Esempio n. 1
0
 * @author     Adam Armstrong <*****@*****.**>
 * @copyright  (C) 2006-2014 Adam Armstrong
 *
 */
// Minimum allowed age for delete RRDs is 24h
$cutoff = age_to_unixtime($config['housekeeping']['rrd']['age'], age_to_seconds('24h'));
if ($cutoff || $config['housekeeping']['rrd']['invalid']) {
    if ($prompt) {
        $msg = "RRD files:" . PHP_EOL;
        if ($config['housekeeping']['rrd']['invalid']) {
            $msg .= " - not valid RRD" . PHP_EOL;
        }
        if ($cutoff) {
            $msg .= " - not modified since " . format_unixtime($cutoff) . PHP_EOL;
        }
        $answer = print_prompt($msg . "will be deleted");
    }
} else {
    print_message("RRD housekeeping disabled in configuration or less than 24h.");
    $answer = FALSE;
}
if ($answer) {
    $count_notvalid = 0;
    $count_notmodified = 0;
    foreach (new RecursiveIteratorIterator(new RecursiveDirectoryIterator($config['rrd_dir'])) as $file) {
        if (basename($file) != "." && basename($file) != ".." && substr($file, -4) == ".rrd") {
            print_debug("Found file ending in '.rrd': " . $file);
            if ($cutoff) {
                $file_data = stat($file);
                if ($file_data['mtime'] < $cutoff) {
                    print_debug("File modification time is " . format_unixtime($file_data['mtime']) . " - deleting");
Esempio n. 2
0
 *
 * @package    observium
 * @subpackage housekeeping
 * @author     Adam Armstrong <*****@*****.**>
 * @copyright  (C) 2006-2014 Adam Armstrong
 *
 */
// Minimum allowed age for delete perfomance times is 24h
$cutoff = age_to_unixtime($config['housekeeping']['timing']['age'], age_to_seconds('24h'));
if ($cutoff) {
    $where = "`start` < {$cutoff}";
    $count_run = dbFetchCell("SELECT COUNT(*) FROM `perf_times` WHERE {$where};");
    $count_dev = dbFetchCell("SELECT COUNT(*) FROM `devices_perftimes` WHERE {$where};");
    if ($count_run || $count_dev) {
        if ($prompt) {
            $answer = print_prompt("Perfomance entries - {$count_run} (per-run) and {$count_dev} (per-device) older than " . format_unixtime($cutoff) . " will be deleted");
        }
        if ($answer) {
            $rows = dbDelete('devices_perftimes', $where);
            if ($rows === FALSE) {
                // Use LIMIT with big tables
                print_debug("Performance table (per-device) is too big, using LIMIT for delete entries");
                $rows = 0;
                $i = 1000;
                while ($i && $rows < $count_dev) {
                    $iter = dbDelete('devices_perftimes', $where . ' LIMIT 1000000');
                    if ($iter === FALSE) {
                        break;
                    }
                    $rows += $iter;
                    $i--;
Esempio n. 3
0
 *   This file is part of Observium.
 *
 * @package    observium
 * @subpackage housekeeping
 * @author     Adam Armstrong <*****@*****.**>
 * @copyright  (C) 2006-2014 Adam Armstrong
 *
 */
// Minimum allowed age for delete syslog entries times is 24h
$cutoff = age_to_unixtime($config['housekeeping']['eventlog']['age'], age_to_seconds('24h'));
if ($cutoff) {
    $where = "UNIX_TIMESTAMP(`timestamp`) < {$cutoff}";
    $count = dbFetchCell("SELECT COUNT(*) FROM `eventlog` WHERE {$where}");
    if ($count) {
        if ($prompt) {
            $answer = print_prompt("{$count} eventlog entries older than " . format_unixtime($cutoff) . " will be deleted");
        }
        if ($answer) {
            $rows = dbDelete('eventlog', $where);
            if ($rows === FALSE) {
                // Use LIMIT with big tables
                print_debug("Event log table is too big, using LIMIT to delete entries");
                $rows = 0;
                $i = 1000;
                while ($i && $rows < $count) {
                    $iter = dbDelete('eventlog', $where . ' LIMIT 1000000');
                    if ($iter === FALSE) {
                        break;
                    }
                    $rows += $iter;
                    $i--;
                logfile("cleanup.log", "Database cleanup for table {$table}: deleted {$count} entries");
            }
        } else {
            if ($prompt) {
                print_message("No orphaned rows found in table {$table}.");
            }
        }
    }
    // Cleanup duplicate entries in the device_graphs table
    foreach (dbFetchRows("SELECT * FROM `device_graphs`") as $entry) {
        $graphs[$entry['device_id']][$entry['graph']][] = $entry['device_graph_id'];
    }
    foreach ($graphs as $device_id => $device_graph) {
        foreach ($device_graph as $graph => $data) {
            if (count($data) > 1) {
                // More than one entry for a single graph type for this device, let's clean up.
                // Leave the first entry intact, chop it off the array
                $device_graph_ids = array_slice($data, 1);
                if ($prompt) {
                    $answer = print_prompt(count($device_graph_ids) . " duplicate graph rows of type {$graph} for device {$device_id} will be deleted");
                }
                if ($answer) {
                    $table_status = dbDelete('device_graphs', "`device_graph_id` IN (?)", array($device_graph_ids));
                    print_debug("Deleted " . count($device_graph_ids) . " duplicate graph rows of type {$graph} for device {$device_id}");
                    logfile("cleanup.log", "Deleted " . count($device_graph_ids) . " duplicate graph rows of type {$graph} for device {$device_id}");
                }
            }
        }
    }
}
// EOF
Esempio n. 5
0
 *   This file is part of Observium.
 *
 * @package    observium
 * @subpackage housekeeping
 * @author     Adam Armstrong <*****@*****.**>
 * @copyright  (C) 2006-2013 Adam Armstrong, (C) 2013-2016 Observium Limited
 *
 */
$cutoff = age_to_unixtime($config['housekeeping']['deleted_ports']['age']);
if ($cutoff) {
    $where = "`deleted` = 1 AND UNIX_TIMESTAMP(`ifLastChange`) < {$cutoff}";
    $ports = dbFetchRows("SELECT `port_id` FROM `ports` WHERE {$where}");
    $count = count($ports);
    if ($count) {
        if ($prompt) {
            $answer = print_prompt("{$count} ports marked as deleted before " . format_unixtime($cutoff) . " will be deleted");
        }
        if ($answer) {
            foreach ($ports as $entry) {
                delete_port($entry['port_id']);
            }
            print_debug("Deleted ports housekeeping: deleted {$count} entries");
            logfile("housekeeping.log", "Deleted ports: deleted {$count} entries older than " . format_unixtime($cutoff));
        }
    } else {
        if ($prompt) {
            print_message("No ports found marked as deleted before " . format_unixtime($cutoff));
        }
    }
} else {
    print_message("Deleted ports housekeeping disabled in configuration.");
Esempio n. 6
0
 *   This file is part of Observium.
 *
 * @package    observium
 * @subpackage housekeeping
 * @author     Adam Armstrong <*****@*****.**>
 * @copyright  (C) 2006-2014 Adam Armstrong
 *
 */
$cutoff = age_to_unixtime($config['housekeeping']['deleted_ports']['age']);
if ($cutoff) {
    $where = "`deleted` = 1 AND UNIX_TIMESTAMP(`ifLastChange`) < {$cutoff}";
    $ports = dbFetchRows("SELECT `port_id` FROM `ports` WHERE {$where}");
    $count = count($ports);
    if ($count) {
        if ($prompt) {
            $answer = print_prompt("{$count} ports marked as 'DELETED' older than " . format_unixtime($cutoff) . " will be deleted");
        }
        if ($answer) {
            foreach ($ports as $entry) {
                delete_port($entry['port_id']);
            }
            print_debug("Deleted ports housekeeping: deleted {$count} entries");
            logfile("housekeeping.log", "Deleted ports: deleted {$count} entries older than " . format_unixtime($cutoff));
        }
    } else {
        if ($prompt) {
            print_message("No deleted ports found older than " . format_unixtime($cutoff));
        }
    }
} else {
    print_message("Deleted ports housekeeping disabled in configuration.");
Esempio n. 7
0
    // Fetch all existing device IDs
    foreach (dbFetch("SELECT `device_id` FROM `devices`") as $device) {
        $devices[] = $device['device_id'];
        if ($device['device_id'] > $max_id) {
            $max_id = $device['device_id'];
        }
    }
    foreach ($config['device_tables'] as $table) {
        $where = '`device_id` NOT IN (' . implode($devices, ',') . ') AND `device_id` < ?';
        if ($table == 'entity_permissions') {
            $where = "`entity_type` = 'device' AND `entity_id` NOT IN (" . implode($devices, ',') . ") AND `entity_id` = ?";
        }
        $rows = dbFetchRows("SELECT 1 FROM `{$table}` WHERE {$where}", array($max_id));
        $count = count($rows);
        if ($count) {
            if ($prompt) {
                $answer = print_prompt("{$count} rows in table {$table} for non-existing devices will be deleted");
            }
            if ($answer) {
                $table_status = dbDelete($table, $where, array($max_id));
                print_debug("Database cleanup for table {$table}: deleted {$count} entries");
                logfile("cleanup.log", "Database cleanup for table {$table}: deleted {$count} entries");
            }
        } else {
            if ($prompt) {
                print_message("No orphaned rows found in table {$table}.");
            }
        }
    }
}
// EOF