rename_rrd($device, "sensor-temperature-pcoweb-2.1.2.15.0.rrd", "sensor-temperature-CAREL-ug40cdz-MIB-ssh2-0.rrd");
echo '.';
break;
case '.1.3.6.1.4.1.9839.2.1.2.20.0':
rename_rrd($device, "sensor-temperature-pcoweb-2.1.2.20.0.rrd", "sensor-temperature-CAREL-ug40cdz-MIB-coolSetP-0.rrd");
echo '.';
break;
case '.1.3.6.1.4.1.9839.2.1.2.21.0':
rename_rrd($device, "sensor-temperature-pcoweb-2.1.2.21.0.rrd", "sensor-temperature-CAREL-ug40cdz-MIB-coolDiff-0.rrd");
echo '.';
break;
case '.1.3.6.1.4.1.9839.2.1.2.22.0':
rename_rrd($device, "sensor-temperature-pcoweb-2.1.2.22.0.rrd", "sensor-temperature-CAREL-ug40cdz-MIB-cool2SetP-0.rrd");
echo '.';
break;
case '.1.3.6.1.4.1.9839.2.1.2.23.0':
rename_rrd($device, "sensor-temperature-pcoweb-2.1.2.23.0.rrd", "sensor-temperature-CAREL-ug40cdz-MIB-heatSetP-0.rrd");
echo '.';
break;
case '.1.3.6.1.4.1.9839.2.1.2.24.0':
rename_rrd($device, "sensor-temperature-pcoweb-2.1.2.24.0.rrd", "sensor-temperature-CAREL-ug40cdz-MIB-heat2SetP-0.rrd");
echo '.';
break;
case '.1.3.6.1.4.1.9839.2.1.2.25.0':
rename_rrd($device, "sensor-temperature-pcoweb-2.1.2.25.0.rrd", "sensor-temperature-CAREL-ug40cdz-MIB-heatDiff-0.rrd");
echo '.';
break;
}
}
}
// EOF
$count = count($oids);
foreach ($oids as $index => $entry) {
$printer_supply = dbFetchRow("SELECT * FROM `printersupplies` WHERE `device_id` = ? AND `supply_mib` = ? AND `supply_index` = ?", array($device['device_id'], 'jetdirect', $index));
$marker_descr = "Printed " . nicecase($entry['prtMarkerCounterUnit']);
list($hrDeviceIndex, $prtMarkerIndex) = explode('.', $index);
$options = array('measured_class' => 'printersupply', 'measured_entity' => $printer_supply['supply_id'], 'sensor_unit' => $entry['prtMarkerCounterUnit']);
// Lifetime counter (should be always single)
$descr = "Total {$marker_descr}";
$oid_name = 'prtMarkerLifeCount';
$oid = '.1.3.6.1.2.1.43.10.2.1.4.' . $index;
$value = $entry[$oid_name];
if (isset($entry[$oid_name])) {
// CLEANME. Compatibility, remove in r8500, but not before CE 0.16.8
// Rename olf rrd filename and old ds name
$new_rrd = 'sensor-counter-Printer-MIB-prtMarkerLifeCount-' . $index;
$renamed = rename_rrd($device, 'pagecount', $new_rrd);
if ($renamed) {
rrdtool_rename_ds($device, $new_rrd, 'pagecount', 'sensor');
}
discover_sensor($valid['sensor'], 'counter', $device, $oid, $index, $mib . '-' . $oid_name, $descr, 1, $value, $options);
}
// PowerOn counter
$descr = "PowerOn {$marker_descr}";
if ($prt_supplies[$index]['prtMarkerSuppliesDescription']) {
$descr .= ' - ' . snmp_hexstring($prt_supplies[$index]['prtMarkerSuppliesDescription']);
}
$oid_name = 'prtMarkerPowerOnCount';
$oid = '.1.3.6.1.2.1.43.10.2.1.5.' . $index;
$value = $entry[$oid_name];
discover_sensor($valid['sensor'], 'counter', $device, $oid, $index, $mib . '-' . $oid_name, $descr, 1, $value, $options);
// prtMarkerStatus
["dfCompressSavedPercent"]=> "0"
["df64DedupeSaved"]=> "0"
["dfDedupeSavedPercent"]=> "0"
["df64TotalSaved"]=> "0"
["dfTotalSavedPercent"]=> "0"
["df64TotalReservedKBytes"]=> "263724"
}
*/
foreach ($cache_discovery['netapp-mib'] as $index => $storage) {
$fstype = $storage['dfType'];
$descr = $storage['dfFileSys'];
if (!empty($storage['dfVserver'])) {
// Add server info on cluster devices
$descr .= ' - ' . $storage['dfVserver'];
// CLEANME, remove in r7500, but not before CE 0.16.1
rename_rrd($device, 'storage-netapp-mib-' . $storage['dfFileSys'] . '.rrd', 'storage-netapp-mib-' . $descr . '.rrd');
}
$deny = FALSE;
if (!$deny) {
if (is_numeric($storage['df64TotalKBytes'])) {
$size = $storage['df64TotalKBytes'] * 1024;
$used = $storage['df64UsedKBytes'] * 1024;
$hc = 1;
} else {
$size = $storage['dfKBytesTotal'] * 1024;
$used = $storage['dfKBytesUsed'] * 1024;
$hc = 0;
}
if (is_numeric($index)) {
discover_storage($valid['storage'], $device, $index, $fstype, 'NETAPP-MIB', $descr, 1024, $size, $used, array('storage_hc' => $hc));
}
<?php
/**
* Observium
*
* This file is part of Observium.
*
* @package observium
* @subpackage update
* @copyright (C) 2006-2013 Adam Armstrong, (C) 2013-2016 Observium Limited
*
*/
$devices = dbFetchRows("SELECT * FROM `devices` WHERE os='routeros'");
foreach ($devices as $device) {
$sensors = dbFetchRows("SELECT * FROM `sensors` WHERE device_id=?", array($device['device_id']));
foreach ($sensors as $sensor) {
switch ($sensor['sensor_oid']) {
case '1.3.6.1.4.1.14988.1.1.3.10.0':
rename_rrd($device, "sensor-temperature-routeros-0.rrd", "sensor-temperature-MIKROTIK-MIB-mtxrHlTemperature-0.rrd");
echo '.';
break;
case '1.3.6.1.4.1.14988.1.1.3.8.0':
rename_rrd($device, "sensor-voltage-routeros-0.rrd", "sensor-voltage-MIKROTIK-MIB-mtxrHlVoltage-0.rrd");
echo '.';
break;
}
}
}
// EOF
$precision = 1;
if (isset($entry['scale']) && is_numeric($entry['scale']) && $entry['scale'] != 1) {
// FIXME, currently we support only int precision, need convert all to float scale!
$precision = round(1 / $entry['scale'], 0);
}
$usage = snmp_get($device, $entry['oid'], '-OQUvs', $mib);
$usage = snmp_fix_numeric($usage);
if (is_numeric($usage)) {
if (empty($entry['oid_num'])) {
// Use snmptranslate if oid_num not set
$entry['oid_num'] = snmp_translate($entry['oid'], $mib);
}
if (isset($entry['rename_rrd'])) {
$old_rrd = 'processor-' . $entry['rename_rrd'];
$new_rrd = 'processor-' . $entry_name . '-' . $index;
rename_rrd($device, $old_rrd, $new_rrd);
unset($old_rrd, $new_rrd);
}
discover_processor($valid['processor'], $device, $entry['oid_num'], $index, $entry_name, $descr, $precision, $usage, NULL, NULL, $idle);
$entry['found'] = TRUE;
}
}
unset($processors_array, $processor, $dot_index, $descr, $i);
// Clean up
if (isset($entry['stop_if_found']) && $entry['stop_if_found'] && $entry['found']) {
break;
}
// Stop loop if processor found
}
}
}
*
* @package observium
* @subpackage update
* @copyright (C) 2006-2013 Adam Armstrong, (C) 2013-2016 Observium Limited
*
*/
$devices = dbFetchRows("SELECT * FROM `devices` WHERE os='papouch'");
foreach ($devices as $device) {
$sensors = dbFetchRows("SELECT * FROM `sensors` WHERE device_id=?", array($device['device_id']));
foreach ($sensors as $sensor) {
switch ($sensor['sensor_oid']) {
case '.1.3.6.1.4.1.18248.1.1.1.0':
rename_rrd($device, "sensor-temperature-papouch-tme-1.rrd", "sensor-temperature-TMESNMP2-MIB-int_temperature-0.rrd");
echo '.';
break;
case '.1.3.6.1.4.1.18248.20.1.2.1.1.2.1':
rename_rrd($device, "sensor-temperature-papouch-th2e-1.rrd", "sensor-temperature-the_v01-MIB-inChValue-1.rrd");
echo '.';
break;
case '.1.3.6.1.4.1.18248.20.1.2.1.1.2.2':
rename_rrd($device, "sensor-humidity-papouch-th2e-1.rrd", "sensor-humidity-the_v01-MIB-inChValue-2.rrd");
echo '.';
break;
case '.1.3.6.1.4.1.18248.20.1.2.1.1.2.3':
rename_rrd($device, "sensor-temperature-papouch-th2e-3.rrd", "sensor-temperature-the_v01-MIB-inChValue-3.rrd");
echo '.';
break;
}
}
}
// EOF
<?php
/**
* Observium
*
* This file is part of Observium.
*
* @package observium
* @subpackage discovery
* @copyright (C) 2006-2013 Adam Armstrong, (C) 2013-2016 Observium Limited
*
*/
$value = snmp_get($device, 'jnxYellowAlarmState.0', '-Oqv', 'JUNIPER-ALARM-MIB');
if ($value !== '') {
$descr = 'Yellow Alarm';
$oid = '.1.3.6.1.4.1.2636.3.4.2.2.1.0';
rename_rrd($device, 'status-juniper-alarm-state-jnxYellowAlarmState.0', 'status-juniper-yellow-state-jnxYellowAlarmState.0');
discover_sensor($valid['sensor'], 'state', $device, $oid, 'jnxYellowAlarmState.0', 'juniper-yellow-state', $descr, NULL, $value, array('entPhysicalClass' => 'other'));
}
$value = snmp_get($device, 'jnxRedAlarmState.0', '-Oqv', 'JUNIPER-ALARM-MIB');
if ($value !== '') {
$descr = 'Red Alarm';
$oid = '.1.3.6.1.4.1.2636.3.4.2.3.1.0';
discover_sensor($valid['sensor'], 'state', $device, $oid, 'jnxRedAlarmState.0', 'juniper-alarm-state', $descr, NULL, $value, array('entPhysicalClass' => 'other'));
}
// EOF
<?php
/**
* Observium
*
* This file is part of Observium.
*
* @package observium
* @subpackage update
* @copyright (C) 2006-2013 Adam Armstrong, (C) 2013-2016 Observium Limited
*
*/
// This is is a fix for incorrect rrd file rename after r7839
foreach (dbFetchRows("SELECT * FROM `devices` WHERE `os` = ? OR `os` = ?;", array('nos', 'fabos')) as $entry) {
$status = rename_rrd($entry, 'processor-swCpuOrMemoryUsage-1.rrd', 'processor-swCpuUsage-0.rrd');
if ($status) {
echo '.';
force_discovery($entry);
}
}
// EOF
<?php
/**
* Observium
*
* This file is part of Observium.
*
* @package observium
* @subpackage discovery
* @copyright (C) 2006-2013 Adam Armstrong, (C) 2013-2016 Observium Limited
*
*/
// CPU Memory
//
// agentSwitchCpuProcessMemFree.0 = INTEGER: 343320
// agentSwitchCpuProcessMemAvailable.0 = INTEGER: 1034740
$free = snmp_get($device, 'agentSwitchCpuProcessMemFree.0', '-OUvq', $mib);
$total = snmp_get($device, 'agentSwitchCpuProcessMemAvailable.0', '-OUvq', $mib);
$used = $total - $free;
if (is_numeric($free)) {
rename_rrd($device, 'mempool-dell-vendor-mib-0', 'mempool-dnos-switching-mib-0.rrd');
discover_mempool($valid['mempool'], $device, 0, $mib, 'System Memory', 1024, $total, $used);
}
unset($total, $used, $free);
// EOF
rrdtool_rename_ds($device, $supply_rrd, 'drum', 'level');
}
} else {
if (stristr($supply['supply_descr'], 'transfer') !== FALSE) {
$old_rrd = 'transferroller.rrd';
rename_rrd($device, $old_rrd, $supply_rrd);
}
}
break;
case 'wastetoner':
$old_rrd = 'wastebox.rrd';
rename_rrd($device, $old_rrd, $supply_rrd);
break;
case 'fuser':
$old_rrd = 'fuser.rrd';
rename_rrd($device, $old_rrd, $supply_rrd);
break;
}
// END CLEANME
echo $supplyperc . " %\n";
rrdtool_update_ng($device, 'toner', array('level' => $supplyperc), $supply['supply_index']);
if ($supplyperc > $supply['supply_value']) {
log_event('Printer supply ' . $supply['supply_descr'] . ' (type ' . nicecase($supply['supply_type']) . ') was replaced (new level: ' . $supplyperc . '%)', $device, 'toner', $supply['supply_id']);
}
dbUpdate(array('supply_value' => $supplyperc, 'supply_capacity' => $supply['supply_capacity']), 'printersupplies', '`supply_id` = ?', array($supply['supply_id']));
check_entity('printersupply', $supply, array('supply_value' => $supplyperc));
$graphs['printersupplies'] = TRUE;
}
// Old stuff, to replace?
$oid = get_dev_attrib($device, 'pagecount_oid');
if ($oid) {
if (isset($ups_array[$phase]['upsOutputCurrent'])) {
$oid = ".1.3.6.1.2.1.33.1.4.4.1.3.{$index}";
# UPS-MIB:upsOutputCurrent.$index
discover_sensor($valid['sensor'], 'current', $device, $oid, "upsOutputEntry." . $index, 'ups-mib', $descr, $scale_current, $ups_array[$phase]['upsOutputCurrent']);
}
## Output power
if (isset($ups_array[$phase]['upsOutputPower'])) {
$oid = ".1.3.6.1.2.1.33.1.4.4.1.4.{$index}";
# UPS-MIB:upsOutputPower.$index
//discover_sensor($valid['sensor'], 'apower', $device, $oid, "upsOutputEntry.".$index, 'ups-mib', $descr, 1, $ups_array[$phase]['upsOutputPower']);
discover_sensor($valid['sensor'], 'power', $device, $oid, "upsOutputEntry." . $index, 'ups-mib', $descr, 1, $ups_array[$phase]['upsOutputPower']);
}
if (isset($ups_array[$phase]['upsOutputPercentLoad'])) {
$oid = ".1.3.6.1.2.1.33.1.4.4.1.5.{$index}";
# UPS-MIB:upsOutputPercentLoad.$index
rename_rrd($device, "sensor-capacity-ups-mib-upsOutputPercentLoad.{$index}", "sensor-load-ups-mib-upsOutputPercentLoad.{$index}");
discover_sensor($valid['sensor'], 'load', $device, $oid, "upsOutputPercentLoad.{$index}", 'ups-mib', $descr, 1, $ups_array[$phase]['upsOutputPercentLoad']);
}
# Bypass
if ($ups_array[0]['upsBypassNumLines'] > 0) {
$descr = "Bypass";
if ($ups_array[0]['upsBypassNumLines'] > 1) {
$descr .= " Phase {$index}";
}
## Bypass voltage
if (isset($ups_array[$phase]['upsBypassVoltage'])) {
$oid = ".1.3.6.1.2.1.33.1.5.3.1.2.{$index}";
# UPS-MIB:upsBypassVoltage.$index
discover_sensor($valid['sensor'], 'voltage', $device, $oid, "upsBypassEntry." . $index, 'ups-mib', $descr, 1, $ups_array[$phase]['upsBypassVoltage']);
}
## Bypass current
$tunnel['cipSecTunInOctets'] = $tunnel['cipSecTunHcInOctets'];
$tunnel['cipSecTunInDecompOctets'] = $tunnel['cipSecTunHcInDecompOctets'];
$tunnel['cipSecTunOutOctets'] = $tunnel['cipSecTunHcOutOctets'];
$tunnel['cipSecTunOutUncompOctets'] = $tunnel['cipSecTunHcOutUncompOctets'];
} else {
$table_row[] = "%rno%n";
}
if ($ike_exist) {
//$rrd_index = $local_address . '-' . $peer_address . '-' . $tunnel_endpt_hash;
$rrd_index = $db_index . '-' . $tunnel_endpt_hash;
// FIXME, remove later
//rename_rrd($device, 'ipsectunnel-'.$tunnel['cikeTunLocalName'], 'ipsectunnel-'.$rrd_index);
rename_rrd($device, 'ipsectunnel-' . $peer_address, 'ipsectunnel-' . $rrd_index);
if ($rrd_change_hash) {
// rename if tunnel endpoints changed
rename_rrd($device, 'ipsectunnel-' . $rrd_index, 'ipsectunnel-' . $db_index . '-' . $rrd_change_hash);
$rrd_index = $db_index . '-' . $rrd_change_hash;
}
rrdtool_update_ng($device, 'cipsec-tunnels', array('TunInOctets' => $tunnel['cipSecTunInOctets'], 'TunInDecompOctets' => $tunnel['cipSecTunInDecompOctets'], 'TunInPkts' => $tunnel['cipSecTunInPkts'], 'TunInDropPkts' => $tunnel['cipSecTunInDropPkts'], 'TunInReplayDropPkts' => $tunnel['cipSecTunInReplayDropPkts'], 'TunInAuths' => $tunnel['cipSecTunInAuths'], 'TunInAuthFails' => $tunnel['cipSecTunInAuthFails'], 'TunInDecrypts' => $tunnel['cipSecTunInDecrypts'], 'TunInDecryptFails' => $tunnel['cipSecTunInDecryptFails'], 'TunOutOctets' => $tunnel['cipSecTunOutOctets'], 'TunOutUncompOctets' => $tunnel['cipSecTunOutUncompOctets'], 'TunOutPkts' => $tunnel['cipSecTunOutPkts'], 'TunOutDropPkts' => $tunnel['cipSecTunOutDropPkts'], 'TunOutAuths' => $tunnel['cipSecTunOutAuths'], 'TunOutAuthFails' => $tunnel['cipSecTunOutAuthFails'], 'TunOutEncrypts' => $tunnel['cipSecTunOutEncrypts'], 'TunOutEncryptFails' => $tunnel['cipSecTunOutEncryptFails']), $rrd_index);
$graphs['ipsec_tunnels'] = TRUE;
}
$table_rows[] = $table_row;
unset($table_row);
unset($tunnels_db[$db_index][$tunnel_endpt_hash]);
$valid['ipsec_tunnels'][$db_index][$db_insert['tunnel_endhash']] = 1;
}
print_cli_table($table_rows, $table_headers);
unset($table_rows, $table_headers);
foreach ($tunnels_db as $entry) {
foreach ($entry as $tunnel) {
//echo "will delete tunnel: ".$tunnel['local_addr']."/".$tunnel['peer_addr']." with id:".$tunnel['tunnel_id']."". PHP_EOL;
echo '.';
break;
case '1.3.6.1.4.1.2254.2.4.10.1.0':
rename_rrd($device, 'sensor-temperature-DeltaUPS-10.1.0.rrd', 'sensor-temperature-DeltaUPS-MIB-dupsEnvTemperature-0.rrd');
echo '.';
break;
case '1.3.6.1.4.1.2254.2.4.7.9.0':
rename_rrd($device, 'sensor-temperature-DeltaUPS-7.9.0.rrd', 'sensor-temperature-DeltaUPS-MIB-dupsTemperature-0.rrd');
echo '.';
break;
case '1.3.6.1.4.1.2254.2.4.7.6.0':
rename_rrd($device, 'sensor-voltage-DeltaUPS-7.6.0.rrd', 'sensor-voltage-DeltaUPS-MIB-dupsBatteryVoltage-0.rrd');
echo '.';
break;
case '1.3.6.1.4.1.2254.2.4.5.4.0':
rename_rrd($device, 'sensor-voltage-DeltaUPS-5.4.0.rrd', 'sensor-voltage-DeltaUPS-MIB-dupsOutputVoltage1-0.rrd');
echo '.';
break;
case '1.3.6.1.4.1.2254.2.4.4.3.0':
rename_rrd($device, 'sensor-voltage-DeltaUPS-4.3.0.rrd', 'sensor-voltage-DeltaUPS-MIB-dupsInputVoltage1-0.rrd');
echo '.';
break;
case '1.3.6.1.4.1.2254.2.4.6.3.0':
rename_rrd($device, 'sensor-voltage-DeltaUPS-6.3.0.rrd', 'sensor-voltage-DeltaUPS-MIB-dupsBypassVoltage1-0.rrd');
echo '.';
break;
}
force_discovery($device, array('sensors'));
}
}
// EOF
$descr = 'Over Load';
$oid_name = 'upsmgOutputOverLoad';
$oid_num = '.1.3.6.1.4.1.705.1.7.10.0';
$type = 'mge-status-state';
$value = $entry[$oid_name];
rename_rrd($device, "status-{$type}-{$oid_name}.{$index_rename}", "status-{$type}-{$oid_name}.{$index}");
discover_status($device, $oid_num, $oid_name . '.' . $index, $type, $descr, $value, array('entPhysicalClass' => 'other'));
}
// MG-SNMP-UPS-MIB::upsmgOutputOverTemp.0 = INTEGER: no(2)
if (isset($entry['upsmgOutputOverTemp'])) {
$descr = 'Over Temperature';
$oid_name = 'upsmgOutputOverTemp';
$oid_num = '.1.3.6.1.4.1.705.1.7.11.0';
$type = 'mge-status-state';
$value = $entry[$oid_name];
rename_rrd($device, "status-{$type}-{$oid_name}.{$index_rename}", "status-{$type}-{$oid_name}.{$index}");
discover_status($device, $oid_num, $oid_name . '.' . $index, $type, $descr, $value, array('entPhysicalClass' => 'other'));
}
// MG-SNMP-UPS-MIB::upsmgOutputOnBuck.0 = INTEGER: 2
$scale = 0.1;
$cache['mge'] = array();
$cache['mge'] = snmpwalk_cache_multi_oid($device, "upsmgOutputPhaseTable", $cache['mge'], "MG-SNMP-UPS-MIB");
$upsmgOutputPhaseNum = snmp_get($device, "upsmgOutputPhaseNum.0", "-Oqv", "MG-SNMP-UPS-MIB");
foreach ($cache['mge'] as $index => $entry) {
$descr = "Output";
if ($upsmgOutputPhaseNum > 1) {
$descr .= " Phase {$index}";
}
if ($index > $upsmgOutputPhaseNum) {
break;
}
print_cli_data_field($mib);
foreach ($config['mibs'][$mib]['status'] as $oid => $oid_data) {
print_cli($oid . ' [');
foreach ($oid_data['indexes'] as $index => $entry) {
$entry['oid'] = $oid;
if (empty($entry['oid_num'])) {
// Use snmptranslate if oid_num not set
$entry['oid_num'] = snmp_translate($oid . '.' . $index, $mib);
}
$value = snmp_get($device, $entry['oid_num'], '-OQUvsn');
if (is_numeric($value)) {
// Fetch description from oid if specified
if (isset($entry['oid_descr'])) {
$entry['descr'] = snmp_get($device, $entry['oid_descr'], '-OQUvs');
}
rename_rrd($device, "status-" . $entry['type'] . '-' . $index, "status-" . $entry['type'] . '-' . "{$oid}.{$index}");
discover_status($device, $entry['oid_num'], "{$oid}.{$index}", $entry['type'], $entry['descr'], $value, array('entPhysicalClass' => $entry['measured']));
}
}
print_cli('] ');
}
print_cli('] ');
}
}
if (OBS_DEBUG > 1 && count($valid['sensor'])) {
print_vars($valid['sensor']);
}
foreach (array_keys($config['sensor_types']) as $type) {
check_valid_sensors($device, $type, $valid['sensor']);
}
if (OBS_DEBUG > 1 && count($valid['status'])) {
force_discovery($entry);
echo '.';
break;
case 'nos':
rename_rrd($entry, 'processor-nos-0.rrd', 'processor-swCpuUsage-0.rrd');
force_discovery($entry);
echo '.';
break;
case 'timetra-system-mib':
rename_rrd($entry, 'processor-timetra-system-mib-0.rrd', 'processor-sgiCpuUsage-0.rrd');
force_discovery($entry);
echo '.';
break;
case 'screenos':
rename_rrd($entry, 'processor-screenos-0.rrd', 'processor-nsResCpuLast5Min-0.rrd');
force_discovery($entry);
echo '.';
break;
case 'juniperive':
rename_rrd($entry, 'processor-juniperive-0.rrd', 'processor-iveCpuUtil-0.rrd');
force_discovery($entry);
echo '.';
break;
case 'gbnplatformoam-mib_cpuidle':
rename_rrd($entry, 'processor-gbnplatformoam-mib_cpuidle-0.rrd', 'processor-cpuIdle-0.rrd');
force_discovery($entry);
echo '.';
break;
}
}
// EOF
