_aixs) {
$k = 0;
while ($k <= $floor) {
$where = "where x_alixs>={$i7} and x_alixs<" . ($i7 + $x_step7) . " and y_alixs<={$j} and y_alixs>" . ($j - $y_step7) . " and floor={$k} and storeId=1";
//$position_info = PositionModel::getPositionList("id","where x_alixs>='{$i7}' and x_alixs<'{($i7+$x_step7)}' and y_alixs<='{$j}' and y_alixs>'{($j-$y_step7)}' and floor='{$k}'");
$position_info = PositionModel::getPositionList("id", $where);
if (!empty($position_info)) {
$data = array();
$position_id = '';
foreach ($position_info as $position) {
$position_id .= ',' . $position['id'];
}
$position_id = trim($position_id, ',');
$data = array('level' => 7, 'piece' => $g7, 'positionId' => $position_id);
$insertid = PositionModel::insertPositonIndex($data);
if (insertid) {
$g7 += 1;
}
}
$k += $f_step;
}
$j += $y_step7;
}
$i7 += $x_step7;
}
//6级，两列四通道
$x_step6 = 10;
$y_step6 = 8;
$i6 = 0;
$g6 = 1;
while ($i6 < $x_aixs) {
$j = 6;
while ($j <= $y_aixs) {
$k = 0;
while ($k <= $floor) {
$where = "where x_alixs>={$i6} and x_alixs<" . ($i6 + $x_step6) . " and y_alixs<={$j} and y_alixs>" . ($j - $y_step6) . " and floor={$k} and storeId=1";
//$position_info = PositionModel::getPositionList("id","where x_alixs>='{$i6}' and x_alixs<'{($i6+$x_step6)}' and y_alixs<='{$j}' and y_alixs>'{($j-$y_step6)}' and floor='{$k}'");
$position_info = PositionModel::getPositionList("id", $where);
if (!empty($position_info)) {
$data = array();
$position_id = '';
foreach ($position_info as $position) {
$position_id .= ',' . $position['id'];
}
$position_id = trim($position_id, ',');
$data = array('level' => 6, 'piece' => $g6, 'positionId' => $position_id);
$insertid = PositionModel::insertPositonIndex($data);
if ($insertid) {
$g6 += 1;
}
}
$k += $f_step;
}
$j += $y_step6;
}
$i6 += $x_step6;
}
//5级，两列八通道
$x_step5 = 10;
$y_step5 = 16;
$i5 = 0;
$g5 = 1;
while ($i5 < $x_aixs) {
$j = 14;
while ($j <= $y_aixs) {
$k = 0;
while ($k <= $floor) {
$where = "where x_alixs>={$i5} and x_alixs<" . ($i5 + $x_step5) . " and y_alixs<={$j} and y_alixs>" . ($j - $y_step5) . " and floor={$k} and storeId=1";
//$position_info = PositionModel::getPositionList("id","where x_alixs>='{$i5}' and x_alixs<'{($i5+$x_step5)}' and y_alixs<='{$j}' and y_alixs>'{($j-$y_step5)}' and floor='{$k}'");
$position_info = PositionModel::getPositionList("id", $where);
if (!empty($position_info)) {
$data = array();
$position_id = '';
foreach ($position_info as $position) {
$position_id .= ',' . $position['id'];
}
$position_id = trim($position_id, ',');
$data = array('level' => 5, 'piece' => $g5, 'positionId' => $position_id);
$insertid = PositionModel::insertPositonIndex($data);
if ($insertid) {
$g5 += 1;
}
}
$k += $f_step;
}
$j += $y_step5;
}
$i5 += $x_step5;
}
//4级，南北八通道(切半)
$x_step4 = 40;
$y_step4 = 16;
$i4 = 0;
$g4 = 1;
while ($i4 < $x_aixs) {
$j = 14;
while ($j <= $y_aixs) {
$k = 0;
while ($k <= $floor) {
$where = "where x_alixs>={$i4} and x_alixs<" . ($i4 + $x_step4) . " and y_alixs<={$j} and y_alixs>" . ($j - $y_step4) . " and floor={$k} and storeId=1";
//$position_info = PositionModel::getPositionList("id","where x_alixs>='{$i4}' and x_alixs<'{($i4+$x_step4)}' and y_alixs<='{$j}' and y_alixs>'{($j-$y_step4)}' and floor='{$k}'");
$position_info = PositionModel::getPositionList("id", $where);
if (!empty($position_info)) {
$data = array();
$position_id = '';
foreach ($position_info as $position) {
$position_id .= ',' . $position['id'];
}
$position_id = trim($position_id, ',');
$data = array('level' => 4, 'piece' => $g4, 'positionId' => $position_id);
$insertid = PositionModel::insertPositonIndex($data);
if ($insertid) {
$g4 += 1;
}
}
$k += $f_step;
}
$j += $y_step4;
}
$i4 += $x_step4;
}
//3级，南北区
$x_step3 = 40;
$y_step3 = 40;
$i3 = 0;
$g3 = 1;
while ($i3 < $x_aixs) {
$j = 38;
while ($j <= $y_aixs) {
$k = 0;
while ($k <= $floor) {
$where = "where x_alixs>={$i3} and x_alixs<" . ($i3 + $x_step3) . " and y_alixs<={$j} and y_alixs>" . ($j - $y_step3) . " and floor={$k} and storeId=1";
//$position_info = PositionModel::getPositionList("id","where x_alixs>='{$i3}' and x_alixs<'{($i3+$x_step3)}' and y_alixs<='{$j}' and y_alixs>'{($j-$y_step3)}' and floor='{$k}'");
$position_info = PositionModel::getPositionList("id", $where);
if (!empty($position_info)) {
$data = array();
$position_id = '';
foreach ($position_info as $position) {
$position_id .= ',' . $position['id'];
}
$position_id = trim($position_id, ',');
$data = array('level' => 3, 'piece' => $g3, 'positionId' => $position_id);
$insertid = PositionModel::insertPositonIndex($data);
if ($insertid) {
$g3 += 1;
}
}
$k += $f_step;
}
$j += $y_step3;
}
$i3 += $x_step3;
}
//2级，二三楼
$g2 = 1;
$k = 0;
while ($k <= $floor) {
$position_info = PositionModel::getPositionList("id", "where floor='{$k}' and storeId=1");
if (!empty($position_info)) {
$data = array();
$position_id = '';
foreach ($position_info as $position) {
$position_id .= ',' . $position['id'];
}
$position_id = trim($position_id, ',');
$data = array('level' => 2, 'piece' => $g2, 'positionId' => $position_id);
$insertid = PositionModel::insertPositonIndex($data);
if ($insertid) {
$g2 += 1;
}
}
$k += $f_step;
}
return true;
}
