function getData($startStop, $endStop, $startDistance, $endDistance)
{
$showOnlyIndirectRoutes = 1;
// find out the buses that pass through these stops
$checkString = findDistanceBetweenSourceDestination($startStop, $endStop);
$arr = array();
$arr = split(":", $checkString);
$strRoute1 = '';
$strRoute2 = '';
$strRoute3 = '';
$strRoute4 = '';
$minimalDistanceOption7 = 10000;
$minimalDistanceOption8 = 10000;
//print_r($arr);
if ($arr[4] < 0.7) {
$strRoute = '';
$routeDetails = htmlentities($startStop) . ":" . $arr[0] . ":" . $arr[1] . ":" . htmlentities($endStop) . ":" . $arr[2] . ":" . $arr[3] . ":" . $arr[4];
//$st='sdsd';
$strRoute = '<Routes>';
$strRoute = $strRoute . '<Route>';
$strRoute = $strRoute . '<IsDirectRoute>N</IsDirectRoute>';
$strRoute = $strRoute . '<ErrorCode>5</ErrorCode>';
$strRoute = $strRoute . '<RouteDetails>' . $routeDetails . '</RouteDetails>';
$strRoute = $strRoute . '</Route>';
$strRoute = $strRoute . '</Routes>';
return $strRoute;
//echo "The distance is walkable";
} else {
$startBuses = explode(",", getBusesForStopWithFrequency($startStop));
$endBuses = explode(",", getBusesForStopWithFrequency($endStop));
//print_r($startBuses);
//print_r($endBuses);
// for now pick the first entry as the bus number but we need to do some optimization on choosing the buses based on their frequency, the stop number etc
//$arrCommonBuses=getCommonBuses($startBuses,$endBuses,$showOnlyIndirectRoutes);
// print_r($arrCommonBuses);
//echo getJunctionsForIndirectBuses($arrCommonBuses,$startStop,$endStop,$startDistance,$endDistance);
$status = getJunctionsForIndirectBusesRevamp3($startStop, $endStop, $startBuses, $endBuses, $startDistance, $endDistance, 0);
//echo "normal status".$status."<br/>";
// this should not be the case now but just for the sake of eror handling
if ($status == "404" || $status == "405") {
list($endStopDepotName, $endStopDepotDistance) = explode(":", getDepotName($endStop));
list($startStopDepotName, $startStopDepotDistance) = explode(":", getDepotName($startStop));
$startStopStartDepotDistance = $startStopDepotDistance;
$endDepotEndStopDistance = $endStopDepotDistance;
// echo "StartStop=>".$startStop.":".$startStopDepotName.",".$startStopDepotDistance."<br/>EndStop=>".$endStop.":".$endStopDepotName.",".$endStopDepotDistance;
$totalDistanceForCase1 = 10000;
$totalDistanceForCase2 = 10000;
// intension is that it is possible to take only one detour, starting from the start depot
if ($startStopDepotDistance < (double) 7) {
//get the direct buses between the startStop and depot
//echo "first case";
//find direct bus between start stop and start depot + distance
$startStopStartDepotCommonBuses = getBusesCommonBetweenTwoStops($startStop, $startStopDepotName);
if (sizeof($startStopStartDepotCommonBuses) > 0) {
$startStopStartDepotDistance = $startStopDepotDistance;
$startDepotEndStopCommonBuses = getBusesCommonBetweenTwoStops($startStopDepotName, $endStop);
//print_r($startDepotEndStopCommonBuses);
//echo sizeof($startDepotEndStopCommonBuses);
if (sizeof($startDepotEndStopCommonBuses) > 0) {
$startDepotEndStopDistance = distanceBetweenStops($startStopDepotName, $endStop);
$totalDistanceForCase1 = $startDistance + $startStopStartDepotDistance + $startDepotEndStopDistance + $endDistance;
$routeInfoString = "There is no direct or indirect bus availalble between " . $startStop . " and " . $endStop . " We have tried to find a route that takes you to a stop where you can find a bus to your destination. However you might have to travel little offroute to reach to the intermediate stop";
$strRoute1 = '<Routes>';
$strRoute1 = $strRoute1 . '<Route>';
$strRoute1 = $strRoute1 . '<IsDirectRoute>N</IsDirectRoute>';
$strRoute1 = $strRoute1 . '<ErrorCode>7</ErrorCode>';
$strRoute1 = $strRoute1 . "<RouteInfo>" . $routeInfoString . "</RouteInfo>";
$routeDetail = "<StartStop>" . htmlentities($startStop) . "</StartStop>";
$routeDetail = $routeDetail . "<EndStop>" . htmlentities($endStop) . "</EndStop>";
$routeDetail = $routeDetail . "<Depot>" . htmlentities($startStopDepotName) . ":" . getLatitudeLongitude($startStopDepotName) . ":" . getBusesForStop($startStopDepotName) . "</Depot>";
$routeDetail = $routeDetail . "<BusesStartStopAndDepot>" . implode(",", $startStopStartDepotCommonBuses) . "</BusesStartStopAndDepot>";
$routeDetail = $routeDetail . "<BusesEndStopAndDepot>" . implode(",", $startDepotEndStopCommonBuses) . "</BusesEndStopAndDepot>";
$routeDetail = $routeDetail . "<DistanceBetweenDepotAndStartStop>" . $startStopStartDepotDistance . "</DistanceBetweenDepotAndStartStop>";
$routeDetail = $routeDetail . "<DistanceBetweenDepotAndEndStop>" . $startDepotEndStopDistance . "</DistanceBetweenDepotAndEndStop>";
$routeDetail = $routeDetail . "<TotalRouteDistance>" . $totalDistanceForCase1 . "</TotalRouteDistance>";
$routeDetail = $routeDetail . "<UseDepot>1</UseDepot>";
$strRoute1 = $strRoute1 . '<RouteDetails>' . $routeDetail . '</RouteDetails>';
$strRoute1 = $strRoute1 . '</Route>';
$strRoute1 = $strRoute1 . '</Routes>';
// echo $strRoute1;
}
}
}
// check if the detour is from the endpoint side
//2. possible to have startStop->EndDepot->endpoint using Bus1, Bus2
if ($endStopDepotDistance < (double) 7) {
//echo "second case";
//find the direct bus between start stop and end depot +distance
$startStopEndDepotCommonBuses = getBusesCommonBetweenTwoStops($startStop, $endStopDepotName);
//print_r($startStopEndDepotCommonBuses);
if (sizeof($startStopEndDepotCommonBuses) > 0) {
//echo "first condifition";
$startStopEndDepotDistance = distanceBetweenStops($startStop, $endStopDepotName);
$endDepotEndStopCommonBuses = getBusesCommonBetweenTwoStops($endStopDepotName, $endStop);
if (sizeof($endDepotEndStopCommonBuses) > 0) {
//find the direct bus between end depot and the end stop + distnace
$endDepotEndStopDistance = $endStopDepotDistance;
$totalDistanceForCase2 = $startDistance + $startStopEndDepotDistance + $endDepotEndStopDistance + $endDistance;
$routeInfoString = "There is no direct or indirect bus availalble between " . $startStop . " and " . $endStop . ". We have tried to find a route that takes you to a stop where you can find a bus to your destination. However you might have to travel little offroute to reach to the intermediate stop";
$strRoute2 = '<Routes>';
$strRoute2 = $strRoute2 . '<Route>';
$strRoute2 = $strRoute2 . '<IsDirectRoute>N</IsDirectRoute>';
$strRoute2 = $strRoute2 . '<ErrorCode>8</ErrorCode>';
$strRoute2 = $strRoute2 . "<RouteInfo>" . $routeInfoString . "</RouteInfo>";
$routeDetail = "<StartStop>" . htmlentities($startStop) . "</StartStop>";
$routeDetail = $routeDetail . "<EndStop>" . htmlentities($endStop) . "</EndStop>";
$routeDetail = $routeDetail . "<Depot>" . htmlentities($endStopDepotName) . ":" . getLatitudeLongitude($endStopDepotName) . ":" . getBusesForStop($endStopDepotName) . "</Depot>";
$routeDetail = $routeDetail . "<BusesStartStopAndDepot>" . implode(",", $startStopEndDepotCommonBuses) . "</BusesStartStopAndDepot>";
$routeDetail = $routeDetail . "<BusesEndStopAndDepot>" . implode(",", $endDepotEndStopCommonBuses) . "</BusesEndStopAndDepot>";
$routeDetail = $routeDetail . "<DistanceBetweenDepotAndStartStop>" . $startStopEndDepotDistance . "</DistanceBetweenDepotAndStartStop>";
$routeDetail = $routeDetail . "<DistanceBetweenDepotAndEndStop>" . $endDepotEndStopDistance . "</DistanceBetweenDepotAndEndStop>";
$routeDetail = $routeDetail . "<TotalRouteDistance>" . $totalDistanceForCase2 . "</TotalRouteDistance>";
$routeDetail = $routeDetail . "<UseDepot>1</UseDepot>";
$strRoute2 = $strRoute2 . '<RouteDetails>' . $routeDetail . '</RouteDetails>';
$strRoute2 = $strRoute2 . '</Route>';
$strRoute2 = $strRoute2 . '</Routes>';
}
}
}
//echo "tt".$totalDistanceForCase1.",".$totalDistanceForCase2;
if ($totalDistanceForCase1 > $totalDistanceForCase2) {
return $strRoute2;
} else {
if ($totalDistanceForCase1 < $totalDistanceForCase2) {
return $strRoute1;
}
}
// if both the start poit detour and the endpoint detour failed that means you dont have the buses either from the
// detour to the endpoint or between the start point and the detour
if ($totalDistanceForCase1 == 10000 && $totalDistanceForCase2 == 10000) {
if ($startStopDepotDistance < (double) 7) {
//echo "hi";
$routeInfoString = "There is no direct or indirect bus availalble between " . $startStop . " and " . $endStop . ". We have tried to find a route that takes you to a stop where you can find a bus to your destination. However you might have to travel little offroute to reach to the intermediate stop";
$startStopStartDepotCommonBuses = getBusesCommonBetweenTwoStops($startStop, $startStopDepotName);
$strRoute3 = '<Routes>';
//$strRoute2=$strRoute2.'<Route>';
$strRoute3 = $strRoute3 . '<IsDirectRoute>N</IsDirectRoute>';
$strRoute3 = $strRoute3 . '<ErrorCode>9</ErrorCode>';
$strRoute3 = $strRoute3 . "<RouteInfo>" . $routeInfoString . "</RouteInfo>";
$routeDetail = "<StartStop>" . htmlentities($startStop) . "</StartStop>";
$routeDetail = $routeDetail . "<EndStop>" . htmlentities($endStop) . "</EndStop>";
$routeDetail = $routeDetail . "<Depot>" . htmlentities($startStopDepotName) . ":" . getLatitudeLongitude($startStopDepotName) . ":" . getBusesForStop($startStopDepotName) . "</Depot>";
$routeDetail = $routeDetail . "<BusesBetweenStopAndDepot>" . implode(",", $startStopStartDepotCommonBuses) . "</BusesBetweenStopAndDepot>";
$routeDetail = $routeDetail . "<DistanceBetweenDepotAndStop>" . $startStopStartDepotDistance . "</DistanceBetweenDepotAndStop>";
// echo "==================";
$startDepotBuses = explode(",", getBusesForStopWithFrequency($startStopDepotName));
$totalDistanceBeforeReachingToDepot = $startDistance + $startStopStartDepotDistance;
$indirectRoutesDetails = getJunctionsForIndirectBusesRevamp3($startStopDepotName, $endStop, $startDepotBuses, $endBuses, 0, $endDistance, $showOnlyIndirectRoutes, 1, $totalDistanceBeforeReachingToDepot);
if ($indirectRoutesDetails != "404" && $indirectRoutesDetails != "405") {
list($indirectBusesBetweenDepotAndEndpoint, $minimalDistanceOption7) = explode("^", $indirectRoutesDetails);
$routeDetail = $routeDetail . "<indirectRoutes>" . $indirectBusesBetweenDepotAndEndpoint . "</indirectRoutes>";
//$routeDetail=$routeDetail."<UseDepot>1</UseDepot>";
$strRoute3 = $strRoute3 . '<RouteDetails>' . $routeDetail . '</RouteDetails>';
//$strRoute2=$strRoute2.'</Route>';
$strRoute3 = $strRoute3 . '</Routes>';
//echo $strRoute3;
} else {
$minimalDistanceOption7 = 10000;
}
}
if ($endStopDepotDistance < (double) 7) {
$routeInfoString = "There is no direct or indirect bus availalble between " . $startStop . " and " . $endStop . ". We have tried to find a route that takes you to a stop where you can find a bus to your destination. However you might have to travel little offroute to reach to the intermediate stop";
$strRoute4 = '<Routes>';
$strRoute4 = $strRoute4 . '<IsDirectRoute>N</IsDirectRoute>';
$strRoute4 = $strRoute4 . '<ErrorCode>10</ErrorCode>';
$strRoute4 = $strRoute4 . "<RouteInfo>" . $routeInfoString . "</RouteInfo>";
$routeDetail = "<StartStop>" . htmlentities($startStop) . "</StartStop>";
$routeDetail = $routeDetail . "<EndStop>" . htmlentities($endStop) . "</EndStop>";
$endDepotEndStopCommonBuses = getBusesCommonBetweenTwoStops($endStopDepotName, $endStop);
$routeDetail = $routeDetail . "<Depot>" . htmlentities($endStopDepotName) . ":" . getLatitudeLongitude($endStopDepotName) . ":" . getBusesForStop($endStopDepotName) . "</Depot>";
$routeDetail = $routeDetail . "<BusesBetweenStopAndDepot>" . implode(",", $endDepotEndStopCommonBuses) . "</BusesBetweenStopAndDepot>";
$routeDetail = $routeDetail . "<DistanceBetweenDepotAndStop>" . $endDepotEndStopDistance . "</DistanceBetweenDepotAndStop>";
// echo "==================";
$endDepotBuses = explode(",", getBusesForStopWithFrequency($endStopDepotName));
$totalDistanceBeforeReachingToDepot = $endDistance + $endDepotEndStopDistance;
$indirectRoutesDetails = getJunctionsForIndirectBusesRevamp3($startStop, $endStopDepotName, $startBuses, $endDepotBuses, $startDistance, 0, $showOnlyIndirectRoutes, 1, $totalDistanceBeforeReachingToDepot);
if ($indirectRoutesDetails != "404" && $indirectRoutesDetails != "405") {
list($indirectBusesBetweenDepotAndEndpoint, $minimalDistanceOption8) = explode("^", $indirectRoutesDetails);
$routeDetail = $routeDetail . "<indirectRoutes>" . $indirectBusesBetweenDepotAndEndpoint . "</indirectRoutes>";
//$routeDetail=$routeDetail."<UseDepot>1</UseDepot>";
$strRoute4 = $strRoute4 . '<RouteDetails>' . $routeDetail . '</RouteDetails>';
//$strRoute2=$strRoute2.'</Route>';
$strRoute4 = $strRoute4 . '</Routes>';
//echo $strRoute3;
} else {
$minimalDistanceOption8 = 10000;
}
} else {
$minimalDistanceOption7 = 10000;
$minimalDistanceOption8 = 10000;
}
}
//echo $minimalDistanceOption7.",".$minimalDistanceOption8;
if ($minimalDistanceOption7 == 10000 && $minimalDistanceOption8 == 10000) {
//the depots are too far away
$strRoute = '<Routes>';
$strRoute = $strRoute . '<Route>';
$strRoute = $strRoute . '<IsDirectRoute>N</IsDirectRoute>';
$strRoute = $strRoute . '<ErrorCode>411</ErrorCode>';
$strRoute = $strRoute . '<StartStop>' . $startStop . '</StartStop>';
$strRoute = $strRoute . '<EndStop>' . $endStop . '</EndStop>';
$strRoute = $strRoute . '</Route>';
$strRoute = $strRoute . '</Routes>';
return $strRoute;
} else {
if ($minimalDistanceOption7 < $minimalDistanceOption8) {
return $strRoute3;
} else {
return $strRoute4;
}
}
} else {
$strRoute = '<Routes>' . $status . '</Routes>';
return $strRoute;
}
}
//echo "<sample>hhhh</sample>";
}
//. Possible to have startStop->StartDepot->EndDepot->endpoint using Bus1, Bus2, Bus3
// or with the indirection startStop->StartDepot->JUNCTION->EndDepot->endpoint
if($startStopDepotDistance < (float)7 && $endStopDepotDistance < (float) 7)
{
//echo "thid case";
//find the direct bus between start stop and end depot +distance
$startStopStartDepotCommonBuses=getBusesCommonBetweenTwoStops($startStop,$startStopDepotName);
//print_r($startStopStartDepotCommonBuses);
$endDepotEndStopCommonBuses=getBusesCommonBetweenTwoStops($endStopDepotName,$endStop);
//print_r($endDepotEndStopCommonBuses);
if(sizeof($startStopStartDepotCommonBuses)>0 && sizeof($endDepotEndStopCommonBuses) >0)
{
//echo "hhh";
//get the buses between the two depots
$busesForStartDepot=explode(",",getBusesForStopWithFrequency($startStopDepotName));
$busesForEndDepot=explode(",",getBusesForStopWithFrequency($endStopDepotName));
$startStopOffsetDistance=$startDistance;
$endStopOffsetDistance=$endDistance;
$startStopStartDepotCommonBusesString=implode(",",$startStopStartDepotCommonBuses);
$endDepotEndStopCommonBusesString=implode(",",$endDepotEndStopCommonBuses);
$interDepotStatus= getJunctionsForInterDepotTravel($startStop,$endStop,$startStopDepotName,$endStopDepotName,$busesForStartDepot,$busesForEndDepot,$startStopOffsetDistance,$endStopOffsetDistance,$startStopStartDepotCommonBusesString,$endDepotEndStopCommonBusesString,$startStopDepotDistance,$endStopDepotDistance,0);
//need to add the bus info between the startstop and depot+last depot and end point
if($interDepotStatus=="409"||$interDepotStatus=="410")
{
// buses not found between the depots using a single or no hop
$strRoute='<Routes>';
$strRoute=$strRoute.'<Route>';
$strRoute=$strRoute.'<IsDirectRoute>N</IsDirectRoute>';
/**
* Get the buses that are common between the two stops
* @param $stopName1
* @param $stopName2
*/
function getBusesCommonBetweenTwoStops($stopName1, $stopName2)
{
//echo $stopName1.",".$stopName2;
//could also use
/*
*
* select * from newBusdetails as B,newBusDetails as A where (A.BusNumber=B.BusNumber) and (A.stopName='Vidyapeetha Circle' and
B.stopName='Kamakya (Depot 13)')
*
*/
//get all the buses for stopName1
$startBuses = getBusesForStopWithFrequency($stopName1);
// echo "start buses";
//print_r($startBuses);
//echo "<br/>";
$startBusesArray = explode(",", $startBuses);
//get all the buses for stopName2
$endBuses = getBusesForStopWithFrequency($stopName2);
//echo "End buses";
//print_r($endBuses);
//echo "<br/>";
$endBusesArray = explode(",", $endBuses);
//get the intersection
$commonBusesArrayTemp = array_intersect($startBusesArray, $endBusesArray);
$commonBusesArray = array();
// echo "common buses between".$stopName1."..and..".$stopName2;
//print_r($commonBuses);
$sizeofCommonBuses = sizeof($commonBusesArrayTemp);
//required to reset the keys from 0
foreach ($commonBusesArrayTemp as $key => $value) {
array_push($commonBusesArray, $value);
}
//print_r($commonBusesArray);
//echo "<br/>";
/*$commonBusesString='';
for($j=0;$j<$sizeofCommonBuses;$j++)
{
if($j==$sizeofCommonBuses-1)
$commonBusesString = $commonBusesString.$commonBuses[$j];
else
$commonBusesString = $commonBusesString.$commonBuses[$j].",";
}
*/
//array_intersect_key()
//need to fix the indexes of the array after the intersection
//echo implode(",",sortBasedOnBusFrequency($commonBusesArray));
//print_r($commonBusesArray);
return sortBasedOnBusFrequency($commonBusesArray);
//echo $commonBusesString;
//return $commonBusesString;
}
function getData($startStop, $endStop, $startDistance, $endDistance)
{
//$showOnlyIndirectRoutes=$_GET['onlyIndirectRoutes'];
// find out the buses that pass through these stops
$checkString = findDistanceBetweenSourceDestination($startStop, $endStop);
$arr = array();
$arr = explode(":", $checkString);
//print_r($arr);
if ($arr[4] < 0.7) {
$strRoute = '';
$routeDetails = htmlentities($startStop) . ":" . $arr[0] . ":" . $arr[1] . ":" . htmlentities($endStop) . ":" . $arr[2] . ":" . $arr[3] . ":" . $arr[4];
//$st='sdsd';
$strRoute = '<Routes>';
$strRoute = $strRoute . '<Route>';
$strRoute = $strRoute . '<IsDirectRoute>N</IsDirectRoute>';
$strRoute = $strRoute . '<ErrorCode>5</ErrorCode>';
$strRoute = $strRoute . '<RouteDetails>' . $routeDetails . '</RouteDetails>';
$strRoute = $strRoute . '</Route>';
$strRoute = $strRoute . '</Routes>';
return $strRoute;
//echo "The distance is walkable";
} else {
$startBuses = explode(",", getBusesForStopWithFrequency($startStop));
$endBuses = explode(",", getBusesForStopWithFrequency($endStop));
//removed the use of the showdirect buses form the helper
$status = getJunctionsForIndirectBusesRevamp2($startStop, $endStop, $startBuses, $endBuses, $startDistance, $endDistance, 0);
//echo "normal status".$status."<br/>";
// this should not be the case now but just for the sake of eror handling
if ($status == "404" || $status == "405") {
list($endStopDepotName, $endStopDepotDistance) = explode(":", getDepotName($endStop));
list($startStopDepotName, $startStopDepotDistance) = explode(":", getDepotName($startStop));
$totalDistanceForCase1 = 10000;
$totalDistanceForCase2 = 10000;
if ($startStopDepotDistance < (double) 7) {
//find direct bus between start stop and start depot + distance
$startStopStartDepotCommonBuses = getBusesCommonBetweenTwoStops($startStop, $startStopDepotName);
if (sizeof($startStopStartDepotCommonBuses) > 0) {
$startStopStartDepotDistance = $startStopDepotDistance;
$startDepotEndStopCommonBuses = getBusesCommonBetweenTwoStops($startStopDepotName, $endStop);
//print_r($startDepotEndStopCommonBuses);
//echo sizeof($startDepotEndStopCommonBuses);
if (sizeof($startDepotEndStopCommonBuses) > 0) {
$startDepotEndStopDistance = distanceBetweenStops($startStopDepotName, $endStop);
$totalDistanceForCase1 = $startDistance + $startStopStartDepotDistance + $startDepotEndStopDistance + $endDistance;
$routeInfoString = "There is no direct or indirect bus availalble between " . $startStop . " and " . $endStop . " We have tried to find a route that takes you to a stop where you can find a bus to your destination. However you might have to travel little offroute to reach to the intermediate stop";
$strRoute1 = '<Routes>';
$strRoute1 = $strRoute1 . '<Route>';
$strRoute1 = $strRoute1 . '<IsDirectRoute>N</IsDirectRoute>';
$strRoute1 = $strRoute1 . '<ErrorCode>7</ErrorCode>';
$strRoute1 = $strRoute1 . "<RouteInfo>" . $routeInfoString . "</RouteInfo>";
$routeDetail = "<StartStop>" . htmlentities($startStop) . "</StartStop>";
$routeDetail = $routeDetail . "<EndStop>" . htmlentities($endStop) . "</EndStop>";
$routeDetail = $routeDetail . "<Depot>" . htmlentities($startStopDepotName) . ":" . getLatitudeLongitude($startStopDepotName) . "</Depot>";
$routeDetail = $routeDetail . "<BusesStartStopAndDepot>" . implode(",", $startStopStartDepotCommonBuses) . "</BusesStartStopAndDepot>";
$routeDetail = $routeDetail . "<BusesEndStopAndDepot>" . implode(",", $startDepotEndStopCommonBuses) . "</BusesEndStopAndDepot>";
$routeDetail = $routeDetail . "<DistanceBetweenDepotAndStartStop>" . $startStopStartDepotDistance . "</DistanceBetweenDepotAndStartStop>";
$routeDetail = $routeDetail . "<DistanceBetweenDepotAndEndStop>" . $startDepotEndStopDistance . "</DistanceBetweenDepotAndEndStop>";
$routeDetail = $routeDetail . "<TotalRouteDistance>" . $totalDistanceForCase1 . "</TotalRouteDistance>";
$routeDetail = $routeDetail . "<UseDepot>1</UseDepot>";
$strRoute1 = $strRoute1 . '<RouteDetails>' . $routeDetail . '</RouteDetails>';
$strRoute1 = $strRoute1 . '</Route>';
$strRoute1 = $strRoute1 . '</Routes>';
// echo $strRoute1;
}
}
}
// check if the detour is from the endpoint side
//2. possible to have startStop->EndDepot->endpoint using Bus1, Bus2
if ($endStopDepotDistance < (double) 7) {
//echo "second case";
//find the direct bus between start stop and end depot +distance
$startStopEndDepotCommonBuses = getBusesCommonBetweenTwoStops($startStop, $endStopDepotName);
//print_r($startStopEndDepotCommonBuses);
if (sizeof($startStopEndDepotCommonBuses) > 0) {
//echo "first condifition";
$startStopEndDepotDistance = distanceBetweenStops($startStop, $endStopDepotName);
$endDepotEndStopCommonBuses = getBusesCommonBetweenTwoStops($endStopDepotName, $endStop);
if (sizeof($endDepotEndStopCommonBuses) > 0) {
//find the direct bus between end depot and the end stop + distnace
$endDepotEndStopDistance = $endStopDepotDistance;
$totalDistanceForCase2 = $startDistance + $startStopEndDepotDistance + $endDepotEndStopDistance + $endDistance;
$routeInfoString = "There is no direct or indirect bus availalble between " . $startStop . " and " . $endStop . ". We have tried to find a route that takes you to a stop where you can find a bus to your destination. However you might have to travel little offroute to reach to the intermediate stop";
$strRoute2 = '<Routes>';
$strRoute2 = $strRoute2 . '<Route>';
$strRoute2 = $strRoute2 . '<IsDirectRoute>N</IsDirectRoute>';
$strRoute2 = $strRoute2 . '<ErrorCode>8</ErrorCode>';
$strRoute1 = $strRoute1 . "<RouteInfo>" . $routeInfoString . "</RouteInfo>";
$routeDetail = "<StartStop>" . htmlentities($startStop) . "</StartStop>";
$routeDetail = $routeDetail . "<EndStop>" . htmlentities($endStop) . "</EndStop>";
$routeDetail = $routeDetail . "<Depot>" . htmlentities($endStopDepotName) . ":" . getLatitudeLongitude($endStopDepotName) . "</Depot>";
$routeDetail = $routeDetail . "<BusesStartStopAndDepot>" . implode(",", $startStopEndDepotCommonBuses) . "</BusesStartStopAndDepot>";
$routeDetail = $routeDetail . "<BusesEndStopAndDepot>" . implode(",", $endDepotEndStopCommonBuses) . "</BusesEndStopAndDepot>";
$routeDetail = $routeDetail . "<DistanceBetweenDepotAndStartStop>" . $startStopEndDepotDistance . "</DistanceBetweenDepotAndStartStop>";
$routeDetail = $routeDetail . "<DistanceBetweenDepotAndEndStop>" . $endDepotEndStopDistance . "</DistanceBetweenDepotAndEndStop>";
$routeDetail = $routeDetail . "<TotalRouteDistance>" . $totalDistanceForCase2 . "</TotalRouteDistance>";
$routeDetail = $routeDetail . "<UseDepot>1</UseDepot>";
$strRoute2 = $strRoute2 . '<RouteDetails>' . $routeDetail . '</RouteDetails>';
$strRoute2 = $strRoute2 . '</Route>';
$strRoute2 = $strRoute2 . '</Routes>';
// echo $strRoute2;
}
}
}
if ($totalDistanceForCase1 < 10000 && $totalDistanceForCase2 < 10000) {
if ($totalDistanceForCase1 > $totalDistanceForCase2) {
return $strRoute2;
} else {
return $strRoute1;
}
} else {
if ($totalDistanceForCase1 == 10000 && $totalDistanceForCase2 == 10000) {
if ($startStopDepotDistance < (double) 7 && $endStopDepotDistance < (double) 7) {
//find the direct bus between start stop and end depot +distance
$startStopStartDepotCommonBuses = getBusesCommonBetweenTwoStops($startStop, $startStopDepotName);
//print_r($startStopStartDepotCommonBuses);
$endDepotEndStopCommonBuses = getBusesCommonBetweenTwoStops($endStopDepotName, $endStop);
//print_r($endDepotEndStopCommonBuses);
if (sizeof($startStopStartDepotCommonBuses) > 0 && sizeof($endDepotEndStopCommonBuses) > 0) {
//echo "hhh";
//get the buses between the two depots
$busesForStartDepot = explode(",", getBusesForStopWithFrequency($startStopDepotName));
$busesForEndDepot = explode(",", getBusesForStopWithFrequency($endStopDepotName));
$startStopOffsetDistance = $startDistance;
$endStopOffsetDistance = $endDistance;
$startStopStartDepotCommonBusesString = implode(",", $startStopStartDepotCommonBuses);
$endDepotEndStopCommonBusesString = implode(",", $endDepotEndStopCommonBuses);
$interDepotStatus = getJunctionsForInterDepotTravel($startStop, $endStop, $startStopDepotName, $endStopDepotName, $busesForStartDepot, $busesForEndDepot, $startStopOffsetDistance, $endStopOffsetDistance, $startStopStartDepotCommonBusesString, $endDepotEndStopCommonBusesString, $startStopDepotDistance, $endStopDepotDistance, 0);
//need to add the bus info between the startstop and depot+last depot and end point
if ($interDepotStatus == "409" || $interDepotStatus == "410") {
// buses not found between the depots using a single or no hop
$strRoute = '<Routes>';
$strRoute = $strRoute . '<Route>';
$strRoute = $strRoute . '<IsDirectRoute>N</IsDirectRoute>';
$strRoute = $strRoute . '<ErrorCode>' . $interDepotStatus . '</ErrorCode>';
$strRoute = $strRoute . '</Route>';
$strRoute = $strRoute . '</Routes>';
return $strRoute;
} else {
$strRoute = $interDepotStatus;
return $strRoute;
}
}
} else {
//the depots are too far away
$strRoute = '<Routes>';
$strRoute = $strRoute . '<Route>';
$strRoute = $strRoute . '<IsDirectRoute>N</IsDirectRoute>';
$strRoute = $strRoute . '<ErrorCode>411</ErrorCode>';
$strRoute = $strRoute . '</Route>';
$strRoute = $strRoute . '</Routes>';
return $strRoute;
}
}
}
} else {
return $status;
}
}
//echo "<sample>hhhh</sample>";
}
